FIGURE 7206
BEAM CLAMPS
UL/FM BEAM CLAMP
FEATURES
• Finish: Plain or Plated
• MSS SP-58, type 19
• Material: Ductile Iron ASTM A395
• Hanger rod not included
• 3/8" Universal Design - Allows for use in an upright and inverted position on the top and bottom flange of beam.
E
D
F
FNW
XXX
3/8" M10
or
1/2" M12
REFERENCE CHART
Catalog Number
FNW7206UPC 3/8" or M10 (plain) 1.57" 0.81" 0.39" 0.98" 1.93" 0.79" 4.96 oz 400 lbs
FNW7206UPD 1/2" or M12 (plain) 1.81" 1.06" 0.47" 1.02" 2.20" 0.87" 8.48 oz 500 lbs
FNW7206UZC 3/8" or M10 (plated) 1.57" 0.81" 0.39" 0.98" 1.93" 0.79" 4.96 oz 400 lbs
FNW7206UZD 1/2" or M12 (plated) 1.81" 1.06" 0.47" 1.02" 2.20" 0.87" 8.48 oz 500 lbs
ROD SIZE
XXX T
A B C D E F WT.
MAX. LOAD
(LBS)
Note: Do not overtighten the set screw or the clamp can be damaged. The recommended torque for set screw is 60 lbf-in for 3/8" and 125 lbf-in for 1/2".
FNW.COM
©2019 FNW 0619 1339251 We reserve the right to modify or improve the designs or specifications of our products at any time without notice.
Loading...