Figure 220
STAINLESS STEEL BALL VALVES
2 PC FULL PORT 2000 WOG
Features:
• 2000 WOG*
• 150 WSP (with Carbon Filled Seats)
• Full Port
• Blow-out Proof Stem
• Adjustable Packing
• Investment Cast Body & End Caps
• Threaded NPT Ends
• Stainless Steel Handle with Vinyl Grip
• Locking Device
• Actuator Mounting Pad
• Optional Carbon Filled Seats
• Conforms to MSS SP-110
• Tested to API 598
2000
1800
1600
1400
1200
1000
Pressure (PSIG)
800
600
400
200
0
*1/4” to 1” – 2000 WOG
1-1/4” to 2” – 1500 WOG
2-1/2” to 3” – 1000 WOG
1/4" - 1'
1-1/4" - 2"
2-1/2" - 3"
50 100 150 200 250 300 350 400 450 500
RTFE Seat
Temperature (F)
Carbon Filled Seat
Cv & Weights
Size Cv Wt. (Lbs)
1/4 6 0.7
3/8 12 0.7
1/2 19 1.0
3/4 37 1.2
1 64 2.5
1-1/4 103 3.1
1-1/2 143 4.9
2 360 8.2
2-1/2 440 16.5
3 520 24.5
Figure Number Matrix
FNW 2 2 0 SEAT X
SEAT TYPE
BLANK = STANDARD RTFE
C = CARBON FILLED TFE
For other valve materials or
configurations, contact FNW Valve at
(503) 287-8383 for sales assistance.
1/4 = B 1-1/4 = H
3/8 = C 1-1/2 = J
1/2 = D 2 = K
3/4 = F 2-1/2 = L
Torque
Size Torque (in-lbs)
1/4 60
3/8 60
1/2 80
3/4 150
1 200
1-1/4 250
1-1/2 320
2 500
2-1/2 680
3 800
SIZE CODES
1=G 3=M
4120 N.E. Columbia Blvd. • Portland Oregon USA 97211
Phone: 503-287-8383 • Fax: 503-281-9677 • www.fnwvalve.com
STAINLESS STEEL BALL VALVES
2 PC FULL PORT 2000 WOG
Standard Materials
Ref. No. Description
1 Body ASTM A351 Gr. CF8M 1
2 Ball 316SS 1
3 End Cap ASTM A351 Gr. CF8M 1
4 Seat RTFE Carbon Filled TFE 2
5 Body Seal PTFE Carbon Filled TFE 1
6 Stem 316SS 1
7 Stem Packing PTFE Carbon Filled TFE 1 Set
8 Handle 304SS 1
9 Handle Cover Vinyl 1
10 Thrust Washer PTFE Carbon Filled TFE 1
11 Gland Nut 304SS 1
12 Handle Washer 304SS 1
13 Handle Nut 304SS 1
14 Locking Pad 304SS 1
Figure 220
Material
220 220C
Qty
Dimensions (Inches)
Size ØD E L H S M1 M2 M
1/4 0.39 3.74 2.17 2.52 0.196 0.50 1.12 10-24UNC
3/8 0.47 3.74 2.17 2.52 0.196 0.50 1.12 10-24UNC
1/2 0.62 4.92 2.55 2.52 0.255 0.50 1.12 10-24UNC
3/4 0.78 4.92 3.03 2.64 0.255 0.88 1.38 10-24UNC
1 0.98 5.51 3.46 3.27 0.314 0.88 1.38 10-24UNC
1-1/4 1.25 5.51 4.01 3.50 0.314 1.00 1.50 1/4 -20UNC
1-1/2 1.57 7.87 4.33 3.93 0.393 1.00 1.50 1/4 -20UNC
2 1.96 7.87 4.92 4.25 0.393 1.00 1.50 1/4 -20UNC
2-1/2 2.55 9.84 6.45 5.91 0.472 1.18 2.76 1/4 -20UNC
3 3.14 9.84 7.12 6.34 0.472 1.18 2.76 1/4 -20UNC
DOC: FNWBV22005 Ver. 7/05
© 2005 - FNW. All rights reserved.
The FNW logo is a registered trademark of Ferguson Enterprises, Inc.
The contents of this publication are presented for information purposes only, and while effort has been made to insure their accuracy, they are not to be construed as warranties
or guarantees, expressed or implied, regarding the products or services described herein or their use or applicability. All sales are governed by our terms and conditions, which
are available on request. We reserve the right to modify or improve the designs or specifications of our products at any time without notice.
Loading...