700HPPK
Pneumatic Test
Pump Kit
Generate 21 MPa (3000 psi) easily in the
field, without liquid contamination or the
hazard of a pressurized gas cylinder
The Fluke Calibration 700HPPK
Pneumatic Test Pump Kit generates
and adjusts pneumatic pressures
up to 21 MPa (3000 psi), without requiring a nitrogen bottle or
other external pressure supply. It
supplies pressure to devices under
test (DUTs) that include transmitters, controllers, pilots, digital and
analog gauges, and more. It’s the
perfect solution for generating
high pressure in the field, where
conditions and operating surfaces
can vary.
The 700HPPK is the ideal
choice for calibration technicians, test engineers, and
instrument technicians working
in industries like natural gas
transmission and distribution,
process, aerospace and defense,
who need a simple-to-use, safe
and portable pressure source
that they can depend on in a
wide variety of conditions.
The 700HPPK contains both
a calibration manifold and high
pressure pump to generate
and finely adjust pressures . A
second model, the 700HPP, is
available for people who only
prefer a high pressure source.
700HPPK features at a glance
• Generate and adjust pneumatic pressures up to 21 MPa (3000 psi)
• Rugged, portable and stable enough
to go anywhere—on any surface
• Reaches pressure in 20 seconds to
full scale into a 30 cm volume
• Detachable pressure adjustment
system for adjusting pressure, connecting reference and test devices on
bench and in field, and isolating and
venting pressure
• Easily switch out reference gauges
without requiring PTFE tape or tools
• 2-meter (6.5 foot) pressure line and
assorted pressure fittings enable a
wide variety of possible connections
• In-line filter and desiccant systems
protects device from contamination
from the DUT
Technical Data
4
5
10
3
7
6
1
The desiccant tube protects against
contamination from inlet gas.
2
The inlet valve (700HPPK only) is conveniently
2
8
located at the bottom of the calibration
manifold. Opening and closing this valve helps
to stabilize the pressure faster.
9
3
The vent valve lets you vent the pressure with
a simple turn of a knob (HPPK only).
4
The pump handle lets you generate pressure
easily and without physical straining.
5
The variable volume control lets you adjust the
pressure and achieve the exact target pressure
on the reference gauge (HPPK only).
6
The gauge port enables you to connect a
reference gauge to the calibration manifold
(HPPK only).
1
2 Fluke Corporation 700HPPK Pneumatic Test Pump Kit
7
The calibration manifold (700HPPK only)
attaches and detaches easily with quick detent
pins, so it’s easy to set up in the field.
8
External line providing simple and fast
connection to the Device Under Test.
9
Inlet port connecting the pump and adjustment
manifold.
10
The calibration manifold attaches to the pump
bracket.