FNW 600 User Manual

Figure 600
STAINLESS STEEL BALL VALVES

2 PC FULL PORT 150# FLANGED

Features:

• Full Port

• RTFE Seats Standard

• Stainless Steel Trim Standard

• Blow-out Proof Stem Design

• AntiStatic Design

• Adjustable Packing

• Removable Stop Plate and Locking Device

Standards:

• API 6D Approved

• API 598

• ANSI B16.5 Class 150 Flanges

• ANSI B16.10 Face to Face Dimensions

• ASME B16.34 Materials

• ISO 5211Actuator Mounting Pad Bolt Circle

• MSS SP-55, SP-61, and SP-72

• Optional Fire Safe to API 607 4th Addition

Pressure (PSIG)

Standard Materials

Ref. No. Description

1 Body ASTM A351 Gr. CF8M 1
2 Ball 316SS 1
3 End Cap ASTM A351 Gr. CF8M 1
4 Seat RTFE (PTFE+15% G.F.) 2
5 Body Seal PTFE Grafoil+316SS 1
6 Stem 316SS 1

7 Stem Packing PTFE Grafoil 1 Set
7A Stem Bushing PTFE 1
7B Bearing PTFE 1

8 Handle ASTM A536 1

9 Snap Ring 304SS 2
9A Stop Plate 304SS 1
10 Thrust Washer PTFE PTFE+Grafoil 1
11 Gland 304SS 1
13 Gland Bolt 304SS 2
17 Body Stud ASTM A193 Gr. B8 4-12
18 Body Nut ASTM A194 Gr. 8 4-12

Material

600 600A

Qty

Figure Number Matrix

FNW 6 0 0 SEAT X

SEAT STYLE

BLANK = STANDARD SEAT

A = API FIRE SAFE SEAT

For other valve materials or
configurations, contact FNW
Valve at [phone] for
sales assistance.

1/2 = D 2-1/2 = L
3/4 = F 3 = M

1-1/4 = H 6 = U
1-1/2 = J 8 = X

Phone: [phone] • Fax: [phone] • www.fnwvalve.com

Cv & Weights Torque

Size Cv Wt. (Lbs)

1/2 26 4

SIZE CODES

1=G 4=P

2=K 10=10

4120 N.E. Columbia Blvd. • Portland Oregon USA 97211

3/4 61 5

1 114 7

1-1/2 268 14

2 501 20

2-1/2 804 31

3 1158 44
4 2118 71
6 5074 168
8 9250* 325

10 15170* 737

Size Torque (in-lbs)

1/2 144
3/4 168

1 216

1-1/2 360

2 500

2-1/2 700

3 816
4 2,640
6 4,800
8 12,000

10 20,357

STAINLESS STEEL BALL VALVES

2 PC FULL PORT 150# FLANGED

Figure 600

Dimensions (Inches)

Size ØB ØC ØD E ØG L H S ØK ØM T1 T2 n ØN

1/2 2.38 1.38 0.50 5.59 3.50 4.25 3.10 0.433 1.65 1/4-20 0.06 0.44 4 0.62
3/4 2.75 1.69 0.75 5.59 3.88 4.62 3.61 0.433 1.65 1/4-20 0.06 0.44 4 0.62

1 3.12 2.00 1.00 5.59 4.25 5.00 3.04 0.551 1.97 1/4-20 0.06 0.44 4 0.62

1-1/2 3.88 2.88 1.50 7.87 5.00 6.50 4.36 0.669 2.76 5/16-18 0.06 0.56 4 0.62

2 4.75 3.62 2.00 7.87 6.00 7.00 4.66 0.669 2.76 5/16-18 0.06 0.62 4 0.75

2-1/2 5.50 4.12 2.50 7.87 7.00 7.50 5.57 0.669 2.76 5/16-18 0.06 0.69 4 0.75

3 6.00 5.00 3.00 12.93 7.50 8.00 6.64 0.866 4.02 3/8-16 0.06 0.75 4 0.75
4 7.50 6.19 4.00 12.93 9.00 9.00 7.55 0.866 4.02 3/8-16 0.06 0.94 8 0.87
6 9.50 8.50 6.00 29.62 11.00 15.50 10.89 1.063 4.92 1/2-13 0.06 1.00 8 0.87
8 11.75 10.62 7.87 39.37 13.50 17.99 11.81 0.866 5.51 5/8-11 0.06 1.12 8 0.87

10 14.25 12.76 9.84 39.37 15.98 21.00 13.78 1.063 6.50 3/4-10 0.06 1.20 12 1.00

DOC: FNWBV60005 Ver. 7/05

© 2005 - FNW. All rights reserved.

The FNW logo is a registered trademark of Ferguson Enterprises, Inc.

The contents of this publication are presented for information purposes only, and while effort has been made to insure their accuracy, they are not to be construed as warranties
or guarantees, expressed or implied, regarding the products or services described herein or their use or applicability. All sales are governed by our terms and conditions, which
are available on request. We reserve the right to modify or improve the designs or specifications of our products at any time without notice.