FNW 426A, 427A, 428A User Manual
Figure 426A, 427A, 428A
BRASS BODY BALL VALVES
2 PC FULL PORT 600 WOG
3/4” HOSE CONNECTION BALL VALVE
Features:
• 3/4” Hose Connection by:
○ Female Pipe Thread (Fig. 426A)
○ Sweat End (Fig. 427A)
○ Male Pipe Thread (Fig. 428A)
• 600 WOG*
• Full Port
• PTFE Seats
• Forged Brass Body & End Cap
• Meets MSS SP-110 Standards
• Blow-out Proof Stem
• Adjustable Packing
• Includes Cap, Cap Gasket, and Chain
• Maximum Cap Pressure is 50 PSI**
• Optional Lock Lever Kit
• Optional Stem Extension Kit
• Optional Tee Handle Kit
• Optional Oval Handle Kit
• Optional Memory Stop Kit
* The pressure/temperature ratings indicated are for the
valve body only. Hose side ratings are dependent on
the type of hose connected by others.
** The included cap is rated to 50 PSI maximum. The
primary purpose of the cap is for protection of the hose
connection threads. For safety concerns, removal
under pressure is not recommended.
NOT FOR USE AT OR BELOW GROUND LEVEL
Figure Number Matrix
FNW 4 2 End A Size
END CONNECTION
FNPT = 6
SWEAT = 7
MNPT = 8
SIZE CODE
1/2 = D
3/4 = F
Figure 426A - FNPT Figure 427A - SWEAT Figure 428A - MNPT
Accessories
Replacement Handles
Locking Handle Kits Stem Extension Kits Oval Handle Kits
Tee Handle Kits
Memory
Stops
Kit Codes (Order Separately)
FNW 410A Kit Size
KIT TYPE
Replacement Handle = BRYLWH
Locking Lever = LHK
Stem Extension = SE
Tee Handle = THK
Oval Handle = OHK
Memory Stop = MSK
SIZE CODE
1/2” = BD
3/4” = FG
www.fnw.com
Figure 426A, 427A, 428A
BRASS BODY BALL VALVES
2 PC FULL PORT 600 WOG
3/4” HOSE CONNECTION BALL VALVE
E
13
11
7
6
D
1 4 2 3 30 31 32
L
FIGURE 426A
Dimensions (inches) & Weights
Figure Size ØD E H L L1 L2 Wt. (Lbs)
426
427
428
DOC: FNW426A-8ABV11 Ver. 8/2012
© 2012 - FNW. All rights reserved.
The FNW logo is a trademark of Ferguson Enterprises, Inc., PL Sourcing, PO Box 2778, Newport News, VA 23609
The contents of this publication are presented for information purposes only, and while effort has been made to ensure their accuracy, they are not to be construed as
warranties or guarantees, expressed or implied, regarding the products or services described herein or their use or applicability. All sales are governed by our terms and
conditions, which are available on request. We reserve the right to modify or improve the designs or specications of our products at any time without notice. Always
verify that you have the most recent product specications or other documentation prior to the installation of these products.
1/2 0.50 2.95 1.50 2.83 0.50 0.44 0.52
3/4 0.75 3.94 1.85 3.15 0.76 0.44
1/2 0.50 2.95 1.50 2.72 0.50 0.44 0.52
3/4 0.75 3.94 1.85 3.27 0.76 0.44 0.92
1/2 0.50 2.95 1.50 2.87 0.50 0.44 0.52
3/4 0.75 3.94 1.85 3.27 0.76 0.44 0.92
0.92
9
8
33
34
L2
H
L1
L
FIGURE 427A
L
FIGURE 428A
Standard Materials
Ref. No. Description Material Qty
1 Body ASTM B124-C37700 Brass 1
2 Ball
3 End Cap ASTM B124-C37700 Brass 1
4 Seat PTFE 2
6 Stem ASTM B16-C36000 Brass 1
7 Stem Packing PTFE 1
8 Handle
9 Handle Sleeve Vinyl 1
11 Packing Gland ASTM B16-C36000 Brass 1
13 Handle Nut
30 Cap Nut ASTM B124-C37700 Brass 1
31 Cap Nut Seal NBR Rubber 1
32 Ring ASTM S30400 Stainless 2
33 Chain Brass (Plated) 1
34 Plate ASTM S43000 Stainless 2
ASTM B16-C36000 Brass
(Nickel-Chrome Plated)
ASTM A283-D Steel
(Zinc Plated)
AISI-1010 Steel
(Zinc Plated)
1
1
1
Loading...