Figure 435
BRASS BODY BALL VALVES
2 PC FULL PORT GAS SERVICE VALVE
w/PRESS ENDS
The FNW gure 435 press valve for gas
service is suggested for all applications
where labor and time savings is a
must. The gure 435 valve allows quick
installation on copper pipelines meeting
ASTM B88 standards*. The structure of
the valve, made in dezincication resistant
brass, provides excellent corrosion
resistance particularly in the connection
areas of the pipeline.
* Note that the gas approvals covering this
valve are for connection to copper pipe
only.
Features:
• 125 PSI Max. Working Pressure for CSA
Approval
• Full Port
• -4°F Minnimum to 140°F Maximum
Temperature at Maximum Pressure
• Press Ends
• Conforms to MSS SP-110 *
• CSA Certied for Gas Applications
• True 2-Piece Design
• No Soldered-In End Pieces
• Blow-out Proof Stem
• Adjustable Packing
• Secondary O-Ring Stem Seal
• Forged Brass Body & End Cap
• 100% Electronically Tested in Open and
Closed Position at 80 PSI
• Uses The Same Handle Accessories As
The Figure 420 Ball Valve
• Sizes 1/2” to 2”
* The current specication SP-110-1996 does
not address the new technology of press end
connections. Other than this exception, the valve
meets the design criteria of the specication.
It is recommended to use the valve in open/close
applications, not mid or modulating services. In
addition, the valve should be operated at least
twice a year.
NOT FOR USE AT OR BELOW
GROUND LEVEL
Locking Handle Kits Stem
Extension Kits
Figure Number Matrix
FNW 435 Size
SIZE CODE
1/2 = D
3/4 = F
1 = G
Kit Codes (Order Separately)
KIT TYPE
Locking Handle = LHK
Stem Extension = SE
Tee Handle = THK
Oval Handle = OHK
Memory Stop = MSK
Stainless Handle = SSHK
Accessories
Tee Handle Kits
Oval Handle Kits
Size Cv Wt (Lbs)
1/2 18 0.49
3/4 34 0.82
1-1/4 = H
1-1/2 = J
2 = K
1-1/4 102 1.98
1-1/2 265 3.40
FNW 420 Kit Size
1-1/4”~1-1/2” = HJ
Memory
Stops
Cv & Weights
1 49 1.25
2 306 4.50
SIZE CODE
1/2” = BD
3/4”~1” = FG
2” = K
Stainless Steel
Handle
www.fnw.com
Figure 435
BRASS BODY BALL VALVES
2 PC FULL PORT GAS SERVICE VALVE
w/PRESS ENDS
Standard Size Dimensions (Inches)
Size E H ØJ ØP ØPFT C D Q L L1 L2
1/2 3.86 1.89 1.30 0.59 0.63 0.67 0.31 0.71 3.13 1.71 1.42
3/4 4.80 2.28 1.54 0.79 0.88 0.83 0.39 0.91 3.66 2.05 1.61
1 4.80 2.44 1.93 0.98 1.13 0.83 0.39 0.94 4.13 2.32 1.81
1-1/4 6.02 3.07 2.32 1.26 1.38 0.83 0.39 1.02 4.41 2.44 1.97
1-1/2 6.02 3.35 2.87 1.57 1.63 1.02 0.49 1.42 5.63 2.91 2.72
2 6.38 3.80 3.39 1.95 2.13 1.20 0.59 1.57 6.52 3.41 3.11
DOC: FNW43508 Ver. 6/2012
© 2012 - FNW. All rights reserved.
The FNW logo is a trademark of Ferguson Enterprises, Inc., PL Sourcing, PO Box 2778, Newport News, VA 23609
The contents of this publication are presented for information purposes only, and while effort has been made to ensure their accuracy, they are not to be construed as
warranties or guarantees, expressed or implied, regarding the products or services described herein or their use or applicability. All sales are governed by our terms and
conditions, which are available on request. We reserve the right to modify or improve the designs or specications of our products at any time without notice. Always verify
that you have the most recent product specications or other documentation prior to the installation of these products.
Ref.
No.
1 Body Brass CW 602N UNI EN 12165 1
1A O-Ring Rubber NBR 2
2 Ball
3 End Cap Brass CW 602N UNI EN 12165 1
4 Seat PTFE 2
6 Stem Brass CW 614N UNI EN 12164 NP 1
7 Stem Packing PTFE 1
7A Stem O-ring NBR 1
8 Handle Steel Fe DD11 UNI EN 10111 ZP 1
9 Handle Cover Vinyl 1
10 Thrust Washer PTFE 2
11 Gland Nut Steel, Class 4 ZP 1
11A Packing Gland Brass CW 614N UNI EN 12164 NP 1
13 Handle Nut Steel, Class 4 ZP 1
Standard Materials
Description Material Qty
Brass CW 617N UNI EN 12165
(Nickel-Chrome Plated)
1
Loading...