floorex Beaver 250 Safety And Operators Manual & Parts Listing

Beaver 250

Safety and Operators Manual

&

Parts Listing

25-05-11

CAUTION: Read the instruction manual before using the appliance.

Effective Date 11-11-10

Beaver 250

1800 356 673 1. 1800 - FLOOREX

Notes

Machine Purchased:

Owner:

Beaver 250

FLOOREX- 1800 2. 1800 356 673

Table of Contents

Notes 1
Specifications 3
Safety instructions 4
Safety instructions 5
Electrical safety 6
Operating instructions 7
Operating instructions 8
Operating instructions 9
Floor Take-up Procedure. 10
Floor Take-up Procedure. 11
Problem solving 12
Parts Diagram Main 13
Parts List Main 14
Parts Diagram Handle 15
Parts List Handle 16
Wiring Diagram 17

This machine is designed to operate with the

wheels in contact with the floor at all times.

Do not operate with the wheels off the floor.

Beaver 250

1800 356 673 3. 1800 - FLOOREX

Specifications

Beaver 250

Weight

91kg

Dimensions

524 x 858 x 1114 (width x Height x Length)

Rated Voltage

240 Volt 50 Hz

Rated Watts

1500W

Max Blade Width

250mm

Beaver 250

FLOOREX- 1800 4. 1800 356 673

Safety instructions

1. Read and understand the instructions on the machine and in this manual
and engine manual (if applicable). Different models may have different
parts and controls.

2. Equipment should only be operated by trained personnel, in good
physical condition and mental health (not fatigued). The operator and
maintenance personnel must physically be able to handle the bulk weight
and power of this machine.

3. This is a one person machine. Maintain a safe operating distance to other
personnel. Remember „one machine, one operator‟.

4. This equipment is intended for commercial use.

5. For the operators‟ safety and the safety of others, always keep all guards
and shrouds in place.

6. Never start or run machine when unattended.

7. This machine is intended for use on horizontal floor surfaces only.

8. Never start or run machine with the handle folded.

9. Do not lend or rent machine without the operating instructions for the
machine (and the engine, if applicable).

10. Wear clothing suitable for the job and for the work place including, safety
shoes, hard hat, hearing protection, non-fogging vented safety goggles,
and dust mask suitable for dust and Safety Gloves when changing Blades
and accessories.

11. Keep body parts or any loose clothing away from moving parts. Failure to
comply could result in bodily injury.

Beaver 250

1800 356 673 5. 1800 - FLOOREX

Safety instructions

12. Do not modify machine in any way. Only use genuine BEAVER 250 parts
and accessories.

13. Repairs should be performed by qualified persons only.

14. Ensure parts have stopped moving and disconnect power or spark plug
when servicing or changing blades or accessories.

15. Never operate machine in rain or if heavy moisture is present.

16. Petrol is extremely flammable and poisonous. Petrol should only be
dispensed in well ventilated areas, and only when engine is cool.

17. WARNING! POISONOUS EXHAUST GASES. Do not operate petrol
powered equipment without adequate ventilation. Carbon monoxide is
and invisible odorless gas that can harm or can kill you.

18. Do not operate BEAVER 250 with any covers or doors removed or open.

19. The BEAVER 250 can produce sound pressure levels greater than 85db.
The operator must wear approved safety ear protection.

20. Do not allow the supply cord to come in contact with the cutting
blade/head or other moving parts of this machine.