Page 1
DTX-COAX
Coaxial Interface Adapters
Getting Started Guide
The DTX-COAX coaxial adapters let you use a DTX CableAnalyzer
to certify, troubleshoot, and document coaxial network and video cabling. The
coaxial adapters come with the accessories listed below. If something is
damaged or missing, contact the place of purchase immediately.
• Two DTX-COAX adapters
• Two female to female F-connector adapters
• Short (12 in; 30 cm) male to male F-connector cable
• Two F-connector female to BNC female adapters
Getting Started Testing Coaxial Cabling
Note
Turn on the tester and let it sit for 1 minute before setting the
reference. Set the reference only after the testers have reached an
ambient temperature between 10 °C and 40 °C (50 °F and 104 °F).
1 Attach coaxial adapters to the main and remote testers, screw in the
F-connector to BNC adapters; then connect the testers together using the
12-inch (30 cm) coaxial cable provided.
2 Turn the rotary switch to SPECIAL FUNCTIONS and turn on the smart
remote.
3 Highlight Set Reference; then press
adapter are attached, select Link Interface Adapter.
4 Press P.
PN 2404890 (English) November 2004
2004 Fluke Corporation. All rights reserved. Printed in USA.
All product names are trademarks of their respective companies.
H. If both a fiber module and copper
Series tester
-continued-
Page 2
5 Turn the rotary switch to SETUP.
6 Select Coax; then select an appropriate Cable Type and Test Limit for the
cabling you will test.
7 Turn the rotary switch to AUTOTEST and turn on the smart remote. Connect
the tester and remote to the cabling.
8 If Coax is not shown in the upper-left corner of the Autotest screen, press
J Change Media; then select Coax.
9 Press
Pon the tester or smart remote.
For More Information
The latest versions of the DTX Series Users Manual and the DTX Series Technical
Reference Handbook provide additional information on using the DTX-COAX
adapters. If your DTX manuals do not include this information, you may
download the latest manuals from the Fluke Networks website.
LIMITED WARRANTY AND LIMITATION OF LIABILITY
Fluke Networks mainframe products will be free from defects in material and
workmanship for one year from the date of purchase. Parts, accessories, product repairs
and services are warranted for 90 days, unless otherwise stated. Ni-Cad, Ni-MH and Li-Ion
batteries, cables or other peripherals are all considered parts or accessories. This warranty
does not cover damage from accident, neglect, misuse, alteration, contamination, or
abnormal conditions of operation or handling. Resellers are not authorized to extend any
other warranty on Fluke Networks’ behalf. To obtain service during the warranty period,
contact your nearest Fluke Networks authorized service center to obtain return
authorization information, then send your defective product to that Service Center with a
description of the problem.
THIS WARRANTY IS YOUR ONLY REMEDY. NO OTHER WARRANTIES, SUCH AS FITNESS FOR
A PARTICULAR PURPOSE, ARE EXPRESSED OR IMPLIED. FLUKE NETWORKS IS NOT LIABLE
FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSSES,
ARISING FROM ANY CAUSE OR THEORY. Since some states or countries do not allow the
exclusion or limitation of an implied warranty or of incidental or consequential damages,
this limitation of liability may not apply to you.
Fluke Networks
PO Box 777
Everett, WA 98206-0777
USA
4/04
Loading...