FNW 7010, 7012 User Manual

Hangers

FIGURE 7010 - Adjustable Swivel Ring Hangers

UL Approved - Sizes 1/2” to 8”
FM Approved - Sizes 3/4” to 8”

Finish: Epoxy Plated
Color: Zinc
MSS SP-58, Type 10

Federal Specication WW-H-171, Type 10

NFPA 13

A - Rod size (hanger rod not included)
B - Center of pipe to top of knured hanger rod nut
C - Rod take out (center of pipe to bottom of hanger

rod

D - Top of pipe to bottom of hanger rod nut

Catalog Number

Pipe Size

in. mm in. mm in. mm in. mm Lbs. kN Lbs.

A

(Rod size)

B C D Design Load Weight

FNW7010EP0050 1/2 21.3 3/8-16UNC 2-7/32 56.36 25/32 19.8 7/8 22.2 300 1.33 0.09
FNW7010EP0075 3/4 26.6 3/8-16UNC 2-7/16 61.91 1-1/32 26.2 1-3/32 27.8 300 1.33 0.09
FNW7010EP0100 1 33.4 3/8-16UNC 2-5/8 66.68 1-7/32 31.0 1-3/16 30.2 300 1.33 0.10
FNW7010EP0125 1-1/4 42.1 3/8-16UNC 2-25/32 70.64 1-3/8 34.9 1-5/32 29.4 300 1.33 0.11
FNW7010EP0150 1-1/2 48.2 3/8-16UNC 2-7/8 73.03 1-7/16 36.5 1-3/32 27.8 300 1.33 0.12
FNW7010EP0200 2 60.3 3/8-16UNC 3-1/32 76.99 1-19/32 40.5 1-1/32 26.2 300 1.33 0.13
FNW7010EP0250 2-1/2 73 3/8-16UNC 3-31/32 100.81 2-9/16 65.1 1-23/32 43.7 525 4.45 0.29
FNW7010EP0300 3 88.9 3/8-16UNC 4-15/32 113.51 3-1/16 77.8 1-15/16 49.2 525 4.45 0.33
FNW7010EP0350 3-1/2 101.6 3/8-16UNC 4-15/16 125.41 3-17/32 89.7 2-1/8 54.0 585 4.45 0.37
FNW7010EP0400 4 114.3 3/8-16UNC 5-9/32 134.14 3-27/32 97.6 2-3/16 55.6 650 4.89 0.39
FNW7010EP0500 5 141.3 1/2-13UNC 5-31/32 151.61 4-7/16 112.7 2-1/4 57.2 1000 4.89 0.53
FNW7010EP0600 6 168.2 1/2-13UNC 7 177.80 5-1/2 139.7 2-3/4 69.9 1000 5.56 0.72
FNW7010EP0800 8 219 1/2-13UNC 7-31/32 202.41 6-7/16 163.5 2-23/32 69.1 1000 5.56 1.04

FIGURE 7012 - Felt Lined Adjustable Swivel Ring Hangers

UL Approved - Sizes 1/2” to 4”
FM Approved - Sizes 3/4” to 4”
NFPA Rod - Sizes 1/2” to 4” *

Finish: Epoxy Plated
Color: Zinc
MSS SP-58, Type 10

Federal Specication WW-H-171, Type 10

NFPA 13

* Note: For 2-1/2” to 4” hangers with NFPA

rod sizes, use gure number 7012N

Catalog Number

Pipe Size

in. mm in. mm in. mm in. mm Lbs. kN Lbs.

(Rod size)

A

B C D Design Load Weight

A - Rod size (hanger rod not included)
B - Center of pipe to top of knured hanger rod nut
C - Rod take out (center of pipe to bottom of hanger

rod

D - Top of pipe to bottom of hanger rod nut

FNW7012EP0050 1/2 21.3 3/8-16UNC 2-7/32 56.36 25/32 19.8 7/8 22.2 300 1.33 0.089
FNW7012EP0075 3/4 26.6 3/8-16UNC 2-7/16 61.91 1-1/32 26.2 1-3/32 27.8 300 1.33 0.095
FNW7012EP0100 1 33.4 3/8-16UNC 2-5/8 66.68 1-7/32 31.0 1-3/16 30.2 300 1.33 0.100
FNW7012EP0125 1-1/4 42.1 3/8-16UNC 2-25/32 70.64 1-3/8 34.9 1-5/32 29.4 300 1.33 0.112
FNW7012EP0150 1-1/2 48.2 3/8-16UNC 2-7/8 73.03 1-7/16 36.5 1-3/32 27.8 300 1.33 0.121
FNW7012EP0200 2 60.3 3/8-16UNC 3-1/32 76.99 1-19/32 40.5 1-1/32 26.2 300 1.33 0.130
FNW7012EP0250 2-1/2 73 1/2-13UNC 3-31/32 100.81 2-9/16 65.1 1-23/32 43.7 1000 2.34 0.323
FNW7012EP0300 3 88.9 1/2-13UNC 4-15/32 113.51 3-1/16 77.8 1-15/16 49.2 1000 2.34 0.359

FNW7012EP0400 4 114.3 5/8-11UNC 5-9/32 134.14 3-27/32 97.6 2-3/16 55.6 1100 2.89 0.474
FNW7012NEP0250* 2-1/2 73 3/8-16UNC 3-31/32 100.81 2-9/16 65.1 1-23/32 43.7 525 2.34 0.323
FNW7012NEP0300* 3 88.9 3/8-16UNC 4-15/32 113.51 3-1/16 77.8 1-15/16 49.2 525 2.34 0.359
FNW7012NEP0400* 4 114.3 3/8-16UNC 5-9/32 134.14 3-27/32 97.6 2-3/16 55.6 650 2.89 0.474

10

Phone: [phone] ~ www.FNW.com