Pipe SupportsBrackets / Pipe Supports
L
5"
[117.5]
4
8
[50.8]
2"
FIGURE 7811 - Bracket Channel 1-5/8” Channel 2-HL
Ø 9/16” [14.3]
2 Places
Catalog Number
L Uniform Load*
in. mm Lbs. kN
FNW7811Z1200 12 304.8 570 3.34
FNW7811Z1800 18 457.2 500 2.22
FNW7811Z2400 24 609.6 350 1.56
* When mounted on 12 gauge channel
FIGURE 7701 - 50# Pipe Support
FIGURE 7715 & 7730 - 150# & 300# Pipe Support
Maximum Load: 150 lbs. (Fig. 7715)
300 lbs. (Figure 7730)
Height: 4 inches
Components
Ethafoam® 400 plank - The closed-cell medium density black
polyethylene foam. Ethafoam HS 45 has successfully passed
MVSS 302 ammability testing and meets or exceeds the
requirements for U.S. Federal Standard PPP-C-1752C, Type III.
Ethafoam® is a registered trademark of Sealed Air Corporation (US).
14 Gauge Strut Channel - Cold roll-formed carbon steel conforms
to ASTM 570 GR 33 and ASTM A653.
14 Gauge Galva Neal Sheet Metal - Hot-dipped zinc coated
treated to a harder surface than galvanizing alone.
Bondmaster Instaweld 34-3378 - Adhesive conforms to
MS-CC926.
Maximum Load: 50 lbs.
Height: 4 or 6 inches
Components
Ethafoam® 400 plank - The closed-cell medium density black
polyethylene foam. Ethafoam HS 45 has successfully passed
MVSS 302 ammability testing and meets or exceeds the
requirements for U.S. Federal Standard PPP-C-1752C, Type III.
Ethafoam® is a registered trademark of Sealed Air Corporation (US).
14 Gauge Strut Channel - Cold roll-formed carbon steel conforms
to ASTM 570 GR 33 and ASTM A653.
Bondmaster Instaweld 34-3378 - Adhesive conforms to
MS-CC926.
Catalog Number A B C D E F
FNW7701PP 4.00 10.50 4.00 0.8125 1.1875 1.625
FNW7701UP 6.00 10.50 4.00 0.8125 1.1875 1.625
Catalog Number A B C D E F
FNW7715 4.00 12.00 12.00 1.01 5.16 1.63
FNW7730 4.00 21.50 12.00 1.01 5.16 1.63
FIGURE ELKITC - Elevation Kit for Pipe Supports
1-1/4” Schedule 40 Steel Pipe by Others
ELKIITC Provides elevation to pipe support systems. Kit contains
components for two posts using 1-1/4” schedule 40 steel pipe
supplied by others. Minimum elevation is 6”, or 10” when mounted
on gure 7715 or 7730 pipe supports (sold separately) using
included channel nuts. Kit components include:
• 2 Base Units
• 2 Vertical Mounts
• 10 1/2-13 x 3/4” Hex Bolts
• 6 1/2” Washers
• 4 1/2” Strut Nuts
• 2 1/2” Hex Nuts
18
Catalog Number
FNWELKITC
Phone: 503-287-8383 ~ Fax: 503-281-9677 ~ www.FNW.com
Loading...