FNW 220AM User Manual

Figure 220AM
1/4” ~ 1”
Pressure (PSIG)
STAINLESS STEEL BALL VALVES
2 PC FULL PORT 2000 CWP
w/ ISO MOUNTING PAD
Features:
• 2000 PSI CWP* Non-Shock
• 150 PSI WSP
• Blow-out Proof Stem
• Live Loaded Packing
• Anti-static Design
• Investment Cast Body
• TFM (Super TFE) Seats
• Threaded NPT Ends
• Direct Mounting Pad
• Vacuum rated to 26.967”Hg (75 Torr)**
• Vented Ball
• Manufactured Silicone Free
• Optional Locking Handle Kits (1/4”~3”)
Standards:
• Design: ASME B16.34, MSS SP-110
• NACE MRO103 AND MRO175 Approved
• End Connections: ASME B1.20.1
• Seat/Shell Test: MSS SP-110
• Mounting Pad: ISO 5211
* 1/4” to 1” - 2000 PSI CWP
1-1/4” to 3” - 1500 PSI CWP
** Vacuum measurements are often made in
inches of mercury below atmospheric pressure. The values calculated here assume standard atmospheric pressure of 29.92 inches of
2000
1800
1600
1-1/4” ~ 3”
1400
1200
1000
800
600
400
200
-20 0 100 200 300 400 500
150 WSP
Saturated Steam Curve
Temperature (°F)
Locking Handle Kits (1/4”~3”)
Figure Number Matrix
FNW 220AM Size
SIZE CODE
1/4 = B 3/8 = C 1/2 = D 3/4 = F 1 = G
1-1/4 = H 1-1/2 = J 2 = K 2-1/2 = L 3 = M
Accessories
Kit Codes (Order Separately)
FNW 220AM Kit Size
KIT TYPE
Locking Handle = LHK
SIZE CODE
1/4”~3/4” = BF 1”~1-1/4” = GH 1-1/2”~2” = JK 2-1/2” = L 3” = M
www.fnw.com
Figure 220AM
STAINLESS STEEL BALL VALVES
2 PC FULL PORT 2000 CWP
w/ ISO MOUNTING PAD
Standard Materials
Ref.
Description Material Qty
No.
1 Body
2 End Cap
3 Ball 316SS Stainless 1
4 Seat TFM1600+20%GF 2
5 Stem 316SS Stainless 1
Anti-Static
6
Device
7 Thrust Washer TFM4215 1
8 Body Gasket PTFE 1
9 O-Ring FKM 1
10 V-Ring Packing PTFE 1 Set
11 Bushing 50% SS + 50% PTFE 1
12 Gland 316SS Stainless 1
Belleville
13
Washer
ASTM A351 Gr. CF8M
Stainless
ASTM A351 Gr. CF8M
Stainless
316SS Stainless 2
301SS Stainless 2
1
1
14 Stem Nut ASTM A194-8 Stainless 1
15 Stop-Lock-Cap 304SS Stainless 1
Dimensions (inches)
SIZE Ød L H ØE1 ØE2 ØU1 ØU2 P A ISO 5211 K (UNF) B
1/4 0.42 2.44 1.70 1.42 1.65 0.24 0.24 0.35 0.35 F03/F04 7/16-20 1.06 3/8 0.50 2.44 1.70 1.42 1.65 0.24 0.24 0.35 0.35 F03/F04 7/16-20 1.06 1/2 0.59 2.95 1.70 1.42 1.65 0.24 0.24 0.35 0.35 F03/F04 7/16-20 1.06 3/4 0.79 3.15 2.00 1.42 1.97 0.24 0.28 0.35 0.35 F03/F05 7/16-20 1.26
1 0.98 3.54 2.28 1.65 1.97 0.24 0.28 0.43 0.43 F04/F05 9/16-18 1.61 1-1/4 1.26 4.33 2.48 1.65 1.97 0.24 0.28 0.43 0.43 F04/F05 9/16-18 1.97 1-1/2 1.50 4.72 2.91 1.97 2.76 0.28 0.35 0.55 0.55 F05/F07 3/4-16 2.20
2 1.97 5.51 3.27 1.97 2.76 0.28 0.35 0.55 0.55 F05/F07 3/4-16 2.76 2-1/2 2.50 7.28 4.03 2.76 4.02 0.33 0.41 0.67 0.67 F07/F10 7/8-14 3.54
3 2.99 8.07 4.36 2.76 4.02 0.33 0.41 0.67 0.67 F07/F10 7/8-14 4.02
DOC: FNW220AM11 Ver. 01/2018
© 2018 - FNW. All rights reserved. The FNW logo is a trademark of Ferguson Enterprises, Inc., PL Sourcing, PO Box 2778, Newport News, VA 23609
The contents of this publication are presented for information purposes only, and while effort has been made to ensure their accuracy, they are not to be construed as warranties or guarantees, expressed or implied, regarding the products or services described herein or their use or applicability. All sales are governed by our terms and
conditions, which are available on request. We reserve the right to modify or improve the designs or specications of our products at any time without notice. Always verify that you have the most recent product specications or other documentation prior to the installation of these products.
Cv, Torque & Weight
Size Cv Torque (in-lbs) Wt (lbs)
1/4 15 69 1.19 3/8 15 69 1.21 1/2 18 77 1.34 3/4 36 98 1.81
1 48 166 3.06 1-1/4 93 277 3.79 1-1/2 165 388 6.11
2 207 582 10.03 2-1/2 450 897 16.20
3 780 1546 29.98