Flowline FT10-1305, FT10-1405, FT10-5305, GT10-5405, GT10-5305 Instruction Manual
...
Warranty, Service & Repair
WARRANTY
Flowline warrants to the original purchaser of its products that such
products will be free from defects in material and workmanship under
normal use and service for a period which is equal to the shorter of
one year from the date of purchase of such products or two years from
the date of manufacture of such products.
This warranty covers only those components of the products which
are non-moving and not subject to normal wear. Moreover, products
which are modified or altered, and electrical cables which are cut to
length during installation are not covered by this warranty.
Flowline’s obligation under this warranty is solely and exclusively
limited to the repair or replacement, at Flowline’s option, of the products (or components thereof) which Flowline’s examination proves to
its satisfaction to be defective. FLOWLINE SHALL HAVE NO
OBLIGATION FOR CONSEQUENTIAL DAMAGES TO PERSONAL OR REAL PROPERTY, OR FOR INJURY TO ANYPERSON.
This warranty does not apply to products which have been subject to
electrical or chemical damage due to improper use, accident, negligence, abuse or misuse. Abuse shall be assumed when indicated by
electrical damage to relays, reed switches or other components. The
warranty does not apply to products which are damaged during shipment back to Flowline’s factory or designated service center or are
returned without the original casing on the products. Moreover, this
warranty becomes immediately null and void if anyone other than service personnel authorized by Flowline attempts to repair the defective
products.
Products which are thought to be defective must be shipped prepaid
and insured to Flowline’s factory or a designated service center (the
identity and address of which will be provided upon request) within
30 days of the discovery of the defect. Such defective products must
be accompanied by proof of the date of purchase.
Flowline further reserves the right to unilaterally wave this warranty
and to dispose of any product returned to Flowline where:
a. There is evidence of a potentially hazardous material present
with product.
b. The product has remained unclaimed at Flowline for longer than
30 days after dutifully requesting disposition of the product.
THERE ARE NO WARRANTIES WHICH EXTEND BEYOND
THE DESCRIPTION ON THE FACE OF THIS WARRANTY. This
warranty and the obligations and liabilities of Flowline under it are
exclusive and instead of, and the original purchaser hereby waives, all
other remedies, warranties, guarantees or liabilities, express or
implied. EXCLUDED FROM THIS WARRANTY IS THE IMPLIED
WARRANTY OF FITNESS OF THE PRODUCTS FOR A PARTICULAR PURPOSE OR USE AND THE IMPLIED WARRANTY OF
MERCHANT ABILITY OF THE PRODUCTS.
This warranty may not be extended, altered or varied except by a written instrument signed by a duly-authorized officer of Flowline, Inc.
®
Version 0.4A
© 2007 FLOWLINE Inc.
All rights reserved.
Manual # FT900003 09/07
Thermo-Flo™ Flow Switches
FT10 and GT10 Series
Owner’s Manual
To register your product with the manufacturer, go to the Flowline
website for on-line registration. The website address is as follows:
www.flowline.com
On-line Warranty Registration can be found under Contact
Flowline on the Navigation Bar along the side of the home page.
If for some reason your product must be returned for factory service, go to
the Flowline website listed above. Online Factory Service can be found
under Contact Flowline on the Navigation Bar along the side of the home
page. Click on Return Authorization to begin the registration process.
You will need the following information at the time of registration:
1. Part Number and full Serial Number from product
2. Name and telephone number of someone who can answer
technical questions related to the product and its application.
3. Return Shipping Address
4. Brief Description of the Symptom
5. Brief Description of the Application
Once you have received a Material Return Authorization number,
ship the product prepaid in its original packing to:
Flowline Factory Service
MRA _____
10500 Humbolt Street
Los Alamitos, CA 90720
To avoid delays in processing your repair, write the MRA on the
shipping label. Please include the information about the malfunction with your product. This information enables our service technicians to process your repair order as quickly as possible.
I
P
68
Step One
SPECIFICATIONS
Common Specifications:
175
150
125
100
075
050
025
000
00 20 40 60 80 100
Acceptable
Range
Unacceptable
Range
Temperature/Pressure Derating
Operating Pressure (psi)
Temperature (Cß)
PVDF PP
Thermo-Flo Ultrasonic Level Switch, FT10 Series
* all dimensions are Nominal
10
6
10
5
10
4
10
3
10
2
10
1
1
10
-1
1 10 100 150 1000
12"
8"
6"
4"
3"
2"
1"
3/4"
1/2"
90
GT10 Rate vs Velocity
Flow Rate (cfm)
Velocity (fps)
1000
100
10
1
0.1
0.01
.01 .04 .1 .2 1 3 10
6"
4"
3"
2"
1-1/2"
1"
3/4"
1/2"
12" 10" 8"
FT10 V olume vs Velocity
Flow Rate (gpm)
Velocity (fps)
Set Points:
The FT10 liquid flow switch set point is factory calibrated to
0.2 fps and the GT10 gas flow switch is set to 10 fps. To convert feet/sec to GPM, please refer to the chart below.
Set point range:
Factory set point:
Repeatability:
Response time:
Set point adjust.:
Viscosity range:
(FT10 only)
Supply voltage:
Consumption:
Contact type:
Contact rating:
Contact output:
Process temp.:
Electronics temp.:
Pressure:
Sensor rating:
Sensor material:
Cable jacket mat.:
Cable type:
Cable length:
Process mount:
Mount. gasket:
Classification:
CE compliance:
FT10: .04 to 3 fps
GT10: 1 to 90 fps
FT10: .2 fps (.06 mps)
GT10: 10 fps (3 mps)
±
.5% of set point
@ fixed temp.
1-10 seconds
Potentiometer
1-200 centipoise
12-36 VDC
70 mA maximum
(1) SPST relay
60 VA
Selectable NO/NC
F: 32˚ to 140˚
C: 0˚ to 60˚
F: -40˚ to 140˚
C: -40˚ to 60˚
150 psi (10 bar) @ 25˚
C., derated @ 1.667
psi (.113 bar) per ˚C.
above 25˚ C.
NEMA 4X (IP65)
1__5: PP-Ryton®
5__5: PVDF Kynar®
1__5: PP
5__5: FEP Teflon®
4-conductor, #22 AWG
(shielded)
Standard: 10' (3m)
Special order: 25'
(7.6m) or 50' (15.2m)
3/4" NPT (3/4" G / R)
Viton® (G version only)
General purpose
EN 61326 EMC
EN 61010-1 safety
(.012 to .91 mps)
(.3 to 27 mps)
Thermo-Flo Switch
_T10 - _ _ _ 5
Medium
F - Liquid
G - Gas
Sensor Material
1 - PP
5 - PVDF
Sensor Length
3 - Short
4 - Long
Mounting Thread
0 - 3/4" NPT
2 - 3/4" ISO
10’ Cable (3m)
10’ Cable (3m)
3/4" NPT (G 3/4")3/4" NPT (R 3/4")
0.7"
(19mm)
2.1"(54mm)
3/4" NPT (R 3/4")3/4" NPT (R 3/4")
0.7"
(19mm)
1.3"(32mm)
2.8"(71mm)
0.7"
(19mm)
4.5"(114mm)
3.0"(76mm)
Ambient Sensor Temperature (Cß)
Maximum T emperature/Volta ge
Derating @ Maximum Current
100
80
60
40
20
00
12 18 24 30 36
Acceptable
Operating Voltage (VDC)
Unacceptable
Range
Range
Flowline Electrical Loading Limits
1,400
1,200
1,000
800
600
400
200
0
Max. Series Resistance (Ohms)
Unacceptable
Range
Acceptable
Range
12 18 24 30 36
Supply Voltage (VDC)
Loading...