Flowline LC40, LC41, LC42 User Manual
Warranty, Service & Repair
WARRANTY
Flowline warrants to the original purchaser of its products that such
products will be free from defects in material and workmanship under
normal use and service for a period which is equal to the shorter of
one year from the date of purchase of such products or two years from
the date of manufacture of such products.
This warranty covers only those components of the products which
are non-moving and not subject to normal wear. Moreover, products
which are modified or altered, and electrical cables which are cut to
length during installation are not covered by this warranty.
Flowline’s obligation under this warranty is solely and exclusively
limited to the repair or replacement, at Flowline’s option, of the products (or components thereof) which Flowline’s examination proves to
its satisfaction to be defective. FLOWLINE SHALL HAVE NO
OBLIGATION FOR CONSEQUENTIAL DAMAGES TO PERSONAL OR REAL PROPERTY, OR FOR INJURY TO ANYPERSON.
This warranty does not apply to products which have been subject to
electrical or chemical damage due to improper use, accident, negligence, abuse or misuse. Abuse shall be assumed when indicated by
electrical damage to relays, reed switches or other components. The
warranty does not apply to products which are damaged during shipment back to Flowline’s factory or designated service center or are
returned without the original casing on the products. Moreover, this
warranty becomes immediately null and void if anyone other than service personnel authorized by Flowline attempts to repair the defective
products.
Products which are thought to be defective must be shipped prepaid
and insured to Flowline’s factory or a designated service center (the
identity and address of which will be provided upon request) within
30 days of the discovery of the defect. Such defective products must
be accompanied by proof of the date of purchase.
Flowline further reserves the right to unilaterally wave this warranty
and to dispose of any product returned to Flowline where:
a. There is evidence of a potentially hazardous material present
with product.
b. The product has remained unclaimed at Flowline for longer than
30 days after dutifully requesting disposition of the product.
THERE ARE NO WARRANTIES WHICH EXTEND BEYOND
THE DESCRIPTION ON THE FACE OF THIS WARRANTY. This
warranty and the obligations and liabilities of Flowline under it are
exclusive and instead of, and the original purchaser hereby waives, all
other remedies, warranties, guarantees or liabilities, express or
implied. EXCLUDED FROM THIS WARRANTY IS THE IMPLIED
WARRANTY OF FITNESS OF THE PRODUCTS FOR A PARTICULAR PURPOSE OR USE AND THE IMPLIED WARRANTY OF
MERCHANT ABILITY OF THE PRODUCTS.
This warranty may not be extended, altered or varied except by a written instrument signed by a duly-authorized officer of Flowline, Inc.
To register your product with the manufacturer, go to the Flowline
website for on-line registration. The website address is as follows:
www.flowline.com
On-line Warranty Registration can be found under Contact
Flowline on the Navigation Bar along the side of the home page.
If for some reason your product must be returned for factory service, go to
the Flowline website listed above. Online Factory Service can be found
under Contact Flowline on the Navigation Bar along the side of the home
page. Click on Return Authorization to begin the registration process.
You will need the following information at the time of registration:
1. Part Number and full Serial Number from product
2. Name and telephone number of someone who can answer
technical questions related to the product and its application.
3. Return Shipping Address
4. Brief Description of the Symptom
5. Brief Description of the Application
Once you have received a Material Return Authorization number,
ship the product prepaid in its original packing to:
Flowline Factory Service
MRA _____
10500 Humbolt Street
Los Alamitos, CA 90720
To avoid delays in processing your repair, write the MRA on the
shipping label. Please include the information about the malfunction with your product. This information enables our service technicians to process your repair order as quickly as possible.
®
Version 5.1A
© 2007 FLOWLINE Inc.
All rights reserved.
Manual # MNC 40100 09/07
Remote Relay Controller
LC40, LC41 and LC42 Series
Owner’s Manual
Step One
SPECIFICATIONS
Supply voltage: 120 VAC (240 VAC), 50 - 60 Hz.
Consumption: 5 Watts max.
Sensor inputs: LC42: 1-3 sensors
LC41: 1-2 sensors
LC40: 1 sensor
Sensor supply: 13.5 VDC @ 27 mA
Relay type: LC42: (1) SPDT, (1) Latched SPDT
LC41: (1) Latched SPDT
LC40: (1) SPDT
Relay rating: 250 VAC, 10A, 1/4 hp.
Relay mode: Selectable, NO or NC
Relay latch: ON or OFF
Time delay: 0 to 60 seconds
LED indication: Sensor, relay & power status
Fail safety: Power fail-safe
Temperature range: F: -40° to 158°
C: -40° to 70°
Enclosure rating: 35 mm DIN (EN 50 022)
Enclosure material: Polypropylene (U.L. 94 VO)
Certificate number: LR 79326-3
CE compliance: EN 61326 EMC
EN 61010-1 safety
3.1" (79mm)
35mm
DIN Rail
3.6" (92mm)
3.9" (98mm)
1.8"
(44mm)
2.7"
(68mm)
STANDARD
CONTROLLER
RELAY 1 RELAY 2
POWER
INPUT 1 INPUT 2A INPUT 2B
-
+
-
+
INVERT
DELAY
INVERT
DELAY
LATCH
ON OFF
LC4 _ - 1 0 0 1
Configuration
0 - 1 Input, 1 Relay
1 - 2 Inputs, 1 Relay
2 - 3 Inputs, 2 Relays
Remote Relay Controller
STANDARD
CONTROLLER
RELAY 1 RELAY 2
POWER
INPUT 1 INPUT 2A INPUT 2B
-
+
-
+
INVERT
DELAY
INVERT
DELAY
LATCH
ON OFF
STANDARD
CONTROLLER
RELAY 1
POWER
INPUT 1A INPUT 1B
-
+
INVERT
DELAY
LATCH
ON OFF
STANDARD
CONTROLLER
RELAY 1
POWER
INPUT 1
-
+
INVERT
DELAY
L1
L2
GND
(+) (-)
NC
C
NO
(+)
(-)
(+) (-)
NC
C
NO
Latch/Invert Logic
Time Delay
Latch/Invert Logic
Time Delay
Sensor
Input
1A
Power
Supply
Sensor
Input
A*
Sensor
Input
A*
Relay
("Relay 1"
in LC42)
Relay
("Relay 2" in LC42)
Dimensions
Internal Controller Logic
LC42-1001 Faceplate
LC41-1001 Faceplate
LC40-1001 Faceplate
Loading...