Flowline LC80, LC82 Specifications
Thermo-Flo LC8X Remote Flow Controller
™
Application
®
The general purpose ow controller is offered in
two congurations for low-ow pump and process
protection. The LC80 accepts one ow sensor input
and provides one 10A relay for low ow control. The
LC82 accepts two ow sensor inputs and provides two
10A relays for dual low ow control. Package this ow
controller with our liquid or gas ow switch sensors. For
eld mount installation, add a single or dual controller
NEMA box.
Features
• Fail-safe relay control of pumps or valves with 0-60
second delay
• Easy setup with LED indicators for sensor, power and
relay status
• 35 mm DIN rail mount polypropylene enclosure with
removable terminal strips
• Invert switch changes relay state from NO to NC
without rewiring
Key Benets
• Connects to all Flowline Flow switches (FT10/
GT10)
• Mounts easily in control panel
• Switches loads up to 10 Amps including
valves, horns, buzzers, etc.
Compatible Products
Thermo-Flo™ FT10/GT10 Liquid & Gas Flow Switch Sensors
Application
Offered in liquid and gas sensor types, the general purpose ow switch provides reliable
low or no-ow detection of relatively clean, non-coating media with one 1A relay output.
Liquid examples include water and acetic acid. Available in Polypropylene-Ryton® and
PVDF, the short ow sensor is used in pipe or ducting from 1/2” to 1 1/2”, and the long
ow sensor is used in 2” and up. The ow switch set point may be adjusted from 0.04
to 3 fps in liquids, or 1 to 90 fps in gases as a low-ow alarm. The ow sensor is best
applied in applications with relatively constant temperature.
© 2014 Flowline Inc. • 10500 Humbolt Street Los Alamitos, CA 90720 • 562.598.3015 • www.owline.com • DS900009 REV B
Thermo-Flo LC8X Remote Flow Controller
3.6"
(92mm)
(68mm)
Ordering Notes
1) The flow controller is compatible with
Thermo-Flo liquid and gas flow sensors.
2) For field mount installation in a NEMA 4X
polycarbonate enclosure, order the LM94-1001
(single controller box) or the LM95-1001 (two
Flow Switch Remote Relay Controller
LC80-82 Series
Thermo-Flo
LC8 -1001
™
®
Specications
Supply voltage: 120 / 240 VAC @ 50-60 Hz
Consumption: 5 watts maximum
Sensor inputs: LC80: (1) four-wire
ow switch
LC82: (2) four-wire
ow switches
Sensor supply: 13.5 VDC @ 100 mA
LED indication: Sensor, power & relay
Contact type: LC80: (1) SPDT relay
LC82: (2) SPDT relays
Contact rating: 250 VAC @ 10A
Contact output: Selectable NO / NC
Dimensions
3.9"
3.1"
(79mm)
35mm
DIN Rail
POWER
STANDARD
CONTROLLER
INPUT 1 INPUT 2A INPUT 2B
(98mm)
INVERT
-
+
+
RELAY 1 RELAY 2
DELAY
LATCH
ON OFF
INVERT
-
DELAY
+
1.8"
(44mm)
Accessories
Protect your level controller from the elements by using the below
recommended single or two indicator NEMA box.
P/N Description
Single & Two Controller NEMA Box
2.7"
Contact latch: LC80: N/A
LC82: Selectable ON / OFF
Contact delay: 0-60 seconds
Ambient temp: F: -40° to 158°
C: -40° to 70°
Enclosure type: 35mm DIN rail
Enclosure mat.: PP, UL94VO
Classication: General purpose
Approvals: CSA, LR 79326
Ordering
Contact(s) / input(s) (1) (2)
0 1 Relay / 1 sensor
2 2 Relays / 2 sensors
© 2014 Flowline Inc. • 10500 Humbolt Street Los Alamitos, CA 90720 • 562.598.3015 • www.owline.com • DS900009 REV B
LM94-1001 Single Controller, Windowed,
35mm Rail, Polycarbonate
LM95-1001 Two Controller, Windowed,
35mm Rail, Polycarbonate
Notes
1) The ow controller is compatible with Thermo Flo liquid and gas ow sensors.
2) To order a CE conguration, please indicate
-CE at the end of the part number.
3) For eld mount installation in a NEMA 4X
polycarbonate enclosure, order the LM94 1001 (single controller box) or the LM95-1001
(two controller box) .
Loading...