Flomatic 605E Shematics

¼ Turn Ball Valve Specification Submittal Sheet

Model 605E (½” - 2”)

FEATURES:
Sizes: □½” □¾” □1” □1½” □2”

Pressure rating 600 psi WOG(4137 kPa)
Temperature rating 350F (177C)
@ 50 psi (345 kPa)
End connection (FNPT) ANSI/ASME B1.20.1

OPTIONS:

(Added to end of part number)

□ E (Standard) FNPT x FNPT
□ UE Single Union (FNPT x FNPT)
□ SE Stainless Steel Handle

B

MATERIALS:

Body Unleaded Bronze C89833
Ball Chrome / Plated brass ASTM B16
Seats TFE teflon
Stems Brass ASTM B16
Stem packing TFE teflon
Thrust washer TFE teflon
Handle Electroless nickel plated
Handle Nut Electroless nickel plated

STANDARDS COMPLIANCE:

Complies with California Low Lead Plumbing Laws

IAPMO Certificate 6249
APPLICATION:

The Flomatic 605E ¼ Turn Ball Valves are
recommended for industrial, commercial & residential
applications. They are ideal for throttling & balancing
installations of low pressure steam, water, air & non­corrosive oil or gas.

D (NPT)

C TYP BOTH ENDS

UNION END

A

Size A A w/ Union B Weight

Inch mm

Part #

Inch mm Inch mm Inch mm
½ 15 5318E 2-13/32 61 N/A N/A 1-23/32 44 ½ ⅛ .4 .2
¾ 20 5310E 2-11/16 68 3-19/64 84 2-5/64 53 ¾ ⅛ .7 .3

1 25 5311E 3-11/64 81 4-7/64 104 2-15/32 63 1 ⅛ 1.3 .6

1½ 40 5313E 3-61/64 100 4-59/64 125 3-1/8 79 1½ ⅛ 3 1.4

2 50 5314E 4-1/2 114 5-1/4 133 3-7/16 87 2 ⅛ 5.2 2.4

WARRANTY: Flomatic valves are guaranteed against defects of materials or workmanship when used for the services recommended.

If in any recommended service, a defect develops due to material or workmanship, and the device is returned, freight prepaid, to
Flomatic Corporation within 12 months from the date of purchase, it will be repaired or replaced free of charge. Flomatic Corporations’
liability shall be limited to our agreement to repair or replace the valve only.

Flomatic Corporation

C

NPT

D

NPT

lbs kg

Flomatic Corporation, 15 Pruyn’s Island, Glens Falls, New York 12801

Phone: [phone] Fax: [phone] www.flomatic.com

December 6,2004 Rev. 4 (6/11)

Specification Sheet 605E