Flonidan Gallus 2100 TCE Installation Manual
GALLUS 2100 TCE
Installation Guide
Please look at our homepage www.flonidan.dk that you have the
newest version of the document.
Gallus 2100 TCE
Installation guide
M/04110XX-000/1
Rev. 260505
FLONIDAN Ɣ ISLANDSVEJ 29 Ɣ DK-8700 HORSENS Ɣ TEL.: +45 75 61 88 88
WWW.FLONIDAN.DK
GALLUS 2100 TCE
Installation Guide
1.0 General
1.1 Introduction
Gallus 2100 TCE is an electronic, temperature compensated diaphragm meter,
available as mono or two pipes, from Q
2.5 to 6 m3/h.
max.
The meter is prepared for AMR - Automatic Meter Reading
Gallus 2100 will read out the accumulated consumption preferable as Nm3, Sm3,
kWh or MJ, as per choice depending on the customized configuration. Only one
reading is possible.
Display:
Alarm sign will be activated in case of error detected by the auto diagnostic system in the
electronics.
Page 2 of 4
Loading...