Figure 430
BRASS BODY BALL VALVES
2 PC FULL PORT WATER SERVICE VALVE
w/PRESS ENDS
The FNW gure 430 press valve for water
service is suggested for all applications
where labor and time savings is a
must. The gure 430 valve allows quick
installation on copper pipelines meeting
ASTM B88 standards. The structure of
the valve, made in dezincication resistant
brass, guarantees excellent corrosion
resistance particularly in the connection
areas of the pipeline. Drip Fit o-rings
ensure that an end connection will drip,
indicating an end was not pressed.
Features:
• 200 PSI Max. Working Pressure
• 250°F Max. Temperature at Max.
Pressure
• Full Port
• Press Ends
• Conforms to MSS SP-110
1
• FM, and UL Certied (up to 2”)
• True 2-Piece Design
• Drip Fit O-rings (up to 2”)
• No Soldered-In End Pieces
• Blow-out Proof Stem
• Adjustable Packing
• Secondary O-Ring Stem Seal
• Forged Brass Body & End Cap
• 100% DZR Brass offering great
protection against corrosion & cracking
• 100% Electronically Tested in Open and
Closed Position at 80 PSI
• Uses The Same Handle Accessories As
The Figure 420 Ball Valve
• Sizes 1/2” to 4”
2
• 2-1/2” to 4” Available in XL 3 or XLC 4
End Connections
1 The current specication SP-110-1996 does
not address the new technology of press end
connections. Other than this exception, the valve
meets the design criteria of the specication.
2 The FNW large body gure 430 press valves
(2-1/2” to 4”) are available in two distinct end
types, XL and XLC which are for installation using
crimp tools equipped with matching XL or XLC
jaw sets.
3 4” XL valves are for copper tube or copper ttings
only and should not be used on brass ttings or
adapters.
4 All XLC valves are for copper tube or copper XLC
ttings only and should not be used on brass
ttings or adapters.
NOT RECOMMENDED FOR BURIED
Up to 2”
Locking Handle Kits Stem
Drip Fit O-rings
The Drip Fit o-rings (up to 2”) ensure
that an unpressed end will drip. This
is an added safety feature to ensure
unpressed ends are discovered and
corrected.
Up to 2”
Extension Kits
Dimpled O-ring
2-1/2” to 4” End Options
XL XLC
Accessories
Tee Handle Kits
Oval Handle Kits
Memory
Stops
Stainless Steel
Figure Number Matrix
FNW 430 End Size
1/2 = D
3/4 = F
1 = G
SIZE CODE
1-1/4 = H
1-1/2 = J
2 = K
CONFIGURATION
1/2” to 2” = Blank
2-1/2” to 4” = XL =
2-1/2” to 4” = XLC
Kit Codes (Order Separately)
FNW 420 Kit Size
KIT TYPE
Locking Handle = LHK
Stem Extension = SE
Tee Handle = THK
Oval Handle = OHK
Memory Stop = MSK
Stainless Handle = SSHK
SIZE CODE
1/2” = BD
3/4”~1” = FG
1-1/4”~1-1/2” = HJ
2” = K
2-1/2”~3” = LM
4” = P
Handle
2-1/2 = L
3 = M
4 = P
www.fnw.com
Figure 430
BRASS BODY BALL VALVES
2 PC FULL PORT WATER SERVICE VALVE
w/PRESS ENDS
Standard Materials
Ref.
No.
1 Body Brass CW 602N UNI EN 12165 1
1A O-Ring EPDM (EP851) 2
2*
3 End Cap Brass CW 602N UNI EN 12165 1
4 Seat PTFE 2
6 Stem Brass CW 614N UNI EN 12164 1
7 Stem Packing PTFE 1
7A Stem O-ring NBR 1
8 Handle Steel Fe DD11 UNI EN 10111 1
9 Handle Cover Vinyl 1
10 Thrust Washer PTFE 1
11 Gland Nut Steel, Class 4 ZP 1
11A Packing Gland Brass CW 614N UNI EN 12164 1
12A Circlip S235JR UNI EN 10025 (XL only) 2
12B Backer Ring Steel, Zinc Plated (XL only) 2
12C Comp. Ring Steel, Zinc Plated (XLC only) 2
13 Handle Nut Steel, Class 4 ZP 1
* NOTE: Valve sizes 2-1/2” to 4” utilize a hollow ball
Description Material Qty
Ball (1/2”-2”)
Ball (2-1/2”-4”)
Brass CW 617N UNI EN 12165
(Nickel-Chrome Plated)
Brass CB 753-S UNI EN 1982
(Nickel-Chrome Plated)
1
Standard Size Dimensions (Inches)
Size E H ØJ ØP ØPFT C D Q L L1 L2
1/2 3.86 1.89 1.30 0.59 0.63 0.67 0.31 0.71 3.13 1.71 1.42
3/4 4.80 2.28 1.54 0.79 0.88 0.83 0.39 0.91 3.66 2.05 1.61
1 4.80 2.44 1.93 0.98 1.13 0.83 0.39 0.94 4.13 2.32 1.81
1-1/4 6.02 3.07 2.32 1.26 1.38 0.83 0.39 1.02 4.41 2.44 1.97
1-1/2 6.02 3.35 2.87 1.57 1.63 1.02 0.49 1.42 5.63 2.91 2.72
2 6.38 3.80 3.39 1.95 2.13 1.18 0.57 1.57 6.48 3.39 3.09
Extended Size Dimensions (Inches)
Size E H ØJ ØP ØPFT
2-1/2 8.07 5.08 4.37 2.40 2.50 1.54 1.08 2.17 8.33 4.43 3.90 3.15 1.65 7.30 3.94 3.39
3 8.07 5.51 5.35 2.87 3.00 1.54 1.08 2.17 9.07 4.82 4.25 3.66 1.91 8.60 4.63 4.00
4 10.24 6.30 6.54 3.82 4.00 1.54 1.08 2.56 10.63 5.51 5.12 4.69 2.42 10.36 5.30 4.98
DOC: FNW43008 Ver. 06/2016
© 2016 - FNW. All rights reserved.
The FNW logo is a trademark of Ferguson Enterprises, Inc., PL Sourcing, PO Box 2778,
Newport News, VA 23609
The contents of this publication are presented for information purposes only, and
while effort has been made to ensure their accuracy, they are not to be construed as
warranties or guarantees, expressed or implied, regarding the products or services
described herein or their use or applicability. All sales are governed by our terms and
conditions, which are available on request. We reserve the right to modify or improve
the designs or specications of our products at any time without notice. Always verify
that you have the most recent product specications or other documentation prior to the
installation of these products.
C D Q L L1 L2 ØB Q L L1 L2
XL Ends XLC Ends
Cv & Weights
Size 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4
Cv 18 34 49 102 265 306 624 1001 1606
0.49 0.86 1.23 2.34 3.48 4.61 - - -
Wt.
- - - - - - 10.87 15.56 24.54
(Lbs)
- - - - - - 9.04 14.55 22.99
Loading...