Floe V2002LENGTH BUNKS, V2602 LENGTH BUNKS Assembly Instructions Manual

FLOE V2002/V2602 LENGTH BUNKS

INSTRUCTION P/N: 611

-

02710

-00

© Manufactured by:

BUNK/CRADLE PAD DISCLAIMER

TOOLS REQUIRED

*LIFT NOT INCLUDED

ASSEMBLY INSTRUCTIONS

KIT P/N 511-02710-00

-(2) 9/16” SOCKETS/
WRENCHES

-3/4” SOCKET

-TAPE MEASURE

-TORQUE WRENCH

-RECIPROCATING SAW OR
EQUIVALENT WITH METAL
BLADE (OPTIONAL, SEE SHEET
4 & 7)

DUE TO THE LARGE VARIETY OF BOAT HULL DESIGNS, WE STRONGLY

RECOMMEND THAT YOU CONSULT WITH YOUR BOAT’S MANUFACTURER TO

ENSURE THAT YOU ARE SUPPORTING YOUR BOAT PROPERLY TO AVOID ANY

RELEASED 3/27/19

POTENTIAL DAMAGE.

SHEET 1 OF 8

Floe International Inc.
48473 State Hwy. 65
McGregor, MN 55760
www.floeintl.com

BILL OF MATERIALS

P/N 511-0271-00 BUNK SYSTEM, V2002/V2602 COMPL

NUMBER PART NUMBER QTY. DESCRIPTION

1 001-70114-00 8 HHCS, 3/8-16 x 2 ¾” 18-8 ss
2 001-70115-00 16 HHCS, 3/8-16 x 3” 18-8 ss
3 001-70205-00 16 HHCS, ½-13 x 1” SS 18-8
4 001-71022-00 16 FLAT WASHER, ½” USS ss 18-8
5 001-76349-00 24 NUT, 3/8-16 ALUM
6 001-76350-00 16 NUT, ½-13 ALUM
7 002-03370-00 4 TUBE, V2002 BUNK SYTEM (10.5”)
8 002-03371-00 4 TUBE, V2002 BUNK SYTEM (21.5”)
9 111-00486-00 8 WELD’T, TUBE POCKET 2 HOLE

10 111-10011-00 4 ASS’Y, BUNK – 82”

EXPLODED VIEW

2X

2X

SHEET 2 OF 8

STEP 1

FIGURE 1.1

FIGURE 1.2

SLIDE CLAMP WELDMENTS OVER CRADLE BEAM (FIGURE 1.1). PLACE (2) ½” X 1” BOLTS AND (2) ½”
WASHERS INTO EACH CLAMP BRACKET (FIGURE 1.2)

8X

8X

SHEET 3 OF 8