Figure 490 & 495
Pressure (PSIG)
600
BRASS BODY BALL VALVES
2-PC FULL PORT 600 WOG BALL VALVE
PUMP ISOLATION WITH ROTATING FLANGE
Features
• 600 WOG
• Full Port
• PTFE Seats
• Non-removable Rotating Flange
• Secondary O-ring Stem Seal
• Blow-out Proof Stem
• Adjustable Packing
• Stocked Congurations:
• Fig. 490 - NPT End (3/4" TO 1-1/2")
• Fig. 490D - NPT End w/ Drain (3/4" to 1-1/4"
• Fig. 495 - Sweat End (3/4" to 1-1/2")
• Fig. 495D - Sweat End w/ Drain (3/4" to 1-1/4")
• Drain Features:
• Dual O-ring Stem Seal
• Slotted Stem Operation
(Reduces Accidental Openings)
• Knurled Brass Cap
• Resilient Cap Gasket
• Cap Retainer Strap
• Each Valve Includes:
• Optional Tee Handle (Except 1-1/2")
• Resilient Flange Gasket
• Flange Nuts & Bolts
• NOT FOR USE AT OR BELOW
GROUND LEVEL
Fig. 490
Fig. 490D
Accessories
Fig. 495
Fig. 495D
Weight (lbs)
Size 490 490D 495 495D
3/4 1.47 1.66 1.40 1.57
1 1.89 2.06 1.73 1.92
1-1/4 2.41 2.59 2.17 2.37
1-1/2 3.00 2.82
NPT = 490
Sweat = 495
Figure Number Matrix
FNW 490 D Size
END
Replacement Gasket P/N = FNWPIVFGHJ
CONFIGURATION
Standard Valve = Blank
With Drain = D
SIZE CODE
3/4 = F
1 = G
1-1/4 = H
1-1/2 = J
500
400
300
200
100
14 50 100 150 200
Temperature (°F)
248
WWW.FNW.COM
Figure 490 & 495
H
BRASS BODY BALL VALVES
2-PC FULL PORT 600 WOG BALL VALVE
PUMP ISOLATION WITH ROTATING FLANGE
E
11
7
10
6
2
4
1
3
L
A
B
495-495D
SWEAT END
FLANGE VIEW
CONNECTION
LT
18
17
TEE HANDLE
Dimensions (inches)
Size OD
3/4 0.75 3.03 3.13 3.62 3.43 0.75 2.52 2.11 3.13 0.50
1 0.96 3.39 3.50 4.33 3.50 0.91 2.66 2.46 3.13 0.50
1-1/4 1.18 3.66 3.86 5.41 3.62 0.96 2.80 3.05 3.13 0.50
1-1/2 1.46 4.27 4.65 5.41 1.10 3.15 3.13 0.50
L
NPT Sweat Sweat Drain
E LT
(3/4" to 1-1/4" only)
L1 L2
9
13
8
D
D
L1
H A ØB
L2
21 20 24
26
10
3/4-11.5
23 25 28 27
2212
490D-495D (WITH DRAIN)
Standard Materials
Ref.
No.
Description Material Qty Remarks
1 Body HPb59-3 Brass 1 –
2 Ball HPb58-3 Brass 1 Chrome Pltd
3 Endcap HPb59-3 Brass 1 –
4 Seat PTFE 2 –
6 Stem HPb58-3 Brass 1 –
7 Packing PTFE 1 –
8 Handle Steel 1 Zinc Plated
9 Handle Sleeve Vinyl 1 –
10 Stem O-ring EPDM 1 –
11 Packing Gland Nut HPb58-3 Brass 1 –
12 Flange HPb59-3 Brass 1 –
13 Handle Nut Steel 1 Zinc Plated
14 Flange Bolt Q235 Steel, ZP 2 Not Shown
15 Flange Nut Q235 Steel, ZP 2 Not Shown
16 Flange Gasket NBR 1 Not Shown
17 Tee Handle Steel, Zinc Plated 1 Except 1-1/2"
18 Tee Handle Sleeve Vinyl 1 Except 1-1/2"
20 Drain Stem HPb58-3 Brass 1 With Drain
21 Drain Stem O-ring EPDM 2 With Drain
22 Drain Body HPb59-3 Brass 1 With Drain
23 Drain Seats PTFE 2 With Drain
24 Drain Ball HPb58-3 Brass 1 With Drain
25 Drain Carrier HPb59-3 Brass 1 With Drain
26 Drain Cap HPb58-3 Brass 1 With Drain
27 Drain Cap Gasket EPDM 1 With Drain
28 Drain Cap Retainer Plastic 1 With Drain
DOC: FNW490-49511 Ver. 04/2019
©2019 Ferguson Enterprises, LLC 0419 1253803
The FNW logo is a trademark of Ferguson Enterprises, LLC, PL Sourcing, PO Box 2778, Newport News, VA 23609
The contents of this publication are presented for information purposes only, and while effort has been made to ensure their accuracy, they are not to be construed as warranties or guarantees, expressed or
implied, regarding the products or services described herein or their use or applicability. All sales are governed by our terms and conditions, which are available on request. We reserve the right to modify or
improve the designs or specications of our products at any time without notice. Always verify that you have the most recent product specications or other documentation prior to the installation of these products.
Loading...