POS1000 & BOOK1000
with B74 M/B
Installation Guide
Point-of-Sale
Hardware System
482000A1
August 2002 V1.1
1
1000 series include POS1000 and BOOK1000. POS1000 has a front bezel cover and a
lock, while BOOK1000 does not.
1. Accessory
Warranty Card Power Cable
Drivers Bank
The following drivers in the folders of Driver Bank are necessary for driver installation.
Folder Driver Function
Acrobat Acrobat Reader Installation
BIOS Tool BIOS Update Tool
Common
CDROMDrv CDROM driver installation (for DOS)
Elo_Touch Touch screen driver Installation
LAN_drive LAN driver installation
Netmos
＊
Enable COM5/COM6
Smart Card Smart Card driver installation
AC97_codec_ADI Audio driver installation
B74
Intel845G/GL_Chipset Chipset initial installation
Intel845G/GL-VGA VGA driver installation
USB20 USB driver installation
Card Reader Card Reader Test Program
Test Utility
Cash Drawer Cash Drawer Test Program
VFD Customer Display Test Program
2
678
4
2.I/O Function
2.1 Front View
1
2.2. Rear View
2
3
5
# Function # Function # Function
1 Power/HDD Indicator 8 Audio( In/Out/MIC) 15 Cash Drawer(POS)
2 CD-ROM Drive
3 Floppy Disc Drive 10 PS/2 Mouse 17 LAN
4 Power Button 11 VGA 18 COM3(POS)
5 USB3/USB4(POS) 12 LPT 19 2nd LPT(Optional)
6 Compact Flash(POS) 13 24V(POS) 20 COM4(POS)
7 USB1/USB2 14 COM2
9 11
9 PS/2 Keyboard 16 COM1
12
19 20
13 15 14 10 16 17
18
Before plug-in power cord & power on, please make sure your regional power system
110V or 220V, and set up right dip switch.
3
3. Specification
Item Function
Motherboard B74
Core Logic 845GL supports 400MHz FSB
CPU Processor Intel P4 processor mP478-Pin
Memory 2 x DIMM DDR 200/266 Socket up to 2GB
BIOS AWARD PnP 2Mbit
VGA Display Built-in Core Logic
VGA memory Share Memory
I/O Controller W83627HF x 1, W83697 x1
I/O Port Rear
2x Serial (COM1/COM2 pin1/pin9 supports 5V/ 12V) Selectable
1x Parallel(DB25)
2x USB support USB 2.0
1x PS2 Keyboard
1x PS2 Mouse
1x Audio(MIC, Line-in, Line-out )
1x LAN
Front (POS)
2x USB support USB 2.0
1x Compact Flash socket
Ethernet Controller RTL 8100B 10/100Mb Fast Ethernet controller
Slot on board 1x 120pin PCI slot support three PCI signal for 2xPCI / LAN
Audio Controller Built-in Core Logic, supports AC97 2.1 w/CODEC
Expansion Slot 2x PCI option 1xPCI, 1xPCI/ISA Riser card w/DOC socket
Storage Device
1x3.5” FDD
Option 1x3.5” HDD
Option 1x 5.25” Slim CD-ROM,CD-RW, DVD ROM
Wake on Support WOL(Wake on LAN) & WOR(Wake on Ring)
I/O Board (POS) COM3/COM4 pin1/9 s upport +5V/+12V selectable, Cash
Drawer, 24V DC
2nd Parallel Port
Optional
Bracket
Power Supply FT-8016B 160W ATX
Operation Temperature 5°– 40°C
EMI/EMS FCC/CE Class A
Dimension 300(W) x 320(D) x 90(H) mm
4
4. Jumper Setting
4.1 Location of Main Board
5
4.1.1 COM 1 Power Selection Default Setting:*
Pin Function JP1
*DCDA# 1-2
1
VCC 3-4
+12V 5-6
*RIA# 7-8
9
VCC 9-10
+12V 11-12
4.1.2 COM 2 Power Selection
Pin Function JP2
*DCDB# 1-2
1
VCC 3-4
+12V 5-6
*RIB# 7-8
9
VCC 9-10
+12V 11-12
4.1.3 AC97 Audio Enable/Disable
Function JP3
*Enable OFF
Disable ON
4.1.4 CMOS Operation mode
Function JP4
*CMOS Normal OFF
CMOS Reset ON
4.1.5 Power Mode
Function JP5
*ATX Power 1-2
AT Power 7-8
4.1.6 Compact Flash Master/Slave Setting
Function JP8
*Master OFF
Slave ON
4.1.7 CPU Clock setting
Function JP9
*Auto 1-2
100MHZ 2-3
3-4
5-6
6
4.2 Location of I/O Board
Cash
Drawer
COM3 COM4 24V
PWR1
CN1
4.2.1 COM3 Power Selection
Pin Function JP1
1
9
4.2.2 COM4 Power Selection
Pin Function JP2
1
9
*DCDC# 1-2
VCC 3-4
+12V 5-6
*RIC# 7-8
VCC 9-10
+12V 11-12
*DCDD# 1-2
VCC 3-4
+12V 5-6
*RID# 7-8
VCC 9-10
+12V 11-12
4.2.3 Cash Drawer
Function JP3
*12V 1-2
24V 2-3
4.2.4 Cash Drawer Port Pin Assignment
Pin Signal Pin Signal
1 GND 4 12V/24V
2 200H-Bit0 5 200H-Bit1
3 201H-Bit0 6 GND
Data out address(200h) Data in address(201h)
7
4.3 Optional 2nd Printer Port (Bracket)
4.3.1 Printer Port Pin Assignment
# Signal # Signal # Signal # Signal # Signal
1 STROBE- 6 DATA BIT4 11 BUSY 16 INIT- 21 GND
2 DATA BIT0 7 DATA BIT5 12 PAPER EMP 17 SLCT IN- 22 GND
3 DATA BIT1 8 DATA BIT6 13 SLCT 18 GND 23 GND
4 DATA BIT2 9 DATA BIT7 14 AUTO FEED- 19 GND 24 GND
5 DATA BIT3 10 ACK- 15 ERROR- 20 GND 25 GND
4.4 Daughter Board(POS1000)
4.4.1 Compact Flash Master/Slave Setting
J6 JP1
J5
USB3
J4
USB4
Function JP1
Master OFF
Slave On
J1
Compact Flash
J8
8
Loading...