FNW 455, 465 User Manual
Figure 455 & 465
BRASS BODY BALL VALVES
3-WAY DIVERTING 400 WOG w/ ISO PAD
Features:
• 400 WOG
• 100 PSI WSP
• T-Port 90° & 180° Flow Path (Fig. 455)
• L-Port 90° Flow Path (Fig. 465)
• Blow-out Proof Stem
• Double Viton® O-ring Stem Seal with
Additional PTFE Seal
• Threaded NPT Ends (Per ANSI B1.20.1)
• Forged Brass Body & End Cap
• Four Seat Design
• O-ring Backed Seats for Reduced
Operating Torque
• Mounting Pad for Direct Mount Actuation
(Per ISO 5211)
• 100% Electronically Tested in Open &
Closed Position at 80 PSI
• Handle Kit Included
• Sizes 1/4” to 2”
NOT FOR USE AT OR BELOW GROUND
LEVEL
Figure Number Matrix
FNW 4 5 5 Size
PORT TYPE
T-PORT = 5
L-PORT = 6
SIZE CODE
1/4 = B
3/8 = C
1/2 = D
3/4 = F
1 = G
1-1/4 = H
1-1/2 = J
2 = K
Includes Handle Kit
90° L-PORT PATTERNS 90° T-PORT PATTERNS
FLOW PLAN A FLOW PLAN D
POSITION 2 POSITION 1
POSITION 1
POSITION 2POSITION 3
POSITION 2 POSITION 1
180° T-PORT PATTERNS
FLOW PLAN IFLOW PLAN H
FLOW PLAN E FLOW PLAN F
FLOW PLAN KFLOW PLAN J
FLOW PLAN G
When requesting
3-way valves with
actuation or limit
switches from FNW,
indicate which ow
plan is desired by
its associated letter.
www.fnw.com
Figure 455 & 465
BRASS BODY BALL VALVES
3-WAY DIVERTING 400 WOG w/ ISO PAD
Dimensions, Cv, Torque & Weight
Size
A ØD L H S ISO 5211 Ød1 455 465
1/4 0.35 0.39 2.64 2.44 0.354 1.42/F03 0.23 3.50 3.26 54 1.3
3/8 0.35 0.43 2.64 2.44 0.354 1.42/F03 0.23 4.08 3.50 54 1.2
1/2 0.35 0.43 2.87 2.44 0.354 1.42/F03 0.23 5.02 4.20 54 1.3
3/4 0.35 0.59 3.19 2.52 0.354 1.42/F03 0.23 7.70 7.00 54 1.5
1 0.43 0.79 3.74 2.95 0.433 1.97/F05 0.27 14.24 12.83 151 2.7
1-1/4 0.43 0.98 4.39 3.17 0.433 1.97/F05 0.27 19.72 18.67 151 4.2
1-1/2 0.43 1.26 4.86 3.66 0.433 1.97/F05 0.27 30.69 29.75 260 6.1
2 0.59 1.57 5.73 4.43 0.551 2.76/F07 0.35 44.58 43.76 285 9.1
DOC: FNWBV45506 Ver. 06/2012
© 2012 - FNW. All rights reserved.
The FNW logo is a trademark of Ferguson Enterprises, Inc., PL Sourcing, PO Box 2778, Newport News, VA 23609
The contents of this publication are presented for information purposes only, and while effort has been made to ensure their accuracy, they are not to be construed as
warranties or guarantees, expressed or implied, regarding the products or services described herein or their use or applicability. All sales are governed by our terms and
conditions, which are available on request. We reserve the right to modify or improve the designs or specications of our products at any time without notice. Always
verify that you have the most recent product specications or other documentation prior to the installation of these products.
Dimensions (inches) Cv
Torque
(in-lbs)
(lbs)
Ref.
Wt
No.
1 Body Brass CW 617N UNI EN 12165 1
2 Ball
3 End Cap Brass CW 617N UNI EN 12165 3
4 Seat PTFE 4
4A
6 Stem Brass CW 614N UNI EN 12164 1
7 Stem Seal PTFE 1
7A Stem O-ring Viton® 2
8 Handle Steel DD11 UNI EN 10111 1
9 Handle Cover Vinyl 1
10 Thrust Washer PTFE 1
12 Handle Washer Nylon 1
13 Handle Screw Steel 1
13A Handle Bushing Brass CW 614N UNI EN 12164 1
Standard Materials
Description Material Qty
Brass CW 617N UNI EN 12165
(Nickel-Chrome Plated)
Seat Backing
O-ring
Viton® 4
1
Loading...