Floe PONTOON CRADLE PADS Assembly Instructions Manual

FLOE PONTOON CRADLE PADS

INSTRUCTION P/N: 611

-

02490

-00

© Manufactured by:

BUNK/CRADLE PAD DISCLAIMER

TOOLS REQUIRED

*LIFT NOT INCLUDED

ASSEMBLY INSTRUCTIONS

KIT P/N 511-02490-00 (SMALL LIFTS), 511-02495-00 (LARGE LIFTS),
511-02498-00 (TRI-TOON ADD-ON, LARGE LIFTS)

-(2) 7/16” SOCKETS/
WRENCHES

-(2) 9/16” SOCKETS/
WRENCHES

-3/4” SOCKET

-TAPE MEASURE

-TORQUE WRENCH

DUE TO THE LARGE VARIETY OF BOAT HULL DESIGNS, WE STRONGLY

RECOMMEND THAT YOU CONSULT WITH YOUR BOAT’S MANUFACTURER TO

ENSURE THAT YOU ARE SUPPORTING YOUR BOAT PROPERLY TO AVOID ANY

RELEASED 4/19/19

POTENTIAL DAMAGE.

SHEET 1 OF 16

Floe International Inc.
48473 State Hwy. 65
McGregor, MN 55760
www.floeintl.com

BILL OF MATERIALS

P/N 511-02490-00 CRADLE PADS, PONTOON W/ GUIDE-INS SM

NUMBER PART NUMBER QTY. DESCRIPTION

1 001-70019-00 4 HHCS, ¼-20 x 4” 18-8 ss
2 001-70114-00 8 HHCS, 3/8-16 x 2 ¾” 18-8 ss
3 001-70115-00 24 HHCS, 3/8-16 x 3” 18-8 ss
4 001-70205-00 8 HHCS, ½-13 x 1” SS 18-8
5 001-75001-00 4 NUT, NYLOCK ¼-20 ALUM
6 001-76071-00 8 NUT, NYLOCK 3/8-16 ALUM.
7 001-76349-00 24 NUT, 3/8-16 ALUM.
8 001-76350-00 8 NUT, ½-13 ALUM.

9 002-04156-00 8 TUBE, PONTOON CRADLE PAD – 9”
10 002-04159-00 4 PIPE, PONTOON CRADLE PAD – 20.5”
11 111-00374-00 8 ASS’Y, PONTOON CRADLE PAD
12 111-00375-00 2 WELD’T, PONTOON GUIDE-IN SIDE A
13 111-00376-00 2 WELD’T, PONTOON GUIDE-IN SIDE B
14 111-00377-00 8 WELD’T, CLAMP POCKET PONTOON
15 511-02860-00 4 VERT. GUIDE-IN COVERS 18.5” GREY

EXPLODED VIEW

4X

SHEET 2 OF 16

BILL OF MATERIALS

P/N 511-02495-00 CRADLE PADS, PONTOON W/ GUIDE-INS LG

NUMBER PART NUMBER QTY. DESCRIPTION

1 001-70019-00 4 HHCS, ¼-20 x 4” 18-8 ss

2 001-70114-00 8 HHCS, 3/8-16 x 2 ¾” 18-8 ss

3 001-70119-00 24 HHCS, 3/8-16 x 4” 18-8 ss

4 001-70205-00 8 HHCS, ½-13 x 1” SS 18-8

5 001-75001-00 4 NUT, NYLOCK ¼-20 ALUM

6 001-76071-00 8 NUT, NYLOCK 3/8-16 ALUM.

7 001-76349-00 24 NUT, 3/8-16 ALUM.

8 001-76350-00 8 NUT, ½-13 ALUM.

9 002-04156-00 8 TUBE, PONTOON CRADLE PAD – 9”
10 002-04159-00 4 PIPE, PONTOON CRADLE PAD – 20.5”
11 002-04285-00 12 CLAMP, BUNK CRADLE (MALE)
12 111-00374-00 8 ASS’Y, PONTOON CRADLE PAD
13 111-00378-00 2 WELD’T, PONTOON GUIDE-IN SIDE A
14 111-00379-00 2 WELD’T, PONTOON GUIDE-IN SIDE B
15 111-00380-00 8 WELD’T, CLAMP POCKET - PONTOON
16 511-02860-00 4 VERT. GUIDE-IN COVERS 18.5” GREY

EXPLODED VIEW

4X

SHEET 3 OF 16

BILL OF MATERIALS

P/N 511-02498-00 CRADLE PADS, TRI-TOON ADD-ON LG.

NUMBER PART NUMBER QTY. DESCRIPTION

1 001-70114-00 4 HHCS, 3/8-16 x 2 ¾” 18-8 ss

2 001-70119-00 8 HHCS, 3/8-16 x 4” 18-8 ss

3 001-70205-00 4 HHCS, ½-13 x 1” SS 18-8

4 001-76071-00 4 NUT, NYLOCK 3/8-16 ALUM.

5 001-76349-00 8 NUT, 3/8-16 ALUM.

6 001-76350-00 4 NUT, ½-13 ALUM.

7 002-04156-00 4 TUBE, PONTOON CRADLE PAD – 9”

8 002-04285-00 4 CLAMP, BUNK CRADLE (MALE)

9 111-00374-00 4 ASS’Y, PONTOON CRADLE PAD
10 111-00380-00 4 WELD’T, CLAMP POCKET - PONTOON

EXPLODED VIEW

SHEET 4 OF 16

STEP 1

FIGURE 1.1

FIGURE 1.2

PLACE (1) 1/2” NUT AND (1) ½” X 1” BOLT INTO CLAMP POCKETS (FIGURE 1.1). SLIDE CLAMPS ONTO
CRADLE BEAM WITH POCKETS FACING OUTWARDS (FIGURE 1.2).

8X

8X

SHEET 5 OF 16