Fluke FiberInspector Pro FI-7000 Getting Started Manual

FI-7000 FiberInspector™ Pro

Video Probe

Getting Started Guide

The FI-7000 FiberInspector™ video probe lets you see dirt, scratches, and other
defects that can cause unsatisfactory performance or failures in fiber optic
networks.

Accessing the Product Manuals

This guide provides basic information to help you get started using the tester.
For more detailed information, see the latest versions of the Versiv Users
Manual and the Versiv Technical Reference Handbook provided on the Product
Manuals DVD and on the Fluke Networks website.

Safety Information

Warning or Caution: Risk of damage or destruction to equipment or software. See



explanations in the manuals.

Warning: Risk of fire, electric shock, or personal injury.



This key turns the Product on and off.



Warning

To prevent possible fire, electric shock, or personal injury:



Read all safety information before you use the Product.



Carefully read all instructions.



Do not open the case. You cannot repair or replace parts in the
case.



Do not modify the Product.



Use only replacement parts that are approved by Fluke Networks.



Do not touch voltages > 30 V AC rms, 42 V AC peak, or 60 V AC.



Do not use the Product around explosive gas, vapor, or in damp or
wet environments.

PN 4467086, 4/2014

2014 Fluke Corporation
All product names are trademarks of their respective companies.





Use this Product indoors only.



Use the Product only as specified, or the protection supplied by the
Product can be compromised.



Do not use and disable the Product if it is damaged.



Do not use the Product if it operates incorrectly.



Batteries contain hazardous chemicals that can cause burns or
explode. If exposure to chemicals occurs, clean with water and get
medical aid.



Remove the batteries if the Product is not used for an extended
period of time, or if stored in temperatures above 50 °C. If the
batteries are not removed, battery leakage can damage the
Product.



The battery door must be closed and locked before you operate
the Product.



Repair the Product before use if the battery leaks.



Recharge the batteries when the low battery indicator shows to
prevent incorrect measurements.



Do not disassemble or crush battery cells and battery packs.



Do not put battery cells and battery packs near heat or fire. Do not
put in sunlight.



Have an approved technician repair the Product.



For Products with rechargeable batteries, use only AC adapters
approved by Fluke Networks for use with the Product to supply
power to the Product and charge the battery.

Caution

To prevent damage to the Product or cables under test and to
prevent data loss, read all safety information given in all
documentation supplied with the Product.

Connectors, Keys, and LEDs

See Figure 1.



LCD display with touchscreen.



Blank module included with the FI-7000 kit. Keep the module installed to give
protection to the module connectors.



Micro-AB USB port: This USB port lets you connect the tester to a PC so you can
upload test results to the PC and install software updates in the tester.



Type A USB port: This USB host port lets you connect the FI-7000 probe to the
tester or save test results on a USB flash drive.

2

J

I

B

A

H

D

G

C

K



Headset jack.



: Starts a test. To start a test, you can also tap TEST on the display.



Power key.



: Press  to go to the home screen.



Connector for the ac adapter.



RJ45 connector: for functions available in future software releases.

L

Figure 1. Connectors, Keys, and LEDs

F

E

GPU173.EPS



Removable tip for different types of connectors.



Dial for focus adjustment.

3