Flomatic C515 User Manual

Gate Valve Specification Submittal Sheet
Model NRS C-515 (2” - 12”) Ring-Type Flange (Push-On Flange)
FEATURES: Sizes: 2 ” 2 ½” 3” 4” 6”
8” 10” 12”
Max. working water pressure 250 PSI (1723 kPa) Max. working water temperature 140F (60C) Hydrostatic test pressure 400 PSI (2758 kPa) End connection Gasket end for IPS PVC O.D. pipe Optional hand wheel add “HW” to end of part # Opens Left turn
STANDARDS COMPLIANCE:
MATERIALS:
Valve Body & Ductile Iron ASTM A536 Gr 65-45-12 Covers Coating AWWA compliant C-550 & FDA Compliant (Inside & Out) Wedge Ductile Iron ASTM A536 Gr 65-45-12 With EPDM coating Elastomers EPDM FDA approved Fasteners Zinc plated steel ASTM A307 Grade B & 304 Stainless Steel Stem 420 Stainless Steel
APPLICATION:
Designed for installation on potable water lines, irrigation systems, waterworks connections and fire systems.
AWWA Compliant C-515
D
RING TYPE FLANGE (PUSH-ON FLANGE)
D1
A
ID
Size
Inch mm Inch mm Inch mm Inch mm Inch mm lbs kg
2 50 8560RT 10-1/4 260 11-1/2 290 2-3/8 60 2-1/2 64 24 11
2-1/2 65 8561RT 10-1/2 267 12-13/32 315 2-61/64 75 3 76 42 19
3 80 8562RT 12 305 16-5/8 346 3-9/64 80 3-5/8 92 44 20
4 100 8563RT 13-3/4 349 15-9/16 395 3-35/64 90 4-11/16 119 69 31
6 150 8564RT 16-29/32 429 20-29/64 520 4-33/64 115 6-3/4 171 119 54
8 200 8565RT 18-1/2 470 22-1/4 565 6-7/64 155 8-3/4 222 203 92
10 250 8566RT 21-1/4 540 24-11/32 618 7-3/32 180 10-29/32 277 278 126
12 300 8567RT 26-1/2 673 27-19/32 701 8-1/8 206 12-29/32 328 421 191
WARRANTY: Flomatic valves are guaranteed against defects of materials or workmanship when used for the services recommended.
If in any recommended service, a defect develops due to material or workmanship, and the device is returned, freight prepaid, to Flomatic Corporation within 12 months from the date of purchase, it will be repaired or replaced free of charge. Flomatic Corporations’ liability shall be limited to our agreement to repair or replace the valve only.
Part #
A D D1 ID WEIGHT
Flomatic Corporation
Flomatic Corporation, 15 Pruyn’s Island, Glens Falls, New York 12801
Phone: 518-761-9797 Fax: 518-761-9798 www.flomatic.com
Specification Sheet NRSPO-C515
Loading...