Flo-Master 65HR8 Instruction Manual

IF YOU HAVE ANY QUESTIONS OR CONCERNS, OR ARE MISSING PARTS
DO NOT RETURN TO THE STORE!
PLEASE CALL OUR CONSUMER HOTLINE AT 1-800-253-4642
INSTRUCTION MANUAL FOR 65HR8
Root-Lowell Manufacturing Company warrants to the original purchaser only that this product will continue to function as intended if used in accordance with the operating instructions (under NORMAL CONSUMER USE) for one year. If the product fails to function as intended--DO NOT RETURN IT TO THE STORE--call our CONSUMER SERVICE HOTLINE at 1-800-253-4642 (toll free) for fast service. We will, at our option, repair or replace any non-functioning parts without charge (shipping and handling charges will apply). Root-Lowell Manufacturing Company shall have the option of requiring the return of the non-functioning product together with the proof of purchase to establish a claim under this warranty. This warranty does not apply to damage resulting from accident, misuse, neglect, alterations, operation not in accordance with instructions, commercial use or normal wear.
ANY IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY AND FIT­NESS FOR CONSUMER USE, ARE LIMITED TO THE DURATION SPECIFIED ABOVE. ROOT-LOWELL MANUFACTURING COMPANY’S LIABILITY IS LIMITED SOLELY TO THE REPAIR OR REPLACEMENT OF THE NON-FUNCTIONING PRODUCT OR PART. ROOT-LOWELL MANUFACTURING COMPANY EXCLUDES LIABILITY UNDER THIS WARRANTY FOR ANY AND ALL INCIDENTAL AND CONSEQUENTIAL LOSS OR DAMAGE.
Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental consequential damages, so these limitations or exclusions may not apply to you. This warranty gives you specific legal rights and you may have other rights which vary from state to state.
INTRODUCTION
This hose reel has been manufactured from high quality materials and the most suitable components. The system winds the hose in automatically, using a spring drive. An automatic gripping mechanism allows the automatic winding system to be locked so that the length of unwound hose can be adjusted. An automatic alignment device ensures that the hose winds onto the reel correctly. The wall mounting bracket allows the hose reel to pivot 180 degrees for ease of use. The high-quality hose is capable of a high rate of flow at high pressure.
ATTENTION: BEFORE USE
PLEASE NOTE:
• The hose is NOT suited for drinkable water.
• Only factory trained professionals should attempt to open the cover on the hose reel.
• Please CAREFULLY read the instructions before use.
PARTS LIST
HOSE and REEL (1 each) SPRAY NOZZLE (1 each) MOUNTING BRACKET (1 each) METAL BRACKET PIVOT TUBE (1 each) EXPANSIVE BOLTS (set of 4)
TOOLS NEEDED FOR INSTALLATION
1. POWER DRILL 2. 1/2” MASONRY DRILL BIT 3. 1/2” SOCKET WRENCH
971-280
11/09
INSTALLATION
S
t
o
p
A
n
y
w
h
e
r
e
S
l
o
w
R
e
t
u
r
n
This Hose and Reel is suitable for installation close to a water supply. The distance from the faucet to the Hose and Reel can be extended by adding an additional length of hose.
When installed to a wall or post, follow these steps:
1. Attach the spray nozzle to longer, retractable hose.
2. Install mounting bracket to the wall or post as in FIG. 1. The wall mounting may be attached to a stone or brick wall. If attaching to a wood surface, lag bolts (not included) are needed. There are many alternative positions in which the equipment may be placed. The important thing is to locate the hose where it is most convenient for the user. The wall mounting has 4 holes, one each taking an expansive bolt. Each bolt must be fitted with a flexible washer or cushioning piece.
3. Connect the reel to the mounting bracket with the metal tube (pin).
4. Attach the brass connection on the leader hose to the faucet or water tap.
ADDITIONAL PRECAUTIONS WHEN USING THE HOSE AND REEL
The Hose and Reel comes with a high-quality, UV-protected, kink-resistant hose. After use, turn off the water supply, empty out the water remaining in the hose by opening the valve on the nozzle. Gently tug on the hose to begin retracting the hose onto the reel. In certain areas where the temperatures or water pressures are high, the sunlight may heat up the water and damage the hose, making the hose difficult to reel in. You are therefore advised always to reel in your hose after use. Do not leave the hose reel outdoors when temperatures are below 32 degrees. In such conditions, the hose may be less flexible and more difficult to reel in. The hose should never come in contact with chemicals or other substances such as acetone, mineral spirits, acids, etc. Please note that the
hose supplied with this hose reel should never be used for drinking water.
FIG. 1
Loading...
+ 1 hidden pages