Fluke FLK-Ti125, FLK-Ti110, FLK-Ti105, FLK-TiR125, FLK-TiR110 User Manual

Find it. Fix it.
FAst

.

Find it. Fix it.
FAst

.

Fluke CNX™ Series System

Capture critical
measurements

WIRELESSLY.

Fluke Thermal
Imagers are now
part of the CNX
Wireless Solution.

Meet the Fluke CNX™ Series Wireless Team.

0.0

68.6

71.5

51.2

V AC

A AC
A AC
A AC

Auto

1
2

3

0.0

27.9

191.2

15.6

V AC

A AC
V AC
A AC

Auto

1
2

3

0.0

29.3

28.3

29.6

V AC

A AC
A AC
A AC

Auto

1
2

3

INRUSH

Hz

L1 L2 L3

Determining current unbalance

Motor power
cabinet

INRUSH

Hz

INRUSH

Hz

INRUSH

Hz

0.0

46.7

50.1

29.4

V AC

A AC
A AC
A AC

Auto

1
2

3

OR

Note: Use a wireless multimeter or
a thermal imager. Both tools can not
be used simultaneously to receive
wireless measurements.

TM

your tools—CoNNeCteD.
take reaDiNgs quiCker. solve problems Faster.

You see what’s happening with your
thermal imager. Now help uncover root
causes, by connecting CNX™ wireless
current modules to your imager.

Now there’s a fast and convenient way to
capture current measurements from up to
five wireless modules at once using your
thermal imager.
New CNX™ wireless modules
communicate with your imager and store
both absolute and relative measurement
readings right along with the thermal
image. Inspect motors and switchgear,
breaker panels, fuses and other equipment
more thoroughly. Figure out whether those
temperature differences are normal or not
and start uncovering potential causes. You
can also verify that electrical inspections
are conducted at 40

% current load—

consistent with best practices.

Download your data to a PC for analysis

®

with SmartView

software. Documenting
the thermal images together with current
measurements adds validity to your
analysis and makes your inspections more
thorough. Determine whether you need to
bring in other Fluke test and measurement
tools, such as a power quality meter, a

®

vibration tester or ScopeMeter

handheld

oscilloscope to fully diagnose problems.

Easier measuring, even in difficult or
dangerous locations

Set up wireless modules in an electrical cabinet,
near rotating machines, or in harsh environments
on equipment you want to monitor. Then step back
and take readings from a safe distance or a more
comfortable spot. You’ll improve safety by mini­mizing your exposure to those conditions.

Use modules as stand-alone tools too
The CNX modules not only communicate with
your thermal imager, but can also be used as

WIRELESS TOOLS

The team. Fluke CNX™ tools work

together. Remotely. Simultaneously.

Conveniently.

stand-alone test tools. Capture measurements
over time and then download to a computer later
for reporting, tracking and documentation. It’s
ideal for preventive maintenance.

Set up is as easy as 1, 2, 3

WIRELESS THERMAL IMAGER

The captain. Display measurements

from up to 5 wireless modules

within the thermal image.

SOFTWARE

The statistician. Get the data from

up to five measurements from

each infrared image in SmartView

analysis and reporting software.

®

It’s free and easy to activate the wireless radio
in your Fluke Thermal Imager (wireless is cur­rently available on the following models: Ti125,
TiR125, Ti110, TiR110, Ti105, TiR105 and Ti100).

1. Connect your wireless Fluke thermal imager to
your computer with the USB cable provided and
open the latest version of SmartView® software.

2. Select “Enable CNX wireless system” in the
imager’s menu and you’ll be directed to a
Fluke website. Simply enter the unit’s serial

Possible Applications

Troubleshooting systems Measure incoming current Measure current loadDetermining current imbalance

Troubleshooting systems

Measuring incoming current

number and your contact information to get
an authorization code. Once you’ve entered
the code into the SmartView form, the firm­ware download begins.

3. After the download is complete, the CNX mod­ules and thermal imager can communicate
and you will begin to realize the benefits of
the Fluke CNX wireless system.

View the easy 1, 2, 3 video at:

www.fluke.com/ti-cnx-1-2-3

Easy on your budget

With the free firmware download there’s no
additional cost to add the convenience and effi­ciency of wireless capability. No need to return
it to Fluke for the upgrade—your imager never
leaves your side. The CNX wireless modules are
affordable, and can be added as needed…and
they are built with the Fluke quality and inno­vation that you demand. You can expect to see
additional CNX wireless modules from Fluke in
the near future, adding even greater value to
your thermal imaging investment.

Measuring current load

These illustrations demonstrate a few
different ways the CNX system can be used.
Visit our website or ask your distributor
for more information and to see other
CNX applications.

Note: Use a wireless multimeter OR
thermal imager. Both tools can not be
used simultaneously to receive wireless
instruments.

CAT

CAT

600V

600V

CAT

CAT

300V

300V

L1 L2 L3

CAT

600V

CAT

300V

Note: Use a wireless multimeter or
a thermal imager. Both tools can not
be used simultaneously to receive
wireless measurements.

OR

INRUSH

Hz

CAT

CAT

L2

L1

CAT

CAT

600V

CAT

600V
CAT

300V

300V

600V

CAT

600V
CAT

600V

CAT

600V
CAT

CAT

CAT

300V

300V

CAT

CAT
300V
300V

Note: Use a wireless multimeter or a thermal imager.
Both tools can not be used simultaneously to receive
wireless measurements.

OR

Note: Use a wireless multimeter or
a thermal imager. Both tools can not
be used simultaneously to receive
wireless measurements.

600V

600V

CAT

CAT

300V

300V

CAT

CAT

600V

600V

CAT

CAT

300V

300V

OR

TM

CNX™
Series
Wireless
System:

Fluke CNX enabled

Thermal Imagers

FLUKE CNX™ SERIES
WIRELESS SYSTEM

Your tools connected.
The new Fluke wireless trouble­shooting team works together to
help you solve problems faster.
See live measurements from
multiple modules simultaneously.
Customize your tool set by mixing
and matching to suit your unique
testing needs and provide maxi­mum flexibility.

Wireless will change the way
you work

• No more running around

• Pen and paper no longer

needed

• No more waiting around

• No more uncomfortable

positions

AC Voltage

Module

AC Current

Clamp Module

AC Current

Clamp Module

iFlexTM AC

Current Clamp

Module

CNX a3000

Model Description

Kits (

Buy a system or kit a nd save)

FLK-Ti125/C3i 30Hz Industrial-Commercial Thermal Imager 30 Hz with 3 CNX-i3000

FLK-Ti100/C1a 9Hz General Purpose Thermal Imager 9 Hz with 1 CNX-a3000

CNX main units

FL K-T i125 Thermal Imager for Industrial and Commercial Applications

F L K -T i110 Thermal Imager for Industrial and Commercial Applications

FL K-Ti105 Thermal Imager for Industrial and Commercial Applications

FL K-T i R125 Building Diagnostic Thermal Imager

F L K -T iR110 Building Diagnostic Thermal Imager

FL K-Ti R105 Building Diagnostic Thermal Imager

FLK-Ti100 General Use Thermal Imager

CNX 3000 Wireless Multimeter

CNX modules

FLK-CNX i3000 iFlex AC
Current Clamp Module

FLK-CNX a3000 AC
Current Clamp Module

FLK-CNX v3000 AC
Voltage Module

FL K-C NX t30 00 K-Type
Temperature Module

PC adapter

FLK-CNX PC3000
PC Adapter

CNX a3000

FLK-CNX 3000 Series iFlexTM Module and accessories

FLK-CNX 3000 Series AC Current Clamp Module

FLK-CNX 3000 Series AC Voltage Module and accessories

FLK-CNX 3000 Series K-type Temperature Module and accessories

Allows for wireless transfer of logged data or thermal images into pc software
(not valid for the thermal imager)

CNX i3000

CNX t3000

K-Type

Temperature

Module

*Find out more about t he benefits of wireless measurement capture at www.fluke.com/thermography.

Your Fluke Ti1XX thermal imager can be upgraded FREE to enable its CNX wireless capabilities.
Connect your thermal imager to your PC with the included USB cable. Open SmartView® software and update
to the most recent version. Then select the thermal imager icon, pull down the menu and select Enable CNX™.

Note: Upgrade is not available in all countries at this time.

Fluke Corporation

PO Box 9090, Everett, WA 98206 U.S.A.
Fluke Europe B.V.

PO Box 1186, 5602 BD
Eindhoven, The Netherlands

Modification of this document is not
permitted without written permission
from Fluke Corporation.

For more information call:

In the U.S.A. [phone] or
Fax [phone]
In Europe/M-East/Africa [phone] or
Fax [phone]
In Canada (800)-36-FLUKE or
Fax [phone]
From other countries [phone] or
Fax [phone]
Web access: http://www.fluke.com

©2013 Fluke Corporation.
Specifications subject to change without notice.
Printed in U.S.A. 2/2013 4314882A_EN