FNW 7204, 7806, 7802, 7801, 7868 User Manual
Beam Clamps
1/2" - 13
SET SCREW
[41.3]
5"
1
8
[25.4]
1"
W2
[15.9]
5"
8
[39.7]
9"
16
[31.8]
SET SCREW
X 1
1"
4
1"
4
1
[15.9]
5"
8
W1
RS
9"
32
[7.1]Ø
RS
Beam Clamps
FIGURE 7204 - Wide Mouth Beam Clamp
Finish: Plain
Per: MSS SP-58, type 19
Material: Malleable Iron,
ASTM A47 Grade 32510
Hanger rod not included
Rod Size A B C D E Wt. (0z.)
3/8”-16 1.63” 0.50” 1.88” 1.25” 1.06” 7.65
1/2”-13 1.63” 0.50” 1.88” 1.25” 1.06” 7.65
5/8”-11 2.25” 0.75” 2.31” 1.25” 1.38” 11.25
3/4”-10 2.38” 0.75” 2.38” 1.25” 1.38” 14.11
FIGURE 7868 - Right Angle Clamp
Standard nish is hot dip galvanized
Catalog Number
Pipe Size
Inch Metric
FNW7868Z0050 1/2 15
FNW7868Z0075 3/4 20
FNW7868Z0100 1 25
FNW7868Z0150 1-1/2 40
FNW7868Z0200 2 50
FIGURE 7801 - Window Strut to Beam Clamp
Catalog Number Finish Rod Size Max. Load (Lbs.)
FNW7204PC Plain 3/8”-16 400
FNW7204PD Plain 1/2”-13 500
FNW7204PE Plain 5/8”-11 850
FNW7204PF Plain 3/4”-10 900
Note: Do not overtighten the set screw or the clamp can be damaged. The set
screw should be nger tight, then given approximately an additional 1/4 to 1/3
turn. The recommended set screw torque is 5 ft-lbs (60 in-lbs).
FIGURE 7806 - Universal Beam Clamp
Finish: Zinc
Material: Malleable Iron Hanger rod not included
Catalog Number
FNW7806Z 1/4”-20 100 0.44 250 1.11
Note: The threaded hole on the back side of the clamp is note load rated.
16
Maximum ange thickness of 5/8”
Max Load (W1) Max Load (W2)
Lbs. kN Lbs. kN
Rod Size
(RS)
Phone: 503-287-8383 ~ Fax: 503-281-9677 ~ www.FNW.com
Design load 950 Lbs [4.23 kN] when used in pairs
Catalog Number: FNW7801Z
FIGURE 7802 - Strut to Beam Spreader Caps
Includes 1 adjustable cap and 1 nonadjustable cap
Cut strut length to opening minus 1” [25mm]
Design load 500 Lbs [2.22 kN] when used as a set
Catalog Number: FNW7802Z
Loading...