Flow-Rite Pro-Fill RV Edition Installation & Operation Manual

Package Contents

A. Pro-Fill Valves (6)

B. Flexible Manifolds (2)

C. Quick Connect Coupler (1)

D. Dust Cap (1)

E. Red End Caps (9)

F. Pro-Fill Tubing (5’)

Important

they have been neglected and the

B

E

A

D

C

Illustraon purposes only. Actual product is subject to change.

1 2

F

.derevoc era setalp lla os llec hcae

installing and using Pro-Fill to top

been neglected and then charging
can cause the water level to expand

in the loss of electrolyte. Once Pro­Fill is installed, monthly topping

extremely low water level to occur.

3

Link manifolds/valves together with Pro­Fill tubing. Cut the desired length of
tubing from the open end of the included

Remove exisng vent covers and install
Pro-Fill valves by inserng into baery
and tuning ¼ rotaon to lock into place.

4

the system. Do not connect more than six

Install the flexible manifold by carefully
pushing and rotang swivel tee into each
valve unl it snaps into place.

5

Cover any remaining barbs with red end

BL-189

03/14

Important

charging.

1 2

Remove the dust cap from the water
supply line and connect it to the squeeze

couplers together.

3

When the bulb becomes hard, all cells are
full.

Notes:

1.

2.

3.

below freezing.

4

Immediately disconnect the squeeze bulb

and replace the dust cap.

5

Any water remaining in the squeeze bulb

Patent Pending

BL-189

03/14