FNW 7201, 7202, 7203 User Manual

Beam Clamps

Beam Clamps

FIGURE 7201 - Steel Beam C-Clamp

Finish: Plain
MSS SP-58, type 23
Material: Steel, ASTM A283

Hanger rod not included

Catalog Number A B C D E

FNW7201PC 2.13” 0.88” 2.38” 0.75” 0.25”

Rod Size Finish Max. Load Wt. (0z.)

3/8”-16 Plain 400 Lbs. 5.75

FIGURE 7202 - MI Beam C-Clamp

FIGURE 7203 - Jr. Beam Clamp

Finish: Plain or Zinc
MSS SP-58, type 19
Material: Malleable Iron,
ASTM A47 Grade 32510

Hanger rod not included

Rod Size A B C D

3/8”-16 1.88” 1.22” 1.56” 0.75”
1/2”-13 2.06” 1.20” 1.63” 0.75”
5/8”-11 2.19” 1.20” 1.75” 0.75”
3/4”-10 2.38” 1.20” 1.75” 0.75”

Rod Size E F Wt. (0z.)

3/8”-16 0.41” 0.88” 4.94
1/2”-13 0.44” 0.97” 6.81
5/8”-11 0.50” 1.06” 9.17
3/4”-10 0.50” 1.06” 10.93

Finish: Plain or Zinc
Per: MSS SP-58, type 23
Material: Malleable Iron,
ASTM A47 Grade 32510

Hanger rod not included

Rod Size A B C D Wt. (0z.)

3/8”-16 1.75” 0.63” 1.75” 0.75” 3.60
1/2”-13 1.75” 0.63” 1.75” 0.75” 4.09
5/8”-11 2.00” 0.75” 2.00” 0.75” 8.54

Catalog Number Finish Rod Size Max. Load (Lbs.)

FNW7202PC Plain 3/8”-16 400
FNW7202ZC Zinc 3/8”-16 400
FNW7202PD Plain 1/2”-13 400
FNW7202ZD Zinc 1/2”-13 400
FNW7202PE Plain 5/8”-11 440

Note: Do not overtighten the set screw or the clamp can be damaged. The set

screw should be nger tight, then given approximately an additional 1/4 to 1/3

turn. The recommended set screw torque is 5 ft-lbs (60 in-lbs).

Catalog Number Finish Rod Size Max. Load (Lbs.)

FNW7203PC Plain 3/8”-16 400
FNW7203ZC Zinc 3/8”-16 400
FNW7203PD Plain 1/2”-13 500
FNW7203ZD Zinc 1/2”-13 500
FNW7203PE Plain 5/8”-11 600
FNW7203PF Plain 3/4”-10 800

Note: Do not overtighten the set screw or the clamp can be damaged. The set

screw should be nger tight, then given approximately an additional 1/4 to 1/3

turn. The recommended set screw torque is 5 ft-lbs (60 in-lbs).

Phone: [phone] ~ www.FNW.com

17