Flomatic CIN101 User Manual
by-p
m
pump
Cycle Gard® Model CI
Flomatic Corporation
Constant Pressure Pump Control
Model CI
Sizes: 1 ½” - NPT
2” - NPT
2” - Groove
3”-8” - 125# Flange
Applications
¾ Irrigation and Sprinkler Systems
¾ Booster Pump Systems
¾ Domestic Well Water Systems
¾ Municipal/Public Water Systems
Exclusive Cycle Gard® external adjustable
ass for optimu
control.
Features
• Maintains a constant downstream (outlet) pressure
• Adjustable by-pass (to lengthen or shorten pump shut down time)
• Strong Ductile Iron Valve Body construction
• Unleaded pilot control - California Prop 65 compliant (61< 5 marking)
• Diaphragm operated (No moving parts in valve body)
• Field Adjustable Pressure control
• Vertical or Horizontal installation
• Pressure ranges: “B” Range 25-175 p.s.i. and “D” Range 30-250 p.s.i.
• Connections : 3” thru 8” ANSI 150# Flange or 2” Groove
Product Cross
Reference Guide
FLOMATIC
CycleGard® CI
Cycle Stop
CSV3B
Product Specification
• Connection: Female NPT (Optional flanged & grooved)
• Max pressure: 225 PSI
• Max pressure differential: 125 PSI
• Max temperature: 180°F (80°C)
• NSF Approved Epoxy Powder
• Replaceable Seal
•
Jacuzzi Bros. RED JACKET Flexcon Ind.
Aqua Genie 400 Hydroservant Pressure Helper
Materials
Optional grooved connection
Valve Body: Ductile Iron A536
Elastomers: Reinforced Buna-N
Spring: Stainless steel
Fasteners: Stainless steel
Coating: NSF approved epoxy powder
Pilot: Un-Leaded Bronze 61<5 prop
65
Product Warranty: Flomatic three year control valve product warranty applies.
Danfoss Flomatic Corporation
15 Pruyn’s Island Drive, Glens Falls, New York 12801
Phone: 518-761-9797 Fax: 518-791-9798
www.flomatic.com
High Quality Valves Built to Last . . .
REV: 030510
Loading...