Page 1
VERSION 1.0 – 05/13
© Copyright by
FLY
Products s.r.l.
Via Perù n. 30
63013 GROTTAMMARE (AP) - ITALY
tel./fax +39.735.632486
www.flyproducts.com - fly@flyproducts.com
XENIT SUPER
OWNER’S MANUAL
Page 2
XENIT SUPER OWNER’S MANUAL ____ ___ VER. 1.1
___________________________________________________________________________
© Copyright
FLY
Products s.r.l. Page
2
Index
Chapter Description
1.0
XENIT SUPER FEATURES
2.0
FRAME ASSEMBLY
3.0
EMERGENCY PARACHUTE
4.0
PROP MOUNTING
5.0
STARTING AND STOPPING ENGINE
6.0
ADJUSTING VERSION TANDEM OR MONO
7.0
A-ASSIST SYSTE M
Page 3
XENIT SUPER OWNER’S MANUAL ____ ___ VER. 1.1
___________________________________________________________________________
© Copyright
FLY
Products s.r.l. Page
3
(1.0) XENIT SUPER FEATURES
• Easy assembly and disassembly
• Electric Starter
• Power Ignition
• Reduction drive
Dimensions
Page 4
XENIT SUPER OWNER’S MANUAL ____ ___ VER. 1.1
___________________________________________________________________________
© Copyright
FLY
Products s.r.l. Page
4
(2.0) Frame assembly
Frame assembly and disassembly is very fast and easy.
The outer frame consists of four parts, and they are held together by the velcro straps.
For an easy and correct assembly proceed in the following or de r :
Page 5
XENIT SUPER OWNER’S MANUAL ____ ___ VER. 1.1
___________________________________________________________________________
© Copyright
FLY
Products s.r.l. Page
5
Page 6
XENIT SUPER OWNER’S MANUAL ____ ___ VER. 1.1
___________________________________________________________________________
© Copyright
FLY
Products s.r.l. Page
6
Page 7
XENIT SUPER OWNER’S MANUAL ____ ___ VER. 1.1
___________________________________________________________________________
© Copyright
FLY
Products s.r.l. Page
7
(3.0) Emergency parachute
A reserve parachute can be attached to the XENIT SUPER and is highly recommended for obvious
security reasons. The reserve parachute is inserted under the harness of the pilot.
Assembly procedure of the emergency system:
Insert the emergency in the
pocket
Using a string to close the bag
Attach the handle
Side view after complet e cl osu re
Pass the straps behind the harness
Attach the straps to carabiner
where the glider is attached
Page 8
XENIT SUPER OWNER’S MANUAL ____ ___ VER. 1.1
___________________________________________________________________________
© Copyright
FLY
Products s.r.l. Page
8
(4.0) Prop mounting
Mounting the prop is quick and easy.
Place the rear prop flange on the rear side of the prop.
Insert the six (6) prop bolts through the rear prop flange and
prop.
The correct torque to use is 28 Nm
A more practical “field method” of torquing is to tighten the
bolts snuggly and evenly, but not enough to begin to crush the
wood of the prop.
Mounting the prop, the red arrow indicate the direction of
propeller rotation.
(5.0) Starting and stopping engine
Stopping the engine
Before of proceed it's better to learn the function of the handgrip:
Page 9
XENIT SUPER OWNER’S MANUAL ____ ___ VER. 1.1
___________________________________________________________________________
© Copyright
FLY
Products s.r.l. Page
9
A – STOP” button
B – Cruise control setup
C – Throttle lever
Since it’s important to know how to stop the engine once it’s started, let’s cover “Stopping the Engine”
first. To stop the engine, simply depress the “STOP” button A and hold it until the engine comes to a
complete stop.
Starting the engine
Page 10
XENIT SUPER OWNER’S MANUAL ____ ___ VER. 1.1
___________________________________________________________________________
© Copyright
FLY
Products s.r.l. Page
10
Pump the fuel until the carburator float is
full.
Choke level to be used for the first start at cool
engine.
(6.0) Adjustments version tandem or mono
Page 11
XENIT SUPER OWNER’S MANUAL ____ ___ VER. 1.1
___________________________________________________________________________
© Copyright
FLY
Products s.r.l. Page
11
Page 12
XENIT SUPER OWNER’S MANUAL ____ ___ VER. 1.1
___________________________________________________________________________
© Copyright
FLY
Products s.r.l. Page
12
(7.0) A-Assist system
Page 13
XENIT SUPER OWNER’S MANUAL ____ ___ VER. 1.1
___________________________________________________________________________
© Copyright
FLY
Products s.r.l. Page
13
Page 14
XENIT SUPER OWNER’S MANUAL ____ ___ VER. 1.1
___________________________________________________________________________
© Copyright
FLY
Products s.r.l. Page
14
Warranty
FLY PRODUCTS will warrant their product to be free from defects in materials and workmanship for a
period of one year from the date of purchase. This warranty applies to the product in normal usage
situations only. The dealer, from whom you purchased the product, or FLY PRODUCTS, will repair the
product free-of-charge.
To obtain warranty service, please contact your dealer or FLY PRODUCTS, and then either bring the
product in or have it shipped. Shipping charges are the responsibility of the purchaser.
CAUTION: This warranty does not apply even during the warranty period, and the purchaser shall pay
repair or replacement charges if:
• The cause of malfunction is due to misuse, neglect, negligence, etc. This includes seize of the
engine due by an improper carburetor adjustment or improper fuel/oil mix.
• The malfunction is caused by incorrect pilot operation, i.e. a crash, whack, dork, bang, splat,
ding, prong, bend, tweak, trip, fall, bounce, or any other piloting eventuality.
• The malfunction is caused by lack of normal maintenance, or modification, i.e. loose parts
falling off and breaking the prop.
• The malfunction is caused by an Act of God, including but not limited to fire, earthquake,
hurricane, flood, or other natural calamity.
Internet info and upgr a de
For information, more details and news see our internet site: www.flyproducts.com
© Copyright by
FLY PRODUCTS
s.r.l.
Via Perù 30
63013 GROTTAMMARE (AP) - ITALY
tel./fax +39.735.632486
www.flyproducts.it - fly@flyproducts.it
Loading...