FLO-DYNAMICS AIRVAC Operation Manual

TABLE OF CONTENTS

INTRODUCTION to the AirVAC ............................................... 2

SAFETY INFORMATION ........................................................... 3

DIMENSIONS & SPECIFICATIONS ......................................... 5

UNIT OVERVIEW ....................................................................... 6

OPERATING PROCEDURE ...................................................... 7

REPLACEMENT PARTS ........................................................... 8

MAINTENANCE PROCEDURES .............................................. 9

CUSTOMER SERVICE CONTACT INFO ................................. 9

WARRANTY INFORMATION .................................................. 10

2

INTRODUCTION

to the Flo-Dynamics AirVAC

Congratulations on the purchase of your AirVAC handheld wet vac machine!
Simply put, this is the cleanest, easiest, fastest, most thorough, and most cost-

efficient method of cleani ng floor s, ever devised.
Using the AirVAC will save your shop thousands of dollars by elimin ating the use

of pellets and pads. Not to mention, it’s environmentally friendly. The AirVAC can
vacuum up all kinds of fluids, heavy weight gear oils, coolant, brake fluid even
grease when mixed with cleaning fluid.

NOT FOR USE WITH HIGHLY FLAMABLE LIQUIDS S UCH AS GASOLINE!

Please take time to read through this manual to familiarize yourself with the
AirVAC before performing using it.

IMPORTANT SAFETY NOTICE

For your safety, read this manual thoroughly before operating your AirVAC unit.
The safety messages presented below and throughou t this user’s manual are reminders to
the operator to exercise care when using this unit. Before using your AirVAC unit, always
refer to and follow the safety messages a nd applicable service procedures provided by the
manufacturer of the vehicle being serviced.

• Safety Symbols

A safety symbol, when present, gives a graphical description of the potential hazard, and
how to avoid the hazard:

Risk of Fire Read Instructions Before Use

Risk of Explosion Mandatory Eye Protection

Risk of Entanglement Mandatory Protective Gloves

Dangerous Fumes Mandatory Protective Clothing

Do Not Pull or Move

3

• Read All Safety Instruct ions

Read, understand and follow all safety messages and instructions in this manual. Safety
messages in this section of the manual contain a signal word with a three-part message
and, in some instances, an icon.

• Signal Words

The signal word indicates the level of the hazard in a situation:

Indicates an imminently hazardous situation which, if not avoided,

will result in death or serious injury to the operator or to bystanders.

Indicates a potentially hazardous situation which, if not avoided,

could result in death or serious inj ury to the operator or to bystanders.

Indicates a potentially hazardous situation which, if not avoided,

may result in moderate or minor injury to the operator or to bystanders.

Indicates a situation which, if not avoided, may result in damage

to the machine, or the vehicle being serviced.

• Safety Messages

Safety messages in this section contain three different type styles:

• Normal type states the hazard.

• Bold type states how to avoid the hazard.

• Italic type states the possible consequences of not avoiding the hazard.

IMPORTANT SAFETY INSTRUCTIONS

Engine exhaust contains toxic gases.

• Vent vehicle’s exhaust away from work area.

• Do not breathe exhaust.

Exhaust gases will cause injury or death.