FNW 200A User Manual
Figure 200A
STAINLESS STEEL BALL VALVES
2 PC FULL PORT 1000 CWP
Features:
• 1000 PSI CWP Non-Shock
• 150 PSI WSP
• Full Port
• Blow-out Proof Stem
• Adjustable Packing
• Investment Cast Body
• Threaded NPT Ends
• Stainless Steel Handle
• Locking Lever
• RTFE Seats
• Vented Ball
• Stocked Congurations:
○ Standard Locking Lever (1/4”~2”)
○ Oval Handle (1/4”~2”)
• Manufactured Silicone Free
• Replacement Locking Handle Kits Available
• Optional Stem Extension Kit (Uses Existing
Valve Handle)(1/4”~2”)
• Optional Oval Handle Kit (1/4”~2”)
Accessories
Additional Stocked Congurations
Standards:
• Design: ASME B16.34,
MSS SP-110
NACE MRO103 and MRO175 Approved
• End Connections: ASME B1.20.1
• Seat/Shell Test: MSS SP-110
Figure Number Matrix
FNW 200A Handle Size
HANDLE CODE
Standard Handle = Blank
Oval Handle = OL
SIZE CODE
1/4 = B
3/8 = C
1/2 = D
3/4 = F
1 = G
1-1/4 = H
1-1/2 = J
2 = K
Kit Codes (Order Separately)
FNW 310A Kit Size
KIT TYPE
Locking Handle = LHK
Stem Extension = SEK
Oval Handle = OH
Note: The gure 200A uses the same accessories
as the 310A.
SIZE CODE
1/4”~1/2” = BD
3/4” = F
1”~1-1/4” = GH
1-1/2”~2” = JK
Replacement Locking
Handle Kits (1/4”~2”)
Stem Extension Kits (1/4”~2”) Oval Handle Kits (1/4”~2”)
1000
800
600
400
Pressure (PSIG)
200
-20 0 100 200 300 400
150 WSP
Saturated Steam Curve
Temperature (°F)
Oval Handle (1/4”~2”)
Cv, Torque & Weight
Size Cv
1/4 15 60 0.73
3/8 15 60 0.68
1/2 18 66 0.75
3/4 36 80 1.14
1 48 146 1.94
1-1/4 93 252 2.82
1-1/2 165 344 4.12
2 207 503 6.48
Torque
(in-lbs)
Wt (lbs)
www.fnw.com
STAINLESS STEEL BALL VALVES
2 PC FULL PORT 1000 CWP
Figure 200A
Dimensions (inches)
Straight
Size Ød L H1 H2
1/4 0.42 2.28 1.13 0.43 2.28 3.94 2.50 3.97 5/16-18 0.197 0.93
3/8 0.47 2.28 1.13 0.43 2.28 3.94 2.50 3.97 5/16-18 0.197 0.93
1/2 0.59 2.44 1.05 0.38 2.28 3.94 2.50 3.97 5/16-18 0.197 0.98
3/4 0.79 2.85 1.35 0.49 2.52 5.08 2.96 5.20 3/8-16 0.256 1.26
1 0.98 3.35 1.51 0.62 3.03 6.14 3.03 5.20 7/16-14 0.314 1.61
1-1/4 1.26 3.70 1.46 0.55 3.27 6.14 3.22 5.20 7/16-14 0.314 1.97
1-1/2 1.50 4.13 1.96 0.89 3.78 7.19 3.80 5.63 5/8-11 0.394 2.20
2 1.97 4.92 1.91 0.89 4.02 7.19 4.02 5.63 5/8-11 0.394 2.76
DOC: FNW200A11 Ver. 01/2018
© 2018 - FNW. All rights reserved.
The FNW logo is a trademark of Ferguson Enterprises, Inc., PL Sourcing, PO Box 2778, Newport News, VA 23609
The contents of this publication are presented for information purposes only, and while effort has been made to ensure their accuracy, they are not to be construed as
warranties or guarantees, expressed or implied, regarding the products or services described herein or their use or applicability. All sales are governed by our terms and
conditions, which are available on request. We reserve the right to modify or improve the designs or specications of our products at any time without notice. Always
verify that you have the most recent product specications or other documentation prior to the installation of these products.
Lever
H W H W
Oval
Handle
K
(UNC)
S B
Ref.
No.
1 Body ASTM A351 Gr. CF8M Stainless 1
2 End Cap ASTM A351 Gr. CF8M Stainless 1
3 Ball 316SS Stainless 1
4 Seat RTFE 2
5 Stem 316SS Stainless 1
6 Thrust Washer PTFE 1
7 V-Ring Packing PTFE 1 Set
8 Gland Nut 304SS Stainless 1
9 Stem Washer 304SS Stainless 1
10 Stem Nut ASTM A194-8 Stainless 1
Handle 304SS Stainless 1
11
1”~2” Oval Handle 304SS+CF8 1
12 Handle Sleeve Vinyl Plastic 1
13 Locking Device 304SS Stainless 1
14 Body Gasket PTFE 1
Standard Materials
Description Material Qty
Loading...