Fluke Networks Fluke Networks CIQ-KIT, Fluke Networks CIQ-GSV2 Manual

C a b l e I Q™ Q u a l i f i c a t i o n Te s t e r

I n s i d e w i r i n g / c o a x q u a l i f i c a t i o n t e s t e r

The CableIQ™ Qualification

The CableIQ™ Qualification Tester is the

first of its kind designed for residential

applications. It quickly qualifies

residential cabling systems to support

voice, CATV, 10/100/1000 Ethernet, and

VoIP. It replaces multiple tools for testing

and troubleshooting all voice, data, and

coax wiring. Built-in TDR graphically shows

distance to faults (e.g., pin 1 break at

37 feet) and can be used to map and ID

tag a bridged telco system. Its professional

documentation capabilities help to elimi-

nate callbacks and workmanship disputes.

Lightweight, rugged, reliable unit requires

Tester from Fluke Networks:

Qualifies residential cabling systems to

•

support CATV, 10/100/1000 Ethernet,

voice and VoIP.

Tests and troubleshoots all coax, data, and

•

voice wiring.

Graphically maps wiring configuration and

•

shows distance to faults with built-in TDR.

•

Locates and traces cables with IntelliTone™

digital signaling technology.

•

Reduces installation costs by eliminating

callbacks and disputes.

•

Includes software for managing and

printing professional test reports.

•

Documents that cabling systems were

installed properly and will perform reliably.

Figure 2. Measure length, verify continuity, and measure
the distance to shorts and breaks.

Figure 3. Detect CATV video signal.

no training to get started.

Coax cable testing

Now there’s a multifunctional tester for all

home cabling media. With the prominence

of coax in the home, you need a tool that

can quickly and easily test quality of coax

cabling, and verify whether video outlets are

live or not. The CableIQ™ Qualification Tester

gives you several ways to test coax cabling:

Figure 1. Quickly qualify coax cabling for video/CATV
applications with four-second autotest.

Figure 4. Run a coax TDR trace to see where large
impedance changes are located.

99 Washington Street
Melrose, MA 02176

Phone [phone]
Toll Free 1-800-517-8431

Technical Data

Visit us at www.TestEquipmentDepot.com

Qualify and troubleshoot inside wiring for video, data and voice –
at the push of a button

Intelligent wiremap

switch

F1 F2

EXIT TEST

ENTER

F1 F2

EXIT TEST

ENTER

computer

open

analog phone

security camera/
video

10

100

1000

Gig

Mbps

cabling bandwidth

The CableIQ™ Tester’s “intelligent wiremap”

feature tests for length, shorts, split pairs,

or opens and displays with an intuitive

graphical interface where a fault is located.

Unlike other testers that just show a series

of numbers for a wiremap, the unit displays

an easy-to-read graph with distance to faults

proportional to the cable length. It also iden-

tifies breaks and shorts by pin, rather than

by pair. This dramatically reduces the time to

locate and troubleshoot a poorly terminated

jack, or a break in the middle of a cable.

Figure 5. CableIQ tester’s “intelligent wiremap” shows pin 6
open at far end of tested cable (130 feet/34 meters).

Telephone wire test

CableIQ tester’s “multi-map” is a break-

through feature for residential cable testing.

Smart cable identifiers give the unique ability

to wiremap star wiring configurations often

found in residential voice systems. Wiremap

faults and ID number (up to seven) of any

jack can be seen from the main unit, all

at once.

Figure 6. CableIQ tester’s “multi-map” shows wiremap and
ID# of up to seven voice outlets at once.

N E T W O R K S U P E R V I S I O N

Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176 - TestEquipmentDepot.com