Flomatic 316SS User Manual

¼ Turn Ball Valve Specification Submittal Sheet

Model 316SS (½” - 2”)

FEATURES:
Sizes: □½” □¾” □1” □1½” □2”

Pressure rating 1000 psi WOG(4137 kPa)
Temperature rating 400F (204C)
Max Pressure 1000 psi (6895 kPa)
End connection (FNPT) ANSI/ASME B1.20.1

STANDARDS COMPLIANCE:

Complies with California Low Lead Plumbing Laws

NSF/ANSI 372

MATERIALS:

Body 316 Stainless Steel
Ball 316 Stainless Steel
Seats PTFE teflon
Stems 316 Stainless Steel
Stem packing PTFE teflon
Handle 316 Stainless Steel
Handle Nut 316 Stainless Steel

APPLICATION:

The Flomatic 316SS ¼ Turn Ball Valves are
recommended for industrial, commercial & residential
applications. They are ideal for throttling & balancing
installations of low pressure steam, water, air & non­corrosive oil or gas. Excellent choice for high pressure
potable water systems

Size

Inch mm Inch mm Inch mm Inch mm lbs kg

Part #

A B C

¼ 8 SSBV1000-02 2.13 54 2 51 2.5 64 ¼ .50 .23
⅜ 10 SSBV1000-03 2.13 54 2 51 2.5 64 ⅜ .50 .23
½ 15 SSBV1000-05 2.5 64 2.45 62 2.85 72 ½ .75 .34
¾ 20 SSBV1000-07 2.88 73 2.81 71 3.15 80 ¾ 1.15 .52

1 25 SSBV1000-10 3.43 87 3.28 89 3.70 94 1 1.95 .88
1¼ 32 SSBV1000-12 3.98 101 3.76 96 4.41 112 1¼ 2.80 1.27
1½ 40 SSBV1000-15 4.23 107 4.45 113 4.80 122 1½ 4.25 1.93

2 50 SSBV1000-20 4.84 123 5 127 5.31 135 2 6.40 2.90

WARRANTY: Flomatic valves are guaranteed against defects of materials or workmanship when used for the services recommended.

If in any recommended service, a defect develops due to material or workmanship, and the device is returned, freight prepaid, to
Flomatic Corporation within 12 months from the date of purchase, it will be repaired or replaced free of charge. Flomatic Corporations’
liability shall be limited to our agreement to repair or replace the valve only.

Flomatic Corporation

D

NPT

Weight

Flomatic Corporation, 15 Pruyn’s Island, Glens Falls, New York 12801

Phone: [phone] Fax: [phone] www.flomatic.com

June 25, 2013 Rev. 0 (6/13)

Specification Sheet 316 BALL