Page 1
Figure 35S
FLEXIBLE CONNECTORS
SWEAT END METAL BRAIDED
FLEXIBLE CONNECTOR
Flexible connectors are used to absorb thermal and seismic movement,
absorb hydraulic shock, provide vibration and noise dampening, ease
installation and correct minor misalignment of piping and components.
They come in a variety of sizes, materials, and connection ends for
numerous applications.
The inner hose is an annular (bellows) design. An annular hose is better
suited for pump connections because it can better sustain torsion stress
due to longitudinal expansion from rises in pressure. Metal wire braid on a
hose assembly restrains against hose elongation under higher pressures
and acts to dampen vibration. A heavy braid also increases abrasion
resistance. Optimal braid coverage will contain the core under pressure
and reduce the possibility of twisting and squirming.
The use of braided metal connectors for applications such as pumps,
compressors and other mechanical equipment can enhance the overall
operation of a system.
Braided connectors have the advantages of:
• Longer service life
• Increased pressure capacity
• Greater fatigue resistance due to ex
• Increased temperature capacity of media
• Greater protection of annular hose
• Acceptance of thermal expansion
• Assembly must have 100% chloride free
ux and be thoroughly cleaned after each
installation
Pressure / Temperature
Pressure @ 70°F
Size
Working PSI Test PSI
3/4 375 562
1 390 585
1-1/4 340 510
1-1/2 320 480
2 320 480
* Multiply working pressure by pressure
factor for temperature adjusted
pressure rating.
Pressure Factors
for Above 70°F*
°F Factor
100 0.95
150 0.92
200 0.89
250 0.86
300 0.83
350 0.81
400 0.78
450 0.75
www.fnw.com
Part Numbers & Weight
Size Part Number
3/4 FNW35SF 0.50
1 FNW35SG 0.75
1-1/4 FNW35SH 1.00
1-1/2 FNW35SJ 1.25
2 FNW35SK 2.13
Approx. Wt
(Lbs)
Page 2
FLEXIBLE CONNECTORS
SWEAT END METAL BRAIDED
FLEXIBLE CONNECTOR
Dimensions (inches)
Size ØD ØE L1 L2 L3
3/4 0.88 0.868 7.0 2.93 1.250
1 1.13 1.288 8.0 3.68 1.375
1-1/4 1.38 1.368 8.5 4.18 1.375
1-1/2 1.63 1.618 9.0 4.23 1.500
2 2.13 2.116 10.5 5.43 1.750
Standard Materials
Ref.
No.
Description Material
1 Hose Braid Bronze
2 Corrugated Hose Bronze
3 Braid Band ASTM B88 Copper
4 Female Sweat End ASTM B88 Copper
Figure 35S
Axial Compression
Transverse Movement
Axial Elongation
Angular Deection
Braid Limits
Maximum
Size
3/4 0.12” 0.12” ±0.08” 2°
1 0.12” 0.12” ±0.08” 2°
1-1/4 0.12” 0.12” ±0.08” 1.5°
1-1/2 0.12” 0.12” ±0.08” 1.5°
2 0.16” 0.16” ±0.12” 1.5°
Axial
Compression
Maximum
Axial
Elongation
Maximum
Transverse
Movement
Maximum
Angular
Deection
DOC: FNW35S05 Ver. 6/2016
© 2016 - FNW. All rights reserved.
The FNW logo is a trademark of Ferguson Enterprises, Inc., PL Sourcing, PO Box 2778, Newport News, VA 23609
The contents of this publication are presented for information purposes only, and while effort has been made to ensure their accuracy, they are not to be construed as
warranties or guarantees, expressed or implied, regarding the products or services described herein or their use or applicability. All sales are governed by our terms and
conditions, which are available on request. We reserve the right to modify or improve the designs or specications of our products at any time without notice. Always
verify that you have the most recent product specications or other documentation prior to the installation of these products.
Loading...