Flowline DX10 Specifications

EchoPod DX10 Ultrasonic Level Sensor (Voltage or Frequency)

®

Application

The general purpose ultrasonic level transmitter

provides continuous level measurement up to 49.2”

(1.25m) with a selectable 0-5 VDC, 0-10 VDC or 976­2000 Hz frequency signal output, and is congured
via our free WebCal software. Select the voltage
output for interface with analog input cards. Select
the frequency output for interface with discrete input
cards. This non-contact liquid level sensor is ideally
suited for corrosive, sticky or dirty liquids, and is
widely selected for small day tank, skid, IBC, sump

and process tank level applications.

®

Features

• Continuous non-contact level measurement up to

49.2” (1.25m)

• Selectable voltage or frequency (discrete) signal

outputs

• Conguration is fast and easy via WebCal software

and USB adapter

• Narrow 2” beam width and short 2” dead band

optimized for small tanks

• PVDF transducer and 6P polycarbonate enclosure for

corrosive liquids

• Automatic temperature compensation for accurate

measurement

Success

The disinfection of fresh

produce and associated
processing equipment is

essential to public health.
Fruits and vegetables such
as strawberries, head lettuce,
tomatoes, oranges and
artichokes are susceptible

to bacterial and viral

contamination. Each year,

approximately 40K Americans succumb to Hepatitis
A food poisoning. Adults who become ill miss an
average of 27 work days. Eleven percent of them are
hospitalized and 100 people die each year from acute
liver failure. Good Manufacturing Practices and new FDA
recommendations call for the disinfection of all fresh
produce and processing equipment. To accomplish this,

produce suppliers are deploying automated systems

that generate, inventory and inject chlorine dioxide
into their processes. These are typically small systems
that use 55-gal-drum or mini-bulk tanks for chemical
make up and storage. From inventory to data-logging,
level is critical in these highly corrosive applications.
EchoPod is the reliable, level measurement, switch
and control solution for chlorine disinfection systems.

Compatible Products

DataLoop™

Level Indicator

LI25

© 2016 Flowline Inc. • 10500 Humbolt Street Los Alamitos, CA 90720 • 562.598.3015 • www.owline.com • DS300200 REV C

DataView™

Level Controller

Commander™

Multi-Tank Level Controller

LI55 LI90

DataPoint™

Level Controller

LC52

EchoPod DX10 Ultrasonic Level Sensor (Voltage or Frequency)

EchoPod

Ordering Notes

1) Install the level sensor using Flowline
installation fittings or equivalents.

2) The level sensor is configured via our
WebCal software and one LI99-1001
Fob USB adapter. The level sensor is
offered with and without a Fob. Fobs
are universal and can be used to configure

®

®

Specications

Range: 49.2” (1.25m)

Accuracy: 0.125” (3mm)

Resolution: 0.019” (0.5mm)

Dead band: 2” (5cm)

Beam width: 2” (5cm)

Conguration: WebCal® PC

Windows® USB 2.0

Memory: Non-volatile

Supply voltage: 12-24 VDC

Consumption: 0.5W

Signal output: 0-5 V, 0-10 V, 976-2000 Hz

Frequency: Sink current, 15 mA nominal

Signal invert: 5-0 V, 10-0 V, 2000-976 Hz

Signal fail-safe: Full, empty or hold last

Process temp.: F: 20° to 140°

C: -7° to 60°

Temp. comp.: Automatic

Ambient temp.: F: -31° to 140°

C: -35° to 60°

Pressure: MWP = 30 PSI (2 bar)

Enclosure rating: Type 6P, encapsulated,

corrosion resistant &

submersible

Encl. material: Polycarbonate

Strain relief mat: Santoprene

Trans. material: PVDF

Cable jacket mat: Polyurethane

Cable type: 6-conductor, shielded

Cable length: 48” (1.2m)

Process mount: 1” NPT (1” G)

Mount gasket: Viton®

Classication: General purpose

Compliance: CE, RoHS

Approvals: cFMus

Dimensions

Conguration

LI99-1001

The level sensor is congurable via
our free WebCal PC software and
Fob USB adapter. The sensors are
offered with and without Fobs. Fobs

are universal and can be used to

congure any WebCal compatible

product.

Download your free copy of WebCal
in English or Chinese at
www.owline.com/webcal.php.

Fittings

For optimum performance, install the level sensor using the below
recommended or direct equivalent ttings.

P/N Description

LM52-1400 2” NPT x 1” NPT (Sch. 40)

LM52-1800 2” NPT x 1” NPT (Sch. 80)

LM52-1410 2” Socket x 1” NPT (Sch. 40)

LM52-1810 2” Socket x 1” NPT (Sch. 80)

LM52-1850 1” NPT Flange - 150# (Sch. 80)

LM50-1001-1 1” NPT Bracket, Polypropylene

Ordering

DX10-

Process mount (1)
0 NPT (US)
1 G (Metric)

Fob USB adapter (2)
0 Without Fob
1 With Fob

© 2016 Flowline Inc. • 10500 Humbolt Street Los Alamitos, CA 90720 • 562.598.3015 • www.owline.com • DS300200 REV C

Notes

1) Install the level sensor using Flowline
installation ttings or equivalents.

2) The level sensor is congured via our WebCal
software and one LI99-1001 Fob USB adapter.
The level sensor is offered with and without

a Fob. Fobs are universal and can be

used to congure any WebCal compatible
product. WebCal is a free download from our
website at www.owline.com/webcal.php.