Flyability 2, 3 Original Instructions Manual

FLYABILITY
RANGE
EXTENDER
INSTRUCTIONS
VERSION 1.0
06/14/2018
FLYABILITY SA +41 21 311 55 00 — INFO@FLYABILITY.COM EPFL INNOVATION PARK BLDG C | 1015 LAUSANNE | SWITZERLAND
Safety
EN 60950-1 – REx Config 1 (Model No.3)
Information technology equipment. Safety. General requirements. Risk assessment per EN ISO 12100:2010 – Safety of machinery. General principles for design. Risk assessment and risk reduction.
EMC
EN 300 328 V2.1.1 – REx Config 2 (Model No.2) EN 300 3 28 V2.1.1 – REx Config 1 (Model No.3)
Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband transmission systems; Data transmission equipment operating in the 2,4 GHz ISM band and using wide band modulation techniques; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive.
EN 301 489-1 V1.9.2 EN 301 489-3 V1.6.1 EN 301 489-17 V2.2.1
Radio
EN 300 440 V2.1.1 – REx Config 2 (Model No.2) EN 300 440 V2.1.1 – REx Config 1 (Model No.3)
Short Range Devices (SRD); Radio equipment to be used in the 1 GHz to 40 GHz frequency range; Harmonised Standard covering the essential requirements of article
3.2 of Directive 2014/53/EU.
EN 303 413 V1.1.1 – Rex Config 1 (Model No.3)
Satellite Earth Stations and Systems (SES); Global Navigation Satellite System (GNSS) receivers; Radi o eq uipme nt op erating in the 1 164 MHz to 1 300 M Hz and 1 559 MHz to 1 610 MHz frequency bands; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU.
EN 300 440-1 V1.6.17 EN 300 440-2 V1.4.1
Health
EN 50663: 2017 – REx Config 2 (Model No.2) EN 50663: 2017 – REx Config 1 (Model No.3)
Generic standard for assessm ent of low power electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (10 MHz - 300 GHz).
EN62479: 2010 – REx Config 2 (Model No.2) EN62479: 2010 – REx Config 1 (Model No.3)
Assessment of the compliance of low power electronic and electrical equipment with the basic restrictions related to human exposure to electromagnetic fields (10 MHz to 300 GHz).
EN 62471 EN 62311:2008 (RF Exposure)
EU DECLARATION OF CONFORMITY
We,
Flyability SA EPFL INNOVATION PARK BLDG C, 1015 Lausanne, Switzerland Tel: +41 21 311 55 00
declare under our sole responsibility that the product:
Range Extender (REx) Model No. 2 Serial Number 1000000-2000000
Range Extender (REx) Remote Control Model No. 3 Serial Number 1000000-2000000
to which this declaration relates is in conformity with the following standards or other normative documents:
ORIGINAL INSTRUCTIONSORIGINAL INSTRUCTIONS Page 3 of 24
Strictly confidential
following the provisions of
- Machinery Directive (MD) 2006/42/EC, and
- Radio Equipment Directive (RED) 2014/53/EU
The Technical Construction File is maintained at:
Flyability SA Avenue de Sévelin 20, 1004 Lausanne, Switzerland
The authorized representative located within the Community is:
Dr Adrien Briod Chief Technology Officer Avenue de Sévelin 20, 1004 Lausanne, Switzerland
Date: May 28th, 2018
ORIGINAL INSTRUCTIONSORIGINAL INSTRUCTIONS Page 4 of 24
Strictly confidential
FCC COMPLIANCE NOTICE
This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
This device may not cause harmful interference, and
This device must accept any interference received, including interference that may ca use un-
desired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by t urning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the re-
ceiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC RF EXPOSURE INFORMATION
Range Extender (REx)
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 20cm during normal operation.
FCC RF EXPOSURE INFORMATION
Range Extender (REx) Remote Control
SAR tests are conducted using standard operating positions accepted by the FCC/ISEDC with the device transmitting at its highest certified power level in all tested frequency bands, although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value. Before a new model is available for sale to the public, it must be tested and certified to the FCC/ISDEC that is does not exceed the exposure limit established by the FCC/ISDEC. Tests for each product are performed in positions and locations as required by the FCC/ISEDC.
For limb worn operation, this device has been tested and meets the FCC/ISEDC RF exposure guidelines when used with an accessory that contains no metal. For body worn operation, this device has been tested and meets the FCC/ISEDC RF exposure guidelines when used with an accessory designated for this product or when used with an accessory that contains no metal and that positions the device a minimum of 10 mm from the body. Non-compliance with the above restrictions may result in violation of RF exposure guidelines.
ORIGINAL INSTRUCTIONSORIGINAL INSTRUCTIONS Page 5 of 24
Strictly confidential
ISEDC RSS WARNING
This device complies with ISEDC licence-exempt RSS standard (s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
ORIGINAL INSTRUCTIONSORIGINAL INSTRUCTIONS Page 6 of 24
Strictly confidential
DISCLAIMER
Terms with initial capital letters shall have the following meanings: “Agreement” means the conditions of use of this Original Instructions and any other agreement
between You and Flyability per which the Product has been delivered to You, in­cluding but not limited to Flyability’s General Terms and Conditions.
“Flyability” means Flyability SA, a company incorporated in the Canton of Vaud in Switzer-
land under federal number CH-550.1.156.670-6 (IDE CHE-348.376.646) having its
registered offices at EPFL Innovation Park BLDG C, 1015 Lausanne, Switzerland “Product” means all goods and services described in this document. “You” means the person or legal entity to which the Product is delivered or who is oper-
ating the aircraft
All rights related to this document and all information it contained are the property of Flyability. REPRODUCTION, USE OR DISCLOSURE TO THIRD PARTIES WITHOUT PRIOR WRITTEN PERMISSION FROM FLYABILITY IS STRICTLY PROHIBITED.
By using the Products, software and syste ms of Flyability, You fully accept and consent, withou t reserve, Flyability’s warranty and liability terms stated below and all other terms and conditions agreed between You an d Flyability.
1. Product limited warranty
By using the Product, You hereby signify that you have read, fully understood and agreed this dis­claimer and the original instructions, and You agree that the Product:
(i) May be unfitted to Your needs and purposes; and (ii) Should not be used under influence of alcohol, drugs or any substances that may impair
cognitive abilities; and
(iii) Is subject to local regulations that could prevent its use.
You shall pursue available remedies to You according to the Agreement. The warranty shall exclude defects due to misuse, non-observation of the Original Instructions, moisture or liquids, explosive gas, proximity or exposure to heat at temperatures exceeding the Operating temperature, exces­sive strain, abuse, neglect, misapplication, repairs or modifications made by anyone other than Fly­ability or certified by Flyability. There are no express or implied warranties, representations or con­ditions other than those stated in this limited warranty and the Agreement. The remedy set forth herein and in the Agreement shall be the sole, exclusive remedy with respect to the Product.
2. Product liability
IN NO EVENT OR UNDER ANY CIRCUMSTANCE, UNLESS EXPRESSLY STATED IN THE AGREEMENT, SHALL FLYABILITY SA, ITS DIRECTORS, OFFICERS OR EMPLOYEES BE LIABLE TO YOU OR TO ANY THIRD PERSON CLAIMING RIGHTS DERIVED FR OM YOUR RIGH TS, IN CONTRACT, TORT OR OTHERWISE, FOR INDIRECT, SPECIAL, INCIDENTAL, EXEMPLARY, PUNITIVE OR CONSEQUENTIAL DAMAGES OF ANY KIND WHATSOEVER EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES INCLUDING, BUT NOT LIMITED TO, ANY DAMAGES CAUSED BY YOU OR A THIRD PARTY WHILE OPERATING OR USING THE PRODUCT, ANY DAMAGES CAUSED BY FAILURE OF THE ELECTRONICS OR SOFTWARE, ANY LOSS OF REVENUE, LOSS OF PROFIT, OR LOSS OF DATA WHETHER BASED UPON ANY ALLEGED BREACH OF WARRANTY, REPRESENTATION OR CONDITION, CONTRACT, OR ANY OTHER CONDUCT INCLUDING NEGLIGENCE (INTENTIONAL OR OTHERWISE), GIVING RISE TO SUCH CLAIM. A Party who relies on a breach of the other Party’s
ORIGINAL INSTRUCTIONSORIGINAL INSTRUCTIONS Page 7 of 24
Strictly confidential
obligations under this Agreement, shall take any and all reasonable measures in the circumstances to mitigate the consequences, including loss of profit, resulting from the breach. If it fails to take such measures, the Party in breach may claim a reduction in the damages in the amount by which the consequences should have been mitigated.
YOU SHALL NOT OPERATE THE PRODUCT IN AREAS OR UNDER CIRCUMSTANCES WHERE A FAILURE COULD CAUSE DAMAGES AND /OR HARM TO OBJECTS AND/OR PEOPLE. YOU SHOULD HAVE READ AND UNDERSTOOD THE ORIGINAL INSTRUCTIONS COMPLETELY BEFORE OPERATING THE PRODUCT. ANY DAMAGE AND/OR HARM ARISING FROM NOT ACCURATELY FOLLOWING THE PROCESSES AND GUIDANCE FROM THE ORIGINAL INSTRUCTIONS SHALL B E THE SOLE R ESPONSIBILITY OF THE OPERATOR OF THE PRODUCT.
ALL USE OF THE PRODUCTS IS UNDER YOUR SOLE RESPONSIBILITY, INCLUDING BUT NOT LIMITED TO, THE COMPLIANCE WITH APPLICABLE LAW AND REGULATIONS OF THE COUNTRY IN WHICH THE PRODUCT IS OPERATED.
Authorizations and regulations
SOME COUNTRIES MAY HAVE LAWS THAT LIMIT OR PROHIBIT THE USE OF RADIO FREQUENCY EQUIPMENT. YOU AR E SOLE RESPONSIBLE FOR SECURING ALL AUTHORIZATIONS, CERTIFICATIONS AND LICENSES REQUIRED FOR THE USE OF THE PRODUCT. FLYABILITY SA DOES NOT PROVIDE ANY LEGAL ADVICE OR COUNSELING AND UNDER NO EVENT SHALL BE LIABLE FOR ANY INFRINGEMENT OF ANY APPLICABLE LAW BY YOU.
ORIGINAL INSTRUCTIONSORIGINAL INSTRUCTIONS Page 8 of 24
Strictly confidential
ELIOS
Getting Started
Contents
Getting Started ...................................................................................................................................................................................................... 10
What’s In This Document................................................................................................................................................................................. 10
Before First Use........................................................................................................................................................................................................ 10
Product Description .............................................................................................................................................................................................. 11
Power Module Overview ................................................................................................................................................................................... 12
Antenna Module Overview ............................................................................................................................................................................. 13
Safety Notices ......................................................................................................................................................................................................... 14
General Guidelines ................................................................................................................................................................................................ 14
Environmental Awareness .............................................................................................................................................................................. 15
Use .................................................................................................................................................................................................................................... 16
Configuration With Standard Antennas ............................................................................................................................................... 16
Configuration With Range Extender ....................................................................................................................................................... 17
Checklist........................................................................................................................................................................................................................ 18
Trouble Shooting .................................................................................................................................................................................................... 19
Maintenance ............................................................................................................................................................................................................. 21
Inspection .................................................................................................................................................................................................................... 21
Cleaning ........................................................................................................................................................................................................................ 21
Component Replacement .............................................................................................................................................................................. 21
Help & Support ......................................................................................................................................................................................................... 21
Technical Specifications ................................................................................................................................................................................. 22
General .......................................................................................................................................................................................................................... 22
Power Module ......................................................................................................................................................................................................... 22
Antenna Module .................................................................................................................................................................................................... 22
Cables ............................................................................................................................................................................................................................ 22
Remote Controller ................................................................................................................................................................................................ 23
ORIGINAL INSTRUCTIONSORIGINAL INSTRUCTIONS Page 9 of 24
Strictly confidential
ELIOS
Getting Started
Getting Started
WHATS IN THIS DOCUMENT
This manual gets you started with setting up, packing up and maintaining your Range Extender. The following sections ensure that you use the Range Extender optimally. As s oon as setup is complete, you are ready to start using the Range Extender with your Flyability aircraft.
An electronic version of this manual can be found online at https://my.flyability.com.
BEFORE FIRST USE
Please read the user manual carefully before first use, ensuring particular attention is paid to the Dis­claimer and Safety guidelines. We also recommend that you check all tutorial videos and articles on the official Flyability website.
ORIGINAL INSTRUCTIONSORIGINAL INSTRUCTIONS Page 10 of 24
Strictly confidential
ELIOS
Getting Started
1. Configurable RC
2. Removable Antennas
6. Antenna Module
4. Power Module
5. Module Cable
PRODUCT DESCRIPTION
The Range Extender is composed of 6 different elements:
Configurable RC (Remote Control)
1. lowing either standard antennas or the Range Extender to be used. Both configurations allow a stable connection with the aircraft built by Flyability.
Removable Antennas
2. urable RC if the Range Extender is not needed.
RC Cable
3.
Power Module
4. as to the battery’s state of charge.
Module Cable
5. quality cable interfaces the Power and the Antenna Modules.
Antenna Module
6. cuitry. Housing features highly reflective stickers to increase the device’s visibility in low light conditions.
– 2m in length interfacing the Configurable RC and Power Module.
– The Removable Antennas can be connected directly to the Config-
– Houses the Range Extender battery and gives an audio/visual indication
– 20m in length, with marks every meter and red marks every 5m. This high
– Module contains the two system antennas and signal amplification cir-
– A configurable version of Flyability’s standard RC, al-
ORIGINAL INSTRUCTIONSORIGINAL INSTRUCTIONS Page 11 of 24
Strictly confidential
ELIOS
Getting Started
Reflective sticker
(LEDs)
(Green, Orange, Red)
Anchor point
Quick Start guidelines
Power socket
Battery strap
Battery slot
POWER MODULE OVERVIEW
System statu s
Battery level indicators
ORIGINAL INSTRUCTIONSORIGINAL INSTRUCTIONS Page 12 of 24
Strictly confidential
ELIOS
Getting Started
Tripod mount
Reflective covering
access panel
ANTENNA MODULE OVERVIEW
Cable connector
ORIGINAL INSTRUCTIONSORIGINAL INSTRUCTIONS Page 13 of 24
Strictly confidential
ELIOS
Safety Notices
Safety Notices
GENERAL GUIDELINES
The operator should always act according to his or her best judgment, focusing on the safety of
the people and the environment he/she is operating in.
Operating the Configurable RC can be stressing, tiring and can cause muscular fatigue. The
Configurable RC is therefore equipped with a loop on which to attach a neck strap, use this to relieve your muscles.
The Power Module is equipped with an anchoring clip, this can be attached to objects in the
environment to prevent the system being lost when deployed into voids.
DO NOT use the Range Extender under influence of alcohol, drugs or any other substances that
may impair cognitive abilities.
A risk assessment MUST be performed before deploying the Range Ext ender. Use only provided Flyability parts, genuine Flyability parts, or parts certified by Flyability. Using
other devices or parts combination with the Range Extender (e.g. batteries, antennas, etc.) or performing unauthorized modifications may result in system malfunctioning and/or compro­mise safety.
It is recommended to use only transport cases approved by Flyability. DO NOT over torque the connectors when plugging in the Removable Antennas or the RC ca-
bles.
ONLY use the antennas provided by Flyability or an approved reseller.
The Configurable RC MUST be turned on ONLY AFTER connecting the Removable Antennas or
the cables. The Configurable RC MUST be turned off PRIOR TO disconnecting the Removable Antennas or the RC Cables. Not following this recommendation could severally damage the RC. Flyability is not responsible for any damages to the Configurable RC caused through improper use.
DO NOT use any other battery other than those supplied by Flyability. Use of other batteries may
damage the product and/or affect its performance.
DO NOT bend the RC Cable though a radius smaller than 1cm and the Module Cable through a
radius smaller than 7cm. Not respecting this can reduce the cables electrical performance and longevity.
After use, protective caps should be placed back on both the Configurable RC and RC Cable’s
connectors
Read carefully the Battery Safety Guidelines before using the system.
ORIGINAL INSTRUCTIONSORIGINAL INSTRUCTIONS Page 14 of 24
Strictly confidential
ELIOS
Safety Notices
ENVIRONMENTAL AWARENESS
Always use the Range extender within the listed conditions. Doing so will reduce incidents and dam­age to the product.
The Range Extender is not waterproof. Do not use it in heavy rain/snow or in humid environ-
ments. Moisture can seriously damage the electronics of the Range Extender.
Store the Range Extender in a dry environment between 0°C and 30°C and protected from di-
rect sunlight.
Very cold temperatures lead to reduced utilisation times. Do not use in temperatures below 0°C.
Flyability cannot guarantee the Range Extender capability if not used in temperatures from 0°C to 50°C.
It is not recommended to use the Range Extender close to power lines, power transformers or
other areas with large electromagnetic disturbances.
The Range Extender should not be used in or near explosive or flammable environments. The removable antennas provided by Flyability, emit the highest level of radiation perpendicular
to the body of the antenna. To further improve system performance, the antennas should be placed at 90° to each other.
The Antenna Module emits the highest level of radiation, perpendicular to the cables feeding
the unit. To ensure the best performance, Flyability recommends using the system in a dry en­vironment, with a minimum of 5cm between the antennas and surrounding surfaces. If the an­tenna module is in direct contact with metallic structures, the quality of the signal and range can be degraded.
Liquids have serious effects on the Range Extender. The Range Extender will not function cor-
rectly if in contact, half or completely submerged in water. Moreover, if the module is wet, its performance will be reduced.
Avoid moisture or dust entering all system connectors.
ORIGINAL INSTRUCTIONSORIGINAL INSTRUCTIONS Page 15 of 24
Strictly confidential
ELIOS
Use
Reminder: Turn on the Configurable RC only after connecting the antennas
.
Reminder: Turn off the Configurable RC prior to unplugging the antennas
.
Use
Two configurations are possible:
- Configurable RC with Removeable Antennas
- Configurable RC with Range Extender
In both configurations, do not turn on the Configurable RC before completing the following setting­up procedures. Not following these guidelines can seriously damage the Configurable RC and de­crease the performance of the product.
CONFIGURATION WITH STANDARD ANTENNAS
SET UP
1. Remove the connector caps from the Remova­ble Antennas and the Configurable RC
2. Screw the Removable Antennas on to the Con­figurable RC
3. Place the antennas at a 90° angle to each other for optimal performance
PACK UP
1. Unscrew the Removable Antennas
2. Put the protective caps back in place on both the antennas and the Configurable RC
ORIGINAL INSTRUCTIONSORIGINAL INSTRUCTIONS Page 16 of 24
Strictly confidential
ELIOS
Use
Reminder: RC Cables MUST be connected before turning on the Configurable RC.
Reminder: The Configurable RC MUST be powered down prior to unplugging the cables.
CONFIGURATION WITH RANGE EXTENDER
SET UP
Remove the connector caps from the cables and the Configurable RC.
Connect the cables to the Configurable RC. Attach the Power Module to the surrounding environment or to yourself with the clip and leash.
Deploy the Power Module Cable first avoiding any twists or knots. Deploy the Antenna Module to the desired length. Place and secure a battery in the Power Module. Connect the battery power connector to power the system. Wait for the system to initialize. If after 5 seconds the status LED is not green, please refer to the
trouble shooting section.
Hint:
To assist in system deployment, white marks are located along the cable every metre and red
marks are located every 5 metres
PACK UP
Disconnect the battery power connector and remove the battery from the Power Module.
Power down the Configurable RC. Roll the Module Cable.
Detach the Power Module from the surrounding environment. Roll the RC Cables. Unscrew the RC Cables connectors from the RC. Place the connector caps on the ends of the RC Cables and Configurable RC connectors.
Hint:
To roll the cable to the correct diameter, align all marks placed along the cable.
ORIGINAL INSTRUCTIONSORIGINAL INSTRUCTIONS Page 17 of 24
Strictly confidential
ELIOS
Use
LED State
Signification
LED steady
LED blinking
LED off
LED Pattern
Battery Level
100% - 80%
80% - 60%
60% - 40%
40% - 20%
20% - 15%
15% - 0%
CHECKLIST
Configurable RC and Removable Antennas:
- Check that the two antennas are properly mated to the Configurable RC.
- Check that the two antennas are orientated at 90° to each other.
- Check that a steady green status LED is shown on the Power Module prior to starting a
mission.
Configurable RC and Range Extender:
- Check that both connectors are correctly mated to the Configurable RC.
- Check that the cables are functional. To do so, set up the Range Extender and ensure that
a connection is established with the aircraft AND that it can be controlled (e.g. turning the LEDs on, tilting the camera). Then, turn off the RC and swap the cables prior to turning the RC on again. Check once again that a connection can be established with the aircraft and that it can be controlled.
- Check that all LEDs and the buzzer are functioning correctly and confirm battery level is adequate:
ORIGINAL INSTRUCTIONSORIGINAL INSTRUCTIONS Page 18 of 24
Strictly confidential
ELIOS
Use
LED action
Sound
Signification
Beeps (indicating the number of white
LEDs illuminated) every 10 minutes.
The system is functioning correctly.
Beeps 2 times every 1 second.
There is a connectivity issue resulting in
the Antenna Module not being cor-
rectly powered. Check all system con-
nections.
TROUBLE SHOOTING
If a partially used battery is connected to the Power Module, the system is usable, however the battery state of charge estimation, as provided by the white LEDs, can be inaccurate. For this reason, Flyability recommends that a fully charged battery its used at the start of a mission.
If the 4 white LEDs are blinking, the battery state of charge is at a critical level and the system will shortly power down. After bringing the aircraft back to the operation site, change the Range Ex­tender battery for a new one.
ORIGINAL INSTRUCTIONSORIGINAL INSTRUCTIONS Page 19 of 24
Strictly confidential
ELIOS
Maintenance
Maintenance
INSPECTION
From time to time perform visual checks of the following:
Cables – Check for any cuts or abrasions.
SMA Connectors – Check for any build-up of dirt or bent pins within the connectors.
CLEANING
To clean your Range Extender, unplug the charging cable from the Configurable RC, power down and remove the battery from the Power Module. A damp cloth slightly moistened with water or a mild detergent solution can then be used to clean the system’s exterior. Avoid getting moisture into any of the openings and do not spray liquid directly on the system. Don't use aerosol sprays, abrasives or solvents such as alcohol or benzene that might damage the finish of the units.
Periodic cleaning of the SMA connectors on the Configurable RC and cables will ensure a continued high level of performance. To clean the inside of the connectors, use an appropriately sized cotton swab or tweezers and a small piece of cotton. For a more thorough clean, a small amount of denatured alcohol can be used on the swab, do not use water.
COMPONENT REPLACEMENT
The only user replaceable parts of the Range Extender are the 2m coaxial cables, the 20m coaxial ca­bles and the RC mounted antennas, all other replacements must be performed by Flyability. Please contact Flyability for part availability and installation guidelines.
HELP & SUPPORT
Visit https://my.flyability.com for more information.
ORIGINAL INSTRUCTIONSORIGINAL INSTRUCTIONS Page 21 of 24
Strictly confidential
ELIOS
Technical Specifications
USE
Deployment/Packing time < 5 min. Can be stored in Flyability’s aircraft case.
ERGONOMY
Lightweight (less than 2.5 kg). Battery change time < 1 min.
MAINTENANCE
Only Cables and Configurable RC Antennas are user replaceable, all other repairs must be carried out by Flyability.
FUNCTION
Houses the battery and provides power to the Range Extender system (NOT the Configurable RC). Displays battery state of charge and provides audible alerts. Includes integrated leash and clip for security unit to the surrounding environment.
POWER SUPPLY
Flyability 5C or 8C lithium polymer battery providing 2 hours operation time.
RUGGEDIZATION
Shock resistant (1.2 m free-fall). Temperature: 0 °C - 40 °C.
FUNCTION
Transmits/Receives data to/from the aircraft.
RUGGEDIEDIZATION LEVEL
Splash and dust resistant. Temperature: 0 °C - 40 °C.
ATTACHMENT
Thread compatible with most standard tripods (1/4-20 UNC).
VISIBILITY
Reflective surfaces visible from aircraft up to 10 meters awa y.
WEIGHT & DIMENSIONS
400 g (without cable). 350 mm x 150 mm x 50 mm (cannot enter aircraft cage).
MODULE CABLE
20m cable containing dual high performance coaxial cables with a maximum pull tension of 15kg.
RC CABLE (LEFT)
2m high performance RF cable.
RC CABLE (RIGHT)
2m high performance RF cable.
Technical Specifications
GENERAL
POWER MODULE
ANTENNA MODULE
CABLES
ORIGINAL INSTRUCTIONSORIGINAL INSTRUCTIONS Page 22 of 24
Strictly confidential
ELIOS
Technical Specifications
FUNCTION
Configurable controller allowing either monopole antennas or Range Extender to be connected.
VIDEO CONNECTORS
Standard HDMI output. Micro SDI output.
DATA CONNECTORS
USB type A (for tablet connection). USB micro (for updating controller firmware).
WEIGHT
810 g.
OPERATING TEMPERATUR E
-10 °C to 40 °C.
BATTERY
Lithium polymer battery, 2 cells, 6000 mAh.
REMOTE CONTROLLER
ORIGINAL INSTRUCTIONSORIGINAL INSTRUCTIONS Page 23 of 24
Strictly confidential
Content subject to change To download latest version Check on my.flyability.com
Loading...