FLY SX215, SL300V Schematics

SL300V Technical Manual

1. Product Specification

2. Mechanical Construction

3. Circuit Description

4. IC Information

5. Spare Part List

- COMPANY CONFIDENTIAL -

Ezze Mobile Tech., Inc

Fax.

Tel. [phone]

[phone]

Section 1 – Product Specification

Contents Page

SL300V specifications ..…...…………..…………………………………………… 1.1
Standard charger …………………………..…………………………………………. 1.4
Batteries ………………………………..…………….………………………………… 1.5

- COMPANY CONFIDENTIAL -

Ezze Mobile Tech., Inc

Fax.

Tel. [phone]

[phone]

Section 2 – Mechanical Construction

Contents Page

Disassembly ……………………………………………………………………………... 2.1
Phone disassembly …………………………..……………………………….……… ... 2.2
Phone Assembly ………………………………………………………………………… 2.6

- COMPANY CONFIDENTIAL -

Ezze Mobile Tech., Inc

Fax.

Tel. [phone]

[phone]

Section 3 – Circuit Description

Contents Page

Baseband section ……………………………………………………………………… 3.1

MT6227 ( GSM/GPRS Baseband processor ) …………..……………………… 3.1

MT6318BN ( GSM Power Management System ) ……………………………… 3.38

SL300V-2.0M ( C-MOS Camera Module ) ………………………………………… 3.42

LRS18CA( MCP ) …………………………………………..……………………….… 3.43

HY27US08121A( Nand Flash EEPROM ) ……………………………………… 3.44

RF section .................................................................................................................. 3.46

MT6120 ( RF Transceiver IC ) ……………………………………...……………… 3.46

RF3146 ( QUAD-BAND Power Amplifier Module ) …………………………. 3.49

LMSP54HA-348TEMP ( Antenna Switch Module for Tri Band ) …………… 3.51

- COMPANY CONFIDENTIAL -

Ezze Mobile Tech., Inc

Fax.

Tel. [phone]

[phone]

Section 4 – IC Information

Contents Page

Pin out for U 204 …………………………………………………………...……….….. 4.1
Pin out for U 203 …………………………………………………………...……….….. 4.2
Pin out for BAT 100 …………………………………………………………...……….. 4.3
Pin out for U 109 ……………………………………………………………...……….. 4.4
Pin out for U 150 ……………………………………………………………...……….. 4.5
Pin out for CON 103 …………………………………………………………...……….. 4.6
Pin out for U 601 …………………………………………………………...……….….. 4.7
Pin out for U 600……………………………………………………...……….……….. 4.8

Pin out for U 50…………………………………………………………...……….….. .. 4.9

Pin out for U 201…………………………………………………………...……….….. 4.10
Pin out for F 100…………………………………………………………...……….…… 4.12
Pin out for U 101…………………………………………………………...……….…… 4.13
Pin out for U 103…………………………………………………………...……….…… 4.16
Pin out for U 800 ………………………………………………………………………… 4.17

Pin out for D103, D104, D110 …………………………………………………………… 4.21

Pin out for D111 – D116 ………………………………………………………………. 4.22
Pin out for ZD102 – ZD106 …………………………………………………………… 4.23

Pin out for D102, D605 ………………………………………………………..……..... 4.24

Pin out for U200 …………………..…………………………………………………….. 4.25

Pin out for U100 ……………………………………………………………………........ 4.27

Pin out for U110 ……………………………………………………………………........ 4.38

Pin out for U106 ……………………………………………………………………........ 4.40

Pin out for U3 ………………………………………………………………………........ 4.41

- COMPANY CONFIDENTIAL -

Ezze Mobile Tech., Inc

Fax.

Tel. [phone]

[phone]

Section 5 – Spare Part List

Contents Page

SL300V Part List ………………………………………………………………………... 5.1

- COMPANY CONFIDENTIAL -

Ezze Mobile Tech., Inc

Fax.

Tel. [phone]

[phone]

Model SL300V Version V_1.0

Prepared by H/W Date 2008.05.23

Subject Technical Manual Page 1/5

SL300V Specifications

General specification Trial Band EGSM Class 4/DCS & PCS

class1 handheld cellular telephone

Type approval No. SL300V

Dimensions (mm): Including 500mAh Li-Ion battery

Weight: Including 500mAh Li-Ion battery

Display type Main LCD

Display capacity 176x220 dots, Dithering 262K color, full

Display icons Soft icons: Signal, Battery, Message

Normal operating temperature
Keyboard 24 keys comprising:
1,2,3,4,5,6,7,8,9,*,0,#
YES(SEND), NO(END/ POWER),

Navigation-Key

Standard: 92 (L) x 48 (W) x 15.3 (D)

Standard: about 80 grammes

1.9 Inch Dithering 262K TFT color
graphics display

graphical

Vibration, Alarm, Call divert & barring, ,
Broadcast

-20°C to +60°C

2 Soft-Key

including LED backlight

Shot-Key, Volume-Key(UP&DOWN)

Ring tones 30 user selectable tones and off

Battery types Standard:500mAh Li-Ion(Min)

Talk time: 500mAh Li-Ion battery 2¹ - 3² hours approximately

Standby time: 500mAh Li-Ion battery 140 hours approximately

Note²: Measured on EGSM 900 with power level 5
Note²: Measured on DCS & PCS 1900 with power level 0

Battery rapid charging time: 500mAh Li – Ion(standard)

The talk and standby times are subject to
network conditions.

1½-2 hours to >90% of full capacity

Charging Voltage 5.0V

Nominal battery voltage: 500mAh Li - Ion 3.8V

Battery charging CC and CV Mode

Antenna type Intenna Type

(subject to network implementation) 16X16,10X12,8X8 Numeral display

8x8,10x10,11x11,12x12,13x14 Roman
display
Support Phase 2 plus Feature

Model SL300V Version V_1.0

Prepared by H/W Date 2008.05.23

Subject Technical Manual Page 2/5

64 Poly stereo sounds
Graphics and animated icons
Phone memory location (200
numbers)
Dynamic text display
Easy text input (T9)
SIM application tool kit

External interface connections RS232, USB
Number of channels EGSM:174 Channel

DCS : 374 Channel
PCS: 299 Channels

Operating frequency range - transmitter EGSM TX : 880MHz to 915MHz

DCS TX : 1710MHz to 1785MHz
PCS TX: 1850 MHz to 1910 MHz

Operating frequency range - receiver EGSM RX : 925MHz to 960MHz

DCS RX : 1805MHz to 1880MHz
PCS RX: 1930 MHz to 1990 MHz

Model SL300V Version V_1.0

Prepared by H/W Date 2008.05.23

Subject Technical Manual Page 3/5

Battery Connector

Function Description

1 VBat Battery Supply Pin(Right)
2 Battery ID Battery ID Resistor Pin 10Kohm(Middle)
3 GND GND(Left)

Connector layout

Pin description

1
2
3
4
5
6
7
8

9
10
11
12
13
14

USBPWR/VCHA USB Power Input

EJ_OUT_L Cradle Audio Output

RXD Serial Interface RX

EJ_IN Cradle Enable/ Mic Input

USBPWR/VCHA USB Power Input

VBAT Battery Voltage +3.8V
VBAT Battery Voltage +3.8V

EJ_OUT_R Cradle Audio Output

TXD Serial Interface TX
GND GND

P_ON/OFF Power On/Off Pin

USBDP USB D+ Input/Output

USBDM USB D- Input/Output

USBPWR USB Power Input

Model SL300V Version V_1.0

Prepared by H/W Date 2008.05.23

Subject Technical Manual Page 4/5

Standard charger

SL300V is supplied with a linear charger as standard. The charger is connected to the transceiver
through the bottom port.
Charging of the battery can only be carried out when the battery is fitted to the phone. There are no
serviceable parts within the main plug.

Input parameter Type Value Unit
Input voltage min 90 V
nom 230 V
max 264 V
Input frequency min 47 Hz
nom 50 Hz
max 63 Hz
Input current max 200 mA
Efficiency min >55 %

Output parameter Type Value Unit
Output current(CV) min 0.650 A
max 0.800 A

(CC) min 0.000 A
max 0.650 A
Output voltage(CV) min 3.0 V
max 4.9 V

(CC) min 4.9 V

max 5.3 V

Connector 14 Pin Bottom Connector
Cable length 1.9 m.

Model SL300V Version V_1.0

Prepared by H/W Date 2008.05.23

Subject Technical Manual Page 5/5

Batteries

Standard Battery 500mAh Li-Ion(Min)

Type: Lithium Ion Rechargeable Battery
Capacity 25°C: 500mAh
Standby time: up to 100 hours.
Talk time (1800MHZ): 30dBm: 2.5 hours 3 hours*
Charging time: 1½-2 hours approximately to full capacity.
Charge temperature: 0 to +45°C.
Discharge temperature: -20 °C to +60°C.
Cycle life 100% cap. to 80% cap. 500 cycles.
Energy Density 344Wh/I 150Wh/kg
Dimension (W x H x L): 3.6 T x 34 W x 43 L mm.
Weight: 14.0 g.

*Operating times depend on network and usage. Variability will occur. DTX +40% (included).

Storage temperature:
Short period <1 month: -20°C to +45°C.
Long period <1 year: -20°C to +25°C.

Model SL300V Version V1.0

Prepared by H/W Date 2008.05.23

Subject Technical Manual Page 1/15

Disassembly

This section covers the assembly and disassembly of SL300V phone. In order to carry out the
assembly or disassembly the following precautions should be taken:

1. A Plus screwdriver is required to remove the four retaining screws, which holds the two casings

together. Ensure that the screwdriver is narrow enough to reach the screws without causing
damage to the casing parts.

2. The phone should always be placed on a soft surface to minimise the risk of damage being

caused to the casing, window and keypad. If the PCB is to be removed, then care should be taken

not to stress or scratch the exposed LCD.

3. Observe anti-static precautions when handling the main PCB or any of its components.

4. Repairs carried out by unauthorised persons will result in the warranty on the unit becoming

void.

5. Do not use solvents to clean any of the casing parts or the LCD window.

Phone disassembly

1. Battery Cover Disassembly

A. Shove battery cover out along the direction of arrow and remove battery cover.
B. Push up battery along the direction of arrow and remove battery.

2. SIM card & TF card & caps & screws & rear cover Disassembly

Model SL300V Version V1.0

Prepared by H/W Date 2008.05.23

Subject Technical Manual Page 2/15

A. Remove SIM card
B. Remove TF card
C. Remove four caps and four screws. Carefully separate two covers

(front and rear)

3. Side key & Camera key & Disassembly

A. Remove side key and camera key along the arrow direction.

4. Main PCB & Main keypad & Cap IO Disassembly

Model SL300V Version V1.0

Prepared by H/W Date 2008.05.23

Subject Technical Manual Page 3/15

Separate Main PCB manual ASS’Y, Main keypad ASS’Y and Cap IO ASS’Y from front
cover.

Model SL300V Version V1.0

Prepared by H/W Date 2008.05.23

Subject Technical Manual Page 4/15

5. Front cover & Deco rail Disassembly

A. Unscrew four slide unit screws from front cover
B. Remove deco rail from front cover.

6. Slide unit & Stopper & Back cover Disassembly

Model SL300V Version V1.0

Prepared by H/W Date 2008.05.23

Subject Technical Manual Page 5/15

A. Remove two caps and four screws and carefully separate two covers

(top and back)

B. Unscrew six slide unit screws and remove slide unit
C. Remove slide unit
D. Pull off four stoppers from back cover

7. Lcd module & Keypad Disassembly

Model SL300V Version V1.0

Prepared by H/W Date 2008.05.23

Subject Technical Manual Page 6/15

A. Remove LCD manual ASS’Y from top cover.
B. Remove keypad from top cover..

8. Deocration top cover and Main window Disassembly

Model SL300V Version V1.0

Prepared by H/W Date 2008.05.23

Subject Technical Manual Page 7/15

A. Pull off decoration top cover from top cover
B. Pull off main window from Top cover.

Phone Assembly

Model SL300V Version V1.0

Prepared by H/W Date 2008.05.23

Subject Technical Manual Page 8/15

1. Top cover assembly

A. Attach the D/T decoration slide key on the top cover
B. Attach the decoration slide key by heat
C. Attach the mesh receiver on the top cover.
D. Attach the D/T decoration top cover on the top cover.

2. LCD manual ASS’Y & slide keypad ASS’Y assembly

Model SL300V Version V1.0

Prepared by H/W Date 2008.05.23

Subject Technical Manual Page 9/15

A. Thrust four stoppers in stopper hole.
B. Assemble the magnetic in magnetic position.
C. Assemble the slide unit with back cover.
D. Screw up six slide unit screws.
E. Attach the D/T decoration back cover.
F. Attach the decoration back cover.

3. LCD manual ASS’Y & slide keypad ASS’Y assembly

Model SL300V Version V1.0

Prepared by H/W Date 2008.05.23

Subject Technical Manual Page 10/15

A. Group the slide keypad ASS’Y into the top cover.
B. Group the LCD manual ASS’Y into the top cover.
C. Attach the cushion LCD on the LCD glass.
D. Attach the main window on the top cover.
E. Group the decoration top cover on the top cover.

4. Slide ASS’Y assembly

Model SL300V Version V1.0

Prepared by H/W Date 2008.05.23

Subject Technical Manual Page 11/15

A. Group the back cover.
B. Screw up four screws.
C. Attach the two cap screws.

5. Front cover & Deco rail Assembly

Model SL300V Version V1.0

Prepared by H/W Date 2008.05.23

Subject Technical Manual Page 12/15

A. Group the front cover with Deco rail.
B. Screw up four slide unit screws.

6. Main PCB & Main keypad Assembly

Model SL300V Version V1.0

Prepared by H/W Date 2008.05.23

Subject Technical Manual Page 13/15

A. Group the main keypad ASS’Y, cap IO ASS’Y and main PCB manual ASS’Y with

front cover.

7. Side key ASS’Y & Camera key ASS’Y Assembly

A. Group the side key ASS’Y and camera key ASS’Y along the arrow direction.

Model SL300V Version V1.0

Prepared by H/W Date 2008.05.23

Subject Technical Manual Page 14/15

9. Sim card & screw & caps & rear cover Assembly

A. Assemble the rear cover.
B. Screw up four screws and put in five caps.
C. Put the TF card and SIM card in.

10. Battery & Battery Cover Assembly

Model SL300V Version V1.0

Prepared by H/W Date 2008.05.23

Subject Technical Manual Page 15/15

A. Put the battery in.
B. Put the battery in and shove battery cover in along the direction of arrow.

MODEL SL300V VERSION V_1.0

PREPARED BY H/W DATE 2008.05.23

SUBJECT TECHNICAL MANUAL PAGE 1/57

Baseband section

This document provides a description of the baseband section of the SL300V. Most design decisions
are explained, but no detailed calculations are included. Total chip solutions(MT6227, MT6305,
MT6120) except for RF Power Amplifier(RF3146) are from Media Tek, Taiwan.

I. MT6227 ( GSM/GPRS Baseband Processor )

1. System Overview

The Revolutionary MT6227 is a leading edge single-Chip solution for GSM/GPRS mobile phones targeting

TM

the emerging applications in digital audio and video. Based on 32bit ARM7EJ-S
MT6227 not only features high performance GPRS Class 12 MODEM, but also provides comprehensive
and advanced solutions for handheld multi-media.
The Figure 1 is shown Typical Application for MT6227.

RISC processor,

Figure 1 : Typical Application for MT6227

SL300V TECHNICAL MANUAL

MODEL SL300V VERSION V_1.0

PREPARED BY H/W DATE 2008.05.23

SUBJECT TECHNICAL MANUAL PAGE 2/57

Figure 2 is shown the Block Diagram of MT6227 for detailly.

Figure 2 : Block Diagram of MT6227

SL300V TECHNICAL MANUAL

MODEL SL300V VERSION V_1.0

PREPARED BY H/W DATE 2008.05.23

SUBJECT TECHNICAL MANUAL PAGE 3/57

2. Product Description

Pin Outs

One type of Package for this product, TFBGA 13x13mm, 296balls, 0.65mm pitch package, is offerd.
Pin outs and the top view are illustrated in Figure 3,4.

Figure 3 . MT6227 Pin Out(Top View).

SL300V TECHNICAL MANUAL

MODEL SL300V VERSION V_1.0

PREPARED BY H/W DATE 2008.05.23

SUBJECT TECHNICAL MANUAL PAGE 4/57

-. Top and Bottom View

Top Masking Definition

Figure 4.Top and Bottom View

Figure 5. Top masking definition

SL300V TECHNICAL MANUAL