WASP-N
User Manual
1
2
3
4
5
6
7
LB Button
1
Joystick
2
B Button
3
A Button
4
Logo Button
5
LT Button
6
Lock
7
Package Contents: Gamepad, Mapping Ruler, USB Cable,
Wasp Lighting Extension, Right Angle Gasket, Must Read For
Player
Right Angle Gasket: Compatible with 4.7-inch iPhone.
Setting the right angle gasket into your Wasp offers you a
better field of view.
进入游戏自定义面板 ， 将开镜开枪等任意
可挪动图标拖动到四个固定映射点后即可
开始畅玩
Mapping Ruler:
Help to adjust virtual button position before gaming.
Using Wasp
Pull down the switch on the back of the gamepad.
The yellow handle will pop up.
Turn on Wasp by sliding the switch to the left.
The light will become orange.
2.
1.
4.
Keep
the screen
blank
3.
Turn off
portrait orientation lock
Turn off the portrait orientation lock on your iPhone.
Lock your screen (make sure your screen comes blank)
and plug your iPhone into Wasp as shown.
Press the yellow handle until your iPhone is secured.
Unlock your iPhone.
5.
6.
Wasp-N version supports iPhone 6 - 8 and iPhone 6 P‒ 8 P.
Make sure your screen is blank before plug your iPhone
into WASP, otherwise you need to repeat steps 4 to 6.
Wasp will enter sleep mode if no further action is taken
within 10 minutes. Press Logo button once to turn on
Wasp again.
-
-
-
16:32
Thursday,March 15
Playing Games
With Wasp, you can directly control the game which is
downloaded from App Store. The intersection of X and Y axis
is the fixed projection point as shown below. Every button of
Wasp has its own point. Drag an icon (e.g. shooting, aiming) in
the game to any point, then you have established the
connection with button and icon. The mapping ruler can help
you locate more precisely.
Take Fortnite as an example. Go to ‘HUD Layout tool’ in game.
Drag the virtual button to the corresponding mapping
location mentioned above. The button of gamepad is now
mapped to the virtual button.
1. Only the Left Trigger supports long pressing. Any virtual button that
needs long pressing should be set to where Left Trigger is.
2. All mobile FPS games (such as Fortnite & PUBG Mobile) support
customization of buttons. For games that do not support customization of
buttons, joystick control can be used.
Wasp Lighting Extension
Flydigi Wasp Lightning Extension is special extension
cable for iPhone. It allows you to use a headphone or
charge your iPhone while using Wasp
1. Plug iPhone lightning cable into Wasp Lightning Extension
2. Plug Wasp Lightning Extension into your iPhone
3. Install your iPhone into Wasp
4. Plug the lightning cable into portable power bank.
Please follow the instructions step by step in order to have
you iPhone charged correctly.
While using a headphone, please plug your headphone into
Wasp Lighting Extension first.
5V power supply
1.
2.
Basic Operation and
Indicator Light Description
Turn On/Off
Slide the power
button to the left
Slide the power
button to the right
Green light blinks
twice
After Wasp is
turned on
Light becomes
orange
Operation
Press Logo button
once
Light becomes
orange
Activate Wasp
During charging
Charging is
completed
Light becomes red
Red light turns off
Charging
When battery is
below 20%
When battery is
below 10%
Green light blinks
slowly
Green light blinks
fast
Low Battery
Status
Switch
Joystick
Mode
Press Logo button
for 3 seconds
Orange light blinks
once, joystick
enters FPS mode
Model No： Wasp-N
Compatibility： iPhone 6-8 & 6-8Plus
Connection： CapAir Mapping; Bluetooth 4.0
Dimensions： 110*81*19 mm
Weight： 100g
Battery Capacity： 300mAh
Charging Info： 5V/100mA
Charging Time： 2 hours
Standing Time： 15 hours
Operating Current： <20mA
Operating Environment： 0 °C - 40 °C
Orange light blinks
twice, joystick
enters MOBA mode
Press Logo button
and LB button for
3 seconds
Green light blinks
twice slowly
Adjust
Joystick
FAQ
Wasp stops working with your iPhone in it
Ensure the top handle is fastened and capacitive bar
covers your phone screen. We suggest to use a
thinner phone case or take the phone out of the case
while using Wasp.
1
Buttons fail to work while gaming
Turn off the screen before putting the phone into
Wasp. This could help to avoid inaccurate
capacitive sensing or interference during gaming.
2
Buttons fail to work while charging the
phone
Using a portable power bank for charging is
suggested to solve capacitive interference.
3
Earphones fail to work while using the Wasp
Cable
Connect earphones with Wasp Cable first, then
plug Wasp Cable into the phone.
4
Upgrade Wasp
Wasp is now operating with the latest firmware
version. We will keep you informed regarding
newer versions when ready. Please visit
www.flydigi.com to download upgrade tool.
5
More Information
We hope this user manual answered any questions you
may have had,If you have any further questions, please
contact us:
Facebook
Twitter
For more support
https://www.facebook.com/Flydigi
https://twitter.com/myFlydigi
http://www.flydigi.com
Loading...