700G Series
Pressure Gauge
Users Manual
November 2011
© 2011 Fluke Corporation. All rights reserved. Specifications are subject to change without notice.
All product names are trademarks of their respective companies.
LIMITED WARRANTY AND LIMITATION OF LIABILITY
This Fluke product will be free from defects in material and workmanship for three years from the date of purchase. This
warranty does not cover fuses, disposable batteries, or damage from accident, neglect, misuse, alteration, contamination, or
abnormal conditions of operation or handling. Resellers are not authorized to extend any other warranty on Fluke’s behalf.
To obtain service during the warranty period, contact your nearest Fluke authorized service center to obtain return
authorization information, then send the product to that Service Center with a description of the problem.
THIS WARRANTY IS YOUR ONLY REMEDY. NO OTHER WARRANTIES, SUCH AS FITNESS FOR A PARTICULAR
PURPOSE, ARE EXPRESSED OR IMPLIED. FLUKE IS NOT LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR
CONSEQUENTIAL DAMAGES OR LOSSES, ARISING FROM ANY CAUSE OR THEORY. Since some states or countries
do not allow the exclusion or limitation of an implied warranty or of incidental or consequential damages, this limitation of
liability may not apply to you.
11/99
Fluke Corporation
P.O. Box 9090
Everett, WA 98206-9090
U.S.A.
Fluke Europe B.V.
P.O. Box 1186
5602 BD Eindhoven
The Netherlands
Table of Contents
Title Page
Introduction .................................................................................................................... 1
How to Contact Fluke ..................................................................................................... 1
Standard Equipment....................................................................................................... 2
Safety Information .......................................................................................................... 2
Hazard Location Information/Approvals ..................................................................... 3
Special Conditions for Safe Use ................................................................................ 3
Symbols ..................................................................................................................... 4
Display and Buttons ....................................................................................................... 5
Operation ....................................................................................................................... 6
How to Setup the Product .......................................................................................... 6
Engineering Units ................................................................................................. 6
Set Auto Off .......................................................................................................... 7
Show Battery Voltage ........................................................................................... 7
Display Actual Temperature ................................................................................. 7
i
700G Series
Users Manual
Set Damping ........................................................................................................ 7
Set Sample Rate .................................................................................................. 7
Set TARE ............................................................................................................. 7
Function Lock ....................................................................................................... 8
Supervisory Mode ..................................................................................................... 8
Available Pressure Ranges ....................................................................................... 8
How to Set a Custom Engineering Unit or Scale....................................................... 9
Battery Life .................................................................................................................... 9
Maintenance .................................................................................................................. 9
How to Clean the Product ......................................................................................... 9
How to Change the Batteries .................................................................................... 10
Accessories ................................................................................................................... 11
RS-232 Interface ....................................................................................................... 11
Specifications ................................................................................................................ 12
Available Input Ranges ............................................................................................. 12
Accuracy ................................................................................................................... 12
Media Compatibility ................................................................................................... 12
Environmental ........................................................................................................... 12
Mechanical Specifications ......................................................................................... 13
PI Ranges and Resolution ........................................................................................ 14
ii
List of Tables
Table Title Page
1. Symbols ................................................................................................................................. 4
2. Display and Buttons .............................................................................................................. 5
iii
List of Figures
Figure Title Page
1. The Product ........................................................................................................................... 5
2. Change the Batteries ............................................................................................................. 10
v