FLIR Systems 73309-0102, 73413-0102 User manual

User’s manual
FLIR Ax5 series

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

Table of contents

1 Legal disclaimer....... ................................ ................................ ..... ......1

1.1 Legal disclaimer .........................................................................1

1.2 Usage statistics ..........................................................................1

1.3 Changes to registry .....................................................................1

1.4 U.S. Government Regulations........................................................1

1.5 Copyright ..................................................................................1

1.6 Quality assurance .......................................................................2

1.7 Patents.....................................................................................2

1.8 EULA Terms ..............................................................................2

2 Safety information ............................. ................................ .................. 4

3 Notice to user .... ........................... ..... ........................... ..... ..... ..... .......5

3.1 User-to-user forums .................................................................... 5

3.2 Calibration................................................................................. 5

3.3 Accuracy ..................................................................................5

3.4 Disposal of electronic waste .......................................................... 5

3.5 Training .................................................................................... 5

3.6 Documentation updates ...............................................................5

3.7 Important note about this manual.................................................... 5

3.8 Note about authoritative versions....................................................6

4 Customer help ... ........................... ..... ........................... ..... .................7

4.1 General .................................................................................... 7

4.2 Submitting a question .................................................................. 7

4.3 Downloads ................................................................................ 8

5 Introduction................... ..... ........................... ..... ................................ 9

6 System overview ............................... ..... ..... ..... ........................... ..... . 10

6.1 Figure .................................................................................... 10

6.2 Explanation ............................................................................. 10

7 Quick start guide ....................... ..... ........................... ..... ................... 11

8 List of accessories ........................ ..... ........................... ..... ............... 12

9 Mechanical installation . ........................... ..... ........................... ..... ..... 13

9.1 Table stand mounting................................................................. 14

9.1.1 Figure.......................................................................... 14

9.1.2 Explanation................................................................... 14

10 Focusing the camera ... ..... ........................... ..... ........................... ..... . 15

10.1 Focusing cameras with 5 to 19 mm lenses...................................... 15

10.1.1 Necessary tools ............................................................. 15

10.1.2 Procedure .................................................................... 15

10.2 Focusing cameras with 25 to 100 mm lenses .................................. 16

10.2.1 Necessary tools ............................................................. 16

10.2.2 Procedure .................................................................... 16

11 Downloads ........................... ..... ................................ ....................... 17

12 About I/O, synchronization, and measurement .............. ..... ..... ..... ..... .... 18

12.1 FLIR Ax5 General Purpose I/O..................................................... 18

12.2 FLIR Ax5 synchronization ........................................................... 18

12.3 FLIR Ax5 measurement.............................................................. 19

13 Technical data .................... ..... ........................... ..... .......................... 22

13.1 Online field-of-view calculator ...................................................... 22

13.2 Note about technical data ........................................................... 22

13.3 Note about authoritative versions.................................................. 22

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

v

Table of contents

13.4 FLIR A5 f=5 mm ....................................................................... 23

13.5 FLIR A5 f=9 mm ....................................................................... 27

13.6 FLIR A5 f=9 mm (7.5 Hz) ............................................................ 31

13.7 FLIR A5 f=5 mm (7.5 Hz) ............................................................ 35

13.8 FLIR A5 f=5 mm with SC kit (7.5 Hz) ............................................. 39

13.9 FLIR A15 f=9 mm...................................................................... 43

13.10 FLIR A15 f=9 mm with SC kit (7.5 Hz)............................................ 47

13.11 FLIR A15 f=9 mm (7.5 Hz) .......................................................... 51

13.12 FLIR A15 f=19 mm (7.5 Hz)......................................................... 55

13.13 FLIR A15 f=19 mm .................................................................... 59

13.14 FLIR A35 f=9 mm...................................................................... 63

13.15 FLIR A35 f=9 mm with SC kit ....................................................... 67

13.16 FLIR A35 f=19 mm .................................................................... 71

13.17 FLIR A35 FOV 13 (60 Hz, ver. 2016) ............................................. 75

13.18 FLIR A35 FOV 24 (60 Hz, ver. 2016) ............................................. 79

13.19 FLIR A35 FOV 48 (60 Hz, ver. 2016) ............................................. 83

13.20 FLIR A35 FOV 63 (60 Hz, ver. 2016) ............................................. 87

13.21 FLIR A35 FOV 7.6 (60 Hz, ver. 2016) ............................................ 91

13.22 FLIR A65 f=13 mm with SC kit (7.5 Hz) .......................................... 95

13.23 FLIR A65 f=25 mm .................................................................... 99

13.24 FLIR A65 f=13 mm .................................................................. 103

13.25 FLIR A65 f=13 mm (7.5 Hz)....................................................... 107

13.26 FLIR A65 f=25 mm (7.5 Hz)....................................................... 111

13.27 FLIR A65 FOV 90 (30 Hz, ver. 2016) ........................................... 115

13.28 FLIR A65 FOV 6.2 (30 Hz, ver. 2016) .......................................... 119

13.29 FLIR A65 FOV 45 (30 Hz, ver. 2016) ........................................... 123

13.30 FLIR A65 FOV 25 (30 Hz, ver. 2016) ........................................... 127

13.31 FLIR A65 FOV 12.4 (30 Hz, ver. 2016)......................................... 131

14 Mechanical drawings ................. ..... ........................... ..... ................. 135

15 CE Declaration of conformity ............................ ..... ........................... 150

16 Pin configurations and schematics.. ..... ........................... ..... ............. 152

16.1 M12 connector pin configuration ................................................ 152

16.2 Pig-tail end of cable................................................................. 153

16.3 SYNC input/output schematics .................................................. 153

16.4 GP input/output schematics ...................................................... 154

17 Cleaning the camera . ................................ ................................ ..... .. 155

17.1 Camera housing, cables, and other items..................................... 155

17.1.1 Liquids....................................................................... 155

17.1.2 Equipment.................................................................. 155

17.1.3 Procedure .................................................................. 155

17.2 Infrared lens .......................................................................... 155

17.2.1 Liquids....................................................................... 155

17.2.2 Equipment.................................................................. 155

17.2.3 Procedure .................................................................. 155

18 About FLIR Systems .. ........................... ..... ........................... ..... ...... 156

18.1 More than just an infrared camera .............................................. 157

18.2 Sharing our knowledge ............................................................ 157

18.3 Supporting our customers......................................................... 158

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

vi

Table of contents

19 Glossary .. ..... ........................... ..... ........................... ..... ................. 159

20 Thermographic measurement techniques .... ........................... ..... ...... 162

20.1 Introduction .......................................................................... 162

20.2 Emissivity.............................................................................. 162

20.2.1 Finding the emissivity of a sample.................................... 162

20.3 Reflected apparent temperature................................................. 166

20.4 Distance ............................................................................... 166

20.5 Relative humidity .................................................................... 166

20.6 Other parameters.................................................................... 166

21 History of infrared technology.................... ................................ ..... .. 167

22 Theory of thermography............................ ................................ ..... .. 170

22.1 Introduction ........................................................................... 170

22.2 The electromagnetic spectrum................................................... 170

22.3 Blackbody radiation................................................................. 170

22.3.1 Planck’s law ................................................................ 171

22.3.2 Wien’s displacement law................................................ 172

22.3.3 Stefan-Boltzmann's law ................................................. 173

22.3.4 Non-blackbody emitters ................................................. 174

22.4 Infrared semi-transparent materials............................................. 176

23 The measurement formula.... ........................... ..... ..... ..... ..... ............. 177

24 Emissivity tables ........................... ..... ........................... ..... ............. 181

24.1 References............................................................................ 181

24.2 Tables .................................................................................. 181

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

vii

1

Legal disclaimer

1.1 Legal disclaimer

All products manufactured by FLIR Systems are warranted against defective materials
and workmanship for a period of one (1) year from the delivery date of the original pur­chase, provided such products have been under normal storage, use and service, and in
accordance with FLIR Systems instruction.

Products which are not manufactured by FLIR Systems but included in systems delivered
by FLIR Systems to the original purchaser, carry the warranty, if any, of the particular sup­plier only. FLIR Systems has no responsibility whatsoever for such products.

The warranty extends only to the original purchaser and is not transferable. It is not appli­cable to any product which has been subjected to misuse, neglect, accident or abnormal
conditions of operation. Expendable parts are excluded from the warranty.

In the case of a defect in a product covered by this warranty the product must not be fur­ther used in order to prevent additional damage. The purchaser shall promptly report any
defect to FLIR Systems or this warranty will not apply.

FLIR Systems will, at its option, repair or replace any such defective product free of charge
if, upon inspection, it proves to be defective in material or workmanship and provided that
it is returned to FLIR Systems within the said one-year period.

FLIR Systems has no other obligation or liability for defects than those set forth above.
No other warranty is expressed or implied. FLIR Systems specifically disclaims the implied

warranties of merchantability and fitness for a particular purpose.
FLIR Systems shall not be liable for any direct, indirect, special, incidental or consequen-

tial loss or damage, whether based on contract, tort or any other legal theory.
This warranty shall be governed by Swedish law.
Any dispute, controversy or claim arising out of or in connection with this warranty, shall be

finally settled by arbitration in accordance with the Rules of the Arbitration Institute of the
Stockholm Chamber of Commerce. The place of arbitration shall be Stockholm. The lan­guage to be used in the arbitral proceedings shall be English.

1.2 Usage statistics

FLIR Systems reserves the right to gather anonymous usage statistics to help maintain
and improve the quality of our software and services.

1.3 Changes to registry

The registry entry HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa
\LmCompatibilityLevel will be automatically changed to level 2 if the FLIR Camera Monitor
service detects a FLIR camera connected to the computer with a USB cable. The modifi­cation will only be executed if the camera device implements a remote network service
that supports network logons.

1.4 U.S. Government Regulations

This product may be subject to U.S. Export Regulations. Please send any inquiries to

1.5 Copyright

© 2016, FLIR Systems, Inc. All rights reserved worldwide. No parts of the software includ­ing source code may be reproduced, transmitted, transcribed or translated into any

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

1

Legal disclaimer1

language or computer language in any form or by any means, electronic, magnetic, opti­cal, manual or otherwise, without the prior written permission of FLIR Systems.

The documentation must not, in whole or part, be copied, photocopied, reproduced, trans­lated or transmitted to any electronic medium or machine readable form without prior con­sent, in writing, from FLIR Systems.

Names and marks appearing on the products herein are either registered trademarks or
trademarks of FLIR Systems and/or its subsidiaries. All other trademarks, trade names or
company names referenced herein are used for identification only and are the property of
their respective owners.

1.6 Quality assurance

The Quality Management System under which these products are developed and manu­factured has been certified in accordance with the ISO 9001 standard.

FLIR Systems is committed to a policy of continuous development; therefore we reserve
the right to make changes and improvements on any of the products without prior notice.

1.7 Patents

One or several of the following patents and/or design patents may apply to the products
and/or features. Additional pending patents and/or pending design patents may also apply.

000279476-0001; 000439161; 000499579-0001; 000653423; 000726344; 000859020;
001106306-0001; 001707738; 001707746; 001707787; 001776519; 001954074;
002021543; 002058180; 002249953; 002531178; 0600574-8; 1144833; 1182246;
1182620; 1285345; 1299699; 1325808; 1336775; 1391114; 1402918; 1404291;
1411581; 1415075; 1421497; 1458284; 1678485; 1732314; 2106017; 2107799;
2381417; 3006596; 3006597; 466540; 483782; 484155; 4889913; 5177595; 60122153.2;

602004011681.5-08; 6707044; 68657; 7034300; 7110035; 7154093; 7157705; 7237946;
7312822; 7332716; 7336823; 7544944; 7667198; 7809258 B2; 7826736; 8,153,971;
8,823,803; 8,853,631; 8018649 B2; 8212210 B2; 8289372; 8354639 B2; 8384783;
8520970; 8565547; 8595689; 8599262; 8654239; 8680468; 8803093; D540838;
D549758; D579475; D584755; D599,392; D615,113; D664,580; D664,581; D665,004;
D665,440; D677298; D710,424 S; D718801; DI6702302-9; DI6903617-9; DI7002221-6;
DI7002891-5; DI7002892-3; DI7005799-0; DM/057692; DM/061609; EP 2115696 B1;
EP2315433; SE 0700240-5; US 8340414 B2; ZL 201330267619.5; ZL01823221.3;
ZL01823226.4; ZL02331553.9; ZL02331554.7; ZL200480034894.0; ZL200530120994.2;
ZL200610088759.5; ZL200630130114.4; ZL200730151141.4; ZL200730339504.7;
ZL200820105768.8; ZL200830128581.2; ZL200880105236.4; ZL200880105769.2;
ZL200930190061.9; ZL201030176127.1; ZL201030176130.3; ZL201030176157.2;
ZL201030595931.3; ZL201130442354.9; ZL201230471744.3; ZL201230620731.8.

1.8 EULATerms

• You have acquired a device (“INFRARED CAMERA”) that includes software licensed by
FLIR Systems AB from Microsoft Licensing, GP or its affiliates (“MS”). Those installed
software products of MS origin, as well as associated media, printed materials, and “on­line” or electronic documentation (“SOFTWARE”) are protected by international intellec­tual property laws and treaties. The SOFTWARE is licensed, not sold. All rights
reserved.

• IF YOU DO NOTAGREE TO THIS END USER LICENSE AGREEMENT (“EULA”), DO
NOT USE THE DEVICE OR COPY THE SOFTWARE. INSTEAD, PROMPTLY CON­TACT FLIR Systems AB FOR INSTRUCTIONS ON RETURN OF THE UNUSED DE­VICE(S) FOR A REFUND. ANY USE OF THE SOFTWARE, INCLUDING BUT NOT

LIMITED TO USE ON THE DEVICE, WILL CONSTITUTE YOUR AGREEMENT TO
THIS EULA (OR RATIFICATION OF ANY PREVIOUS CONSENT).

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

2

Legal disclaimer1

• GRANT OF SOFTWARE LICENSE. This EULA grants you the following license:
◦ You may use the SOFTWARE only on the DEVICE.

◦ NOT FAULT TOLERANT. THE SOFTWARE IS NOT FAULT TOLERANT. FLIR Sys-

tems AB HAS INDEPENDENTLY DETERMINED HOW TO USE THE SOFTWARE
IN THE DEVICE, AND MS HAS RELIED UPON FLIR Systems AB TO CONDUCT
SUFFICIENT TESTING TO DETERMINE THAT THE SOFTWARE IS SUITABLE
FOR SUCH USE.

◦ NO WARRANTIES FOR THE SOFTWARE. THE SOFTWARE is provided “AS IS”

and with all faults. THE ENTIRE RISK AS TO SATISFACTORY QUALITY, PER­FORMANCE, ACCURACY, AND EFFORT (INCLUDING LACK OF NEGLIGENCE)
IS WITH YOU. ALSO, THERE IS NO WARRANTY AGAINST INTERFERENCE
WITH YOUR ENJOYMENT OF THE SOFTWARE OR AGAINST INFRINGEMENT.

IF YOU HAVE RECEIVED ANY WARRANTIES REGARDING THE DEVICE OR
THE SOFTWARE, THOSE WARRANTIES DO NOT ORIGINATE FROM, AND ARE
NOT BINDING ON, MS.

◦ No Liability for Certain Damages. EXCEPT AS PROHIBITED BY LAW, MS SHALL

HAVE NO LIABILITY FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL OR IN­CIDENTAL DAMAGES ARISING FROM OR IN CONNECTION WITH THE USE
OR PERFORMANCE OF THE SOFTWARE. THIS LIMITATION SHALL APPLY
EVEN IF ANY REMEDY FAILS OF ITS ESSENTIAL PURPOSE. IN NO EVENT
SHALL MS BE LIABLE FOR ANY AMOUNT IN EXCESS OF U.S. TWO HUNDRED
FIFTY DOLLARS (U.S.$250.00).

◦ Limitations on Reverse Engineering, Decompilation, and Disassembly. You

may not reverse engineer, decompile, or disassemble the SOFTWARE, except and
only to the extent that such activity is expressly permitted by applicable law notwith­standing this limitation.

◦ SOFTWARE TRANSFER ALLOWED BUT WITH RESTRICTIONS. You may perma-

nently transfer rights under this EULA only as part of a permanent sale or transfer of
the Device, and only if the recipient agrees to this EULA. If the SOFTWARE is an up­grade, any transfer must also include all prior versions of the SOFTWARE.

◦ EXPORT RESTRICTIONS. You acknowledge that SOFTWARE is subject to U.S. ex-

port jurisdiction. You agree to comply with all applicable international and national
laws that apply to the SOFTWARE, including the U.S. Export Administration Regula­tions, as well as end-user, end-use and destination restrictions issued by U.S. and
other governments.

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

3

2

Safety information

WARNING

Make sure that you read all applicable MSDS (Material Safety Data Sheets) and warning labels on con­tainers before you use a liquid. The liquids can be dangerous. Injury to persons can occur.

WARNING

Applicability: FLIR Ax5.

Do not use screws that are too long. If you use screws that are too long, damage to the camera will occur.
The maximum depth of the M3 holes is 4 mm (0.15 in.).

CAUTION

Do not point the infrared camera (with or without the lens cover) at strong energy sources, for example,
devices that cause laser radiation, or the sun. This can have an unwanted effect on the accuracy of the
camera. It can also cause damage to the detector in the camera.

CAUTION

Do not use the camera in temperatures more than +50°C (+122°F), unless other information is specified
in the user documentation or technical data. High temperatures can cause damage to the camera.

CAUTION

Do not apply solvents or equivalent liquids to the camera, the cables, or other items. Damage to the bat­tery and injury to persons can occur.

CAUTION

Be careful when you clean the infrared lens. The lens has an anti-reflective coating which is easily dam­aged. Damage to the infrared lens can occur.

CAUTION

Do not use too much force to clean the infrared lens. This can cause damage to the anti-reflective
coating.

CAUTION

Applicability: Cameras with an automatic shutter that can be disabled.

Do not disable the automatic shutter in the camera for a long time period (a maximum of 30 minutes is
typical). If you disable the shutter for a longer time period, damage to the detector can occur.

NOTE

The encapsulation rating is only applicable when all the openings on the camera are sealed with their cor­rect covers, hatches, or caps. This includes the compartments for data storage, batteries, and
connectors.

CAUTION

Applicability: Cameras where you can remove the lens and expose the infrared detector.

Do not use the pressurized air from the pneumatic air systems in a workshop when you remove dust from
the detector. The air contains oil mist to lubricate the pneumatic tools and the pressure is too high. Dam­age to the detector can occur.

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

4

3

Notice to user

3.1 User-to-user forums

Exchange ideas, problems, and infrared solutions with fellow thermographers around the
world in our user-to-user forums. To go to the forums, visit:

3.2 Calibration

FLIR Systems recommends that you verify your calibration yearly. You can verify the cali­bration yourself or with the help of a FLIR Systems Partner. If preferred, FLIR Systems of­fers a calibration, adjustment, and general maintenance service.

3.3 Accuracy

For very accurate results, we recommend that you wait 5 minutes after you have started
the camera before measuring a temperature.

3.4 Disposal of electronic waste

As with most electronic products, this equipment must be disposed of in an environmen­tally friendly way, and in accordance with existing regulations for electronic waste.

Please contact your FLIR Systems representative for more details.

3.6 Documentation updates

Our manuals are updated several times per year, and we also issue product-critical notifi­cations of changes on a regular basis.

To access the latest manuals and notifications, go to the Download tab at:

It only takes a few minutes to register online. In the download area you will also find the lat­est releases of manuals for our other products, as well as manuals for our historical and
obsolete products.

3.7 Important note about this manual

FLIR Systems issues generic manuals that cover several cameras within a model line.
This means that this manual may contain descriptions and explanations that do not apply

to your particular camera model.

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

5

Notice to user3

3.8 Note about authoritative versions

The authoritative version of this publication is English. In the event of divergences due to
translation errors, the English text has precedence.

Any late changes are first implemented in English.

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

6

4

Customer help

4.2 Submitting a question

To submit a question to the customer help team, you must be a registered user. It only
takes a few minutes to register online. If you only want to search the knowledgebase for
existing questions and answers, you do not need to be a registered user.

When you want to submit a question, make sure that you have the following information to
hand:

• The camera model

• The camera serial number

• The communication protocol, or method, between the camera and your device (for ex­ample, HDMI, Ethernet, USB, or FireWire)

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

7

4

Customer help

• Device type (PC/Mac/iPhone/iPad/Android device, etc.)

• Version of any programs from FLIR Systems

• Full name, publication number, and revision number of the manual

4.3 Downloads

On the customer help site you can also download the following, when applicable for the
product:

• Firmware updates for your infrared camera.

• Program updates for your PC/Mac software.

• Freeware and evaluation versions of PC/Mac software.

• User documentation for current, obsolete, and historical products.

• Mechanical drawings (in *.dxf and *.pdf format).

• Cad data models (in *.stp format).

• Application stories.

• Technical datasheets.

• Product catalogs.

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

8

5

Introduction

The FLIR Ax5 cameras have features and functions that make them the natural choice for
anyone who uses PC software to solve problems. Available resolutions include 80 × 64,
160 × 128, and 320 × 256 pixels.

Among their main features are GigE Vision and GenICam compliance, which makes them
plug-and-play when used with software packages such as IMAQ Vision and Halcon.

Key features:

• Very affordable.

• Compact (40 × 43 × 106 mm/1.57 × 1.69 × 4.17 in.).

• GigE Vision and GenICam compliant.

• GigE Vision lockable connector.

• PoE (power over Ethernet).

• 8-bit monochrome image streaming.

• 14-bit radiometric image streaming.

• High frame rates (60 Hz).

• Synchronization between cameras possible.

• 1x+1x GPIO.

• Compliant with any software that supports GenICam, including National Instruments
IMAQ Vision, Stemmers Common Vision Blox, and COGNEX Vision Pro.

• Lenses: 5°, 9°, 13°, 19°, and 25° (model-dependent).

Typical applications:

• Automation, thermal machine vision.

• Entry-level “high-speed” R&D.

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

9

6

System overview

6.1 Figure

6.2 Explanation

1. Pin configuration in M12 connector. For more information, see section 16.1 M12 con-

nector pin configuration, page 152.

2. 4x M3 threaded holes.

3. Cable M12 pigtail or Cable M12 sync.

4. Ethernet cable CAT6, 2 m/6.6 ft.

5. PoE injector.

6. Cable kit mains.

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

10

7

Quick start guide

Follow this procedure:

1. Download FLIR GEV Demo from

2. Install FLIR GEV Demo.

3. Connect the camera to power and to the computer, typically via a PoE injector con-

nected to the Ethernet cable.

4. Start FLIR GEV Demo.

5. In FLIR GEV Demo, click the Select/Connect button.

6. In the GEV Device Selection window, identify the camera using the MAC address

(printed on the camera). Select the camera in the list and click the OK button.

7. If the device is not visible, check the box “Show unreachable Network Devices” and

then select the correct device and press "Set IP Address…”. Then assign the correct
IP address to your device.

8. FLIR GEV Demo can now be used to set up and control the camera. Click the Play but-

ton to start the image stream.

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

11

8

List of accessories

Product name Part number

Base support T198349

Cable kit Mains (UK,EU,US)

Cable M12 Pigtail T127605ACC

Cable M12 Sync T127606ACC

Ethernet cable CAT6, 2 m/6.6 ft. T951004ACC

FLIR IR Camera Player DSW-10000

FLIR Tools T198584
FLIR Tools+ (download card incl. license key) T198583

Focus adjustment tool T198342ACC

Gigabit PoE injector 16 W, with multi-plugs T911183

Table stand kit T198392
Transport case Ax5

Note FLIR Systems reserves the right to discontinue models, parts or accessories, and
other items, or to change specifications at any time without prior notice.

T198348

T198594ACC

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

12

9

Mechanical installation

The camera unit has been designed to allow it to be mounted in any position. It has a
mounting interface on the bottom with four metric M3 holes.

WARNING

Do not use screws that are too long. Using screws that are too long will damage the camera. The maxi­mum depth of the M3 holes is 4 mm (0.15 in.).

Note The camera generates a considerable amount of heat during operation. This is
normal. In order to transfer this heat, it is recommended that the camera is mounted on a
base support or a heat sink made of a material that has a high capacity to transfer heat, e.
g., aluminum. FLIR Systems provides P/N T198349 (base support) for this purpose, but
other base supports or heat sinks can be used.
The use of the base support is also strongly recommended in order to minimize tempera­ture drift of the infrared detector in the camera.

If the camera unit is to be permanently mounted on the application site, certain steps have
to be taken. The camera unit might need to be enclosed in a protective housing and, de­pending on the ambient conditions (e.g., temperature), the housing may need to be cooled
by means of water or air. In very dusty conditions the installation might also need to have a
stream of pressurized air directed at the lens, in order to prevent dust build-up.

When mounting the camera unit in harsh environments, every precaution should be taken
when it comes to securing the unit. If the environment exposes the unit to severe vibra­tions, there may arise a need to secure the mounting screws by means of Loctite or anoth­er industrial brand of thread-locking liquid, as well as to dampen the vibrations by
mounting the camera unit on a specially designed mounting base.

For further information regarding mounting recommendations and environmental enclo­sures, contact FLIR Systems.

The camera is typically powered using PoE (Power over Ethernet). A PoE injector and ca­ble kit are available from FLIR Systems. See the part numbers below.

• T198348, Cable kit mains (UK, EU, US).

• T911112, PoE injector.

• T951004ACC, Ethernet cable CAT-6, 2 m/6.6 ft.

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

13

Mechanical installation9

9.1 Table stand mounting

9.1.1 Figure

9.1.2 Explanation

1. Base support.

2. Table stand.

3. Gooseneck.

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

14

10

Focusing the camera

10.1 Focusing cameras with 5 to 19 mm lenses

10.1.1 Necessary tools

Focus adjustment tool (included in the package for cameras with 5 to 19 mm lenses).

10.1.2 Procedure

Follow this procedure:

1. Note the four pegs on the inside of the focus adjustment tool.

2. Align the four pegs with the corresponding slots on the front of the lens, and push the

focus adjustment tool into position.

3. Rotate the lens.

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

15

Focusing the camera10

10.2 Focusing cameras with 25 to 100 mm lenses

CAUTION

Do not use the focus adjustment tool when focusing cameras with 25 to 100 mm lenses.

10.2.1 Necessary tools

Allen wrench, 1.5 mm.

10.2.2 Procedure

Follow this procedure:

1. Unlock the clamp by loosening the Allen screw.

2. Focus the camera by rotating the lens.

3. Lock the clamp by tightening the Allen screw.

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

16

11

Downloads

The principal software used to configure and control the camera is FLIR GEV Demo 1.3.0.
This software is based on the PleoraeBus SDK and the runtime Pleora GEVPlayer that
comes with the SDK.

Downloads:

•

• Link to download PureGEV SDK Sample (source code):
SwDownload/app/RssSWDownload.aspx?ID=133

• Link to download FLIR GEV Demo 1.3.0 (installer):

The camera is compliant with the following standards. Additional software and documenta­tion resources can be downloaded from these sites.

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

17

12

About I/O, synchronization, and measurement

12.1 FLIR Ax5 General Purpose I/O

The FLIR Ax5 camera has one general-purpose input line and one output line that can be
used in control applications.

Typical usage:

• The output line is asserted when an alarm condition is met.

• The input line is used to trigger an action, for example saving an image.

The output line GPO+ is controlled by the register UserOutputValue. Set this register to
True to assert (level equal to GPIO_PWR) the GPO+ signal, and set to False to de-assert
(level is equal to GPIO_GND).

You can monitor the input line by reading the LineStatus register on a regular basis. The
LineStatus register will returnTrue if the input level is asserted (level equal to GPIO_PWR
voltage), and it will returnFalse if the input line is de-asserted (level is equal to GPIO_
GND).

Another option is to configure the camera to send a GigEVision event when the input line
state is changed. In order to configure the camera for event transmission you need to
modify the following registers:

PLC_Q7_Variable0

EventSelector

EventNotification Enum Set this register to GigEVisionE-

Enum

Enum

Set this register to PLC_I0 (enu­meration value 2) to route the
GPI signal

Set this register to PLC_Inter­rupt_FIFO0_Q7 (enumeration
value 5)

vent (enumeration value 3)

To de-bounce the input signal you also might want to configure the LineDebounceFactor
register. This register controls the width of the window during which spurious transitions
from the input line are filtered out (in increments of ~480 ns). This register is 0 by default,
which means that the de-bouncing is disabled. The maximum value for this register is
65535, which corresponds to a maximum holding time of ~31 ms.

The FLIR GEV Demo 1.3 sample illustrates how to setup the event transmission. C++
source code is available in PureGEV SDK Sample.

Applicable downloads:

• Link to download PureGEV SDK Sample (source code):
SwDownload/app/RssSWDownload.aspx?ID=133

• Link to download FLIR GEV Demo 1.3.0 (installer):

12.2 FLIR Ax5 synchronization

The camera provides an external sync channel that can be used to synchronize the frame
start between two cameras, one configured as the master and the other configured as the
slave. It can also be used to synchronize the frame start of a camera with that of another
product.

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

18

12

About I/O, synchronization, and measurement

Figure 12.1 Master/slave synchronization between two FLIR Ax5 cameras (NTSC).

Note External synchronization can be applied but only by using an input signal with a fre-

quency of 29.97 Hz (NTSC).

• The signal voltage (relative to digital GND) is 3.3 V.

• The pulse width (minimum) is 100 ns (will be extended to 1 μs).

Note that the synchronization mode is not persistent. The camera will always return to
SyncMode Disabled after reset or power cycling.

For slow configurations (9 Hz), the output frame rate is a fraction of the sync pulse rate.
Because there is ambiguity as to which received pulse triggers the frame timing, FLIR
does not recommend using the external sync interface with a slow-configured camera.

Note The only difference between ExtSyncMaster and SelfSyncSlave mode is that the
incoming sync signal is relayed to the SYNC_OUT port if set to ExtSyncMaster.

12.3 FLIR Ax5 measurement

The FLIR Ax5 camera has an option to output 14-bit digital video that is temperature linear.
Each count in the temperature-linear video corresponds to either 0.04 K or 0.4 K in 14-bit

video, depending on the selected resolution.
Temperature-linear output is enabled or disabled with the feature register:
TemperatureLinearMode: On (1) or Off (0)
Temparture-linear resolution is determined with the feature register:
TemperatureLinearResolution: Low 0.4 K (0) or High 0.04 K (1)
If TemperatureLinearMode is On, the signal-to-temperature mapping is calculated using

the equations

S corresponds to the 14-bit pixel value.
If the TemperatureLinearMode is Off, then the camera provides registers that can be

used to convert signal values to temperature. For each measurement range (or gain
mode) there is a set of register values that is used for this conversion.

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

19

12

About I/O, synchronization, and measurement

The conversion from the corrected signal S to the temperature T

is performed using the

[K]

external RBFO values for the selected lens and gain mode. The signal-to-temperature
mapping is calculated using the equation

ln(x) is the base-e logarithm of the x parameter, and S corresponds to the 14-bit pixel
value.

Register name Type

R Integer

B Float
F Float
O Float (handles only positive vales)

OInt Integer (same as O but handles negative values)

Please note that these registers will be automatically updated when switching between the
high gain mode and the low gain mode.

The FLIR GEV Demo sample illustrates how to use this conversion formula.
You also have the option to do your own one-point calibration by adjusting the offset value

(register OInt) by pointing the camera at an accurately known temperature. Knowing the
temperature, you can then calculate the offset value and update the OInt register.

The FLIR GEV Demo sample illustrates how to perform this kind of calibration. Please note
that you will need to save the current settings if you want the new offset value to be persis­tent. Use the command register SensorSetDefaults to set all current settings as power
on defaults.

There are additional registers that also affect the temperature linear output. These regis­ters are grouped together as Object Parameter registers. These registers only affect the
transformation of detector signal values to temperature values when the camera is in tem­perature linear mode.

ReflectedTemperature: The estimated reflected background temperature for the target
scene.

ObjectEmissivity: The target scene emissivity factor. The default value is 1.0.
WindowTransmission: The estimated transmission factor for the protective window. The

default value is 1.0.
WindowTemperature: The external window temperature T

(in kelvin).

win

AtmosphericTransmission: The estimated transmission factor for the atmosphere be­tween the camera and the scene.

AtmosphericTemperature: The estimated temperature T

for the atmosphere between

atm

the camera and the scene.
The correction for scene parameters is extended to include the following parameters:

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

20

12

About I/O, synchronization, and measurement

Figure 12.2 1: Scene, T

dow, T

; 5: Infrared camera.

win

; 2: Reflected background temperature; 3: Atmosphere, T

scene

; 4: External win-

Atm

Note The default values for the object parameters are set to values that will have no im­pact on the conversion between detector signal values and corrected signal values.

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

21

13

Technical data

13.1 Online field-of-view calculator

Please visit and click the photo of the camera series for field-of-view
tables for all lens–camera combinations.

13.2 Note about technical data

FLIR Systems reserves the right to change specifications at any time without prior notice.
Please check for latest changes.

13.3 Note about authoritative versions

The authoritative version of this publication is English. In the event of divergences due to
translation errors, the English text has precedence.

Any late changes are first implemented in English.

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

22

Technical data13

13.4 FLIR A5 f=5 mm

P/N: 62205-0101
Rev.: 35207

General description

The FLIR A5 has features and functions that make it the natural choice for anyone who uses PC software
to solve problems and for whom 80 × 64 pixel resolution is sufficient.

Among its main features are GigE Vision and GenICam compliance, which makes it plug-and-play when
used with software packages such as IMAQ Vision and Halcon.

Key features:

• Very affordable.

• Compact (40 mm × 43 mm × 106 mm).

• GigE Vision and GenICam compliant.

• GigE Vision lockable connector.

• PoE (power over Ethernet).

• 8-bit 80 × 64 pixel images streamed at 60 Hz, signal linear.

• 14-bit 80 × 64 pixel images streamed at 60 Hz, signal and temperature linear.

• High frame rates (60 Hz).

• Synchronization between cameras possible.

• 1x+1x GPIO.

• Compliant with any software that supports GenICam, including National Instruments IMAQ Vision,
Stemmers Common Vision Blox, and COGNEX Vision Pro.

Typical applications:

• Automation and thermal machine vision.

• Entry level “high-speed” R&D.

Imaging and optical data

IR resolution 80 × 64 pixels

Thermal sensitivity/NETD < 0.05°C @ +30°C (+86°F) / 50 mK

Field of view (FOV)

Focal length 5 mm (0.20 in.)

Spatial resolution (IFOV) 10.0 mrad

F-number 1.25
Image frequency 60 Hz

Focus Fixed

Detector data

Detector type Focal plane array (FPA), uncooled VOX

Spectral range

Detector pitch 50 µm

Detector time constant Typical 12 ms

Measurement

Object temperature range

Accuracy

44° × 36°

microbolometer

7.5–13 µm

• –25 to +135°C (–13 to 275°F)

• –40 to +550°C (–40 to +1022°F)

±5°C (±9°F) or ±5% of reading

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

23

Technical data13

Measurement analysis

Atmospheric transmission correction Automatic, based on inputs for distance, atmos-

Optics transmission correction Automatic, based on signals from internal sensors

Emissivity correction Variable from 0.5 to 1.0

Reflected apparent temperature correction Automatic, based on input of reflected temperature

External optics/windows correction Automatic, based on input of optics/window trans-

Measurement corrections Global object parameters

Ethernet

Ethernet

Ethernet, type

Ethernet, standard IEEE 802.3

Ethernet, connector type RJ-45

Ethernet, communication GigE Vision ver. 1.2

Ethernet, image streaming 8-bit monochrome @ 60 Hz

Ethernet, power Power over Ethernet, PoE IEEE 802.3af class 0

Ethernet, protocols

pheric temperature and relative humidity

mission and temperature

Control and image

Gigabit Ethernet

Client API GenICam compliant

• Signal linear/ DDE

• Automatic/ Manual

• Flip H&V
14-bit 80 × 64 pixels @ 60 Hz

• Signal linear/ DDE

• Temperature linear
GigE Vision and GenICam compatible

Power
TCP, UDP, ICMP, IGMP, DHCP, GigEVision

Digital input/output

Digital input, purpose

Digital input

Digital output, purpose

Digital output

Digital I/O, isolation voltage 500 VRMS

Digital I/O, supply voltage 2–40 VDC, max. 200 mA

Digital I/O, connector type 12-pole M12 connector (shared with Digital syn-

Synchronization in, purpose

Synchronization in

Synchronization in, type LVC Buffer @3.3V, “0” <0.8 V, “1”>2.0 V.

Synchronization out, purpose

Synchronization out

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

General purpose

1× opto-isolated, “0” <2, “1” = 2–12 VDC.

General purpose output to ext. device (program­matically set)

1× opto-isolated, 2–40 VDC, max. 185 mA

chronization and External power)

Frame synchronization in to control camera

1×, non-isolated

Frame synchronization out to control another FLIR
Ax5 camera

1×, non-isolated

24

Technical data13

Digital input/output

Synchronization out, type LVC Buffer @ 3.3V, ”0”=24 MA max, “1”= –24 mA

Digital synchronization, connector type 12-pole M12 connector (shared with Digital I/O

Power system

External power operation 12/24 VDC, < 3.5 W nominal < 6.0 W absolute max.

External power, connector type

Voltage Allowed range 10–30 VDC

Environmental data

Operating temperature range –15°C to +50°C (+5°F to +122°F)

max.

and External power)

12-pole M12 connector (shared with Digital I/O
and Digital Synchronization )

NOTE

The operating temperature range assumes that
the camera is mounted on the base support (in­cluded in the package) or a similar type of
heatsink.

Storage temperature range –40°C to +70°C (–40°F to +158°F)

Humidity (operating and storage) IEC 60068-2-30/24 h 95% relative humidity +25°C

EMC

Encapsulation IP 40 (IEC 60529) with base support mounted

Shock 25 g (IEC 60068-2-27)

Vibration

Physical data

Weight 0.200 kg (0.44 lb.)

Camera size (L × W × H) 106 × 40 × 43 mm (4.2 × 1.6 × 1.7 in.)

Tripod mounting UNC ¼"-20 (on three sides)

Base mounting 4 × M3 thread mounting holes (bottom)

Housing material Magnesium and aluminum

Shipping information

Packaging, type Cardboard box

List of contents

Packaging, weight

Packaging, size 295 × 200 × 105 mm (11.6 × 7.9 × 4.1 in.)

EAN-13 7332558003930

to +40°C (+77°F to +104°F)

• EN 61000-6-2 (Immunity)

• EN 61000-6-3 (Emission)

• FCC 47 CFR Part 15 Class B (Emission)

2 g (IEC 60068-2-6)

• Infrared camera with lens

• Base support

• Focus adjustment tool

• Printed documentation

4743254000636 (Estonia plant)

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

25

Technical data13

Shipping information

UPC-12
Country of origin Sweden

845188003586

Supplies & accessories:

• T951004ACC; Ethernet cable CAT6, 2 m/6.6 ft.

• T198349; Base support

• T198348; Cable kit Mains (UK,EU,US)

• T198392; Table stand kit

• T911183; Gigabit PoE injector 16 W, with multi-plugs

• T127605ACC; Cable M12 Pigtail

• T127606ACC; Cable M12 Sync

• T198342ACC; Focus adjustment tool

• T198594ACC; Transport case Ax5

• T199356; FLIR Ax5 accessory starter kit

• T198584; FLIR Tools

• T198583; FLIR Tools+ (download card incl. license key)

• DSW-10000; FLIR IR Camera Player

• T199233; FLIR Atlas SDK for .NET

• T199234; FLIR Atlas SDK for MATLAB

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

26

Technical data13

13.5 FLIR A5 f=9 mm

P/N: 62209-0101
Rev.: 35207

General description

The FLIR A5 has features and functions that make it the natural choice for anyone who uses PC software
to solve problems and for whom 80 × 64 pixel resolution is sufficient.

Among its main features are GigE Vision and GenICam compliance, which makes it plug-and-play when
used with software packages such as IMAQ Vision and Halcon.

Key features:

• Very affordable.

• Compact (40 mm × 43 mm × 106 mm).

• GigE Vision and GenICam compliant.

• GigE Vision lockable connector.

• PoE (power over Ethernet).

• 8-bit 80 × 64 pixel images streamed at 60 Hz, signal linear.

• 14-bit 80 × 64 pixel images streamed at 60 Hz, signal and temperature linear.

• High frame rates (60 Hz).

• Synchronization between cameras possible.

• 1x+1x GPIO.

• Compliant with any software that supports GenICam, including National Instruments IMAQ Vision,
Stemmers Common Vision Blox, and COGNEX Vision Pro.

Typical applications:

• Automation and thermal machine vision.

• Entry level “high-speed” R&D.

Imaging and optical data

IR resolution 80 × 64 pixels

Thermal sensitivity/NETD < 0.05°C @ +30°C (+86°F) / 50 mK

Field of view (FOV)

Focal length 9 mm (0.35 in.)

Spatial resolution (IFOV) 5.56 mrad

F-number 1.25
Image frequency 60 Hz

Focus Fixed

Detector data

Detector type Focal plane array (FPA), uncooled VOX

Spectral range

Detector pitch 50 µm

Detector time constant Typical 12 ms

Measurement

Object temperature range

Accuracy

25° × 20°

microbolometer

7.5–13 µm

• –25 to +135°C (–13 to 275°F)

• –40 to +550°C (–40 to +1022°F)

±5°C (±9°F) or ±5% of reading

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

27

Technical data13

Measurement analysis

Atmospheric transmission correction Automatic, based on inputs for distance, atmos-

Optics transmission correction Automatic, based on signals from internal sensors

Emissivity correction Variable from 0.5 to 1.0

Reflected apparent temperature correction Automatic, based on input of reflected temperature

External optics/windows correction Automatic, based on input of optics/window trans-

Measurement corrections Global object parameters

Ethernet

Ethernet

Ethernet, type

Ethernet, standard IEEE 802.3

Ethernet, connector type RJ-45

Ethernet, communication GigE Vision ver. 1.2

Ethernet, image streaming 8-bit monochrome @ 60 Hz

Ethernet, power Power over Ethernet, PoE IEEE 802.3af class 0

Ethernet, protocols

pheric temperature and relative humidity

mission and temperature

Control and image

Gigabit Ethernet

Client API GenICam compliant

• Signal linear/ DDE

• Automatic/ Manual

• Flip H&V
14-bit 80 × 64 pixels @ 60 Hz

• Signal linear/ DDE

• Temperature linear
GigE Vision and GenICam compatible

Power
TCP, UDP, ICMP, IGMP, DHCP, GigEVision

Digital input/output

Digital input, purpose

Digital input

Digital output, purpose

Digital output

Digital I/O, isolation voltage 500 VRMS

Digital I/O, supply voltage 2–40 VDC, max. 200 mA

Digital I/O, connector type 12-pole M12 connector (shared with Digital syn-

Synchronization in, purpose

Synchronization in

Synchronization in, type LVC Buffer @3.3V, “0” <0.8 V, “1”>2.0 V.

Synchronization out, purpose

Synchronization out

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

General purpose

1× opto-isolated, “0” <2, “1” = 2–12 VDC.

General purpose output to ext. device (program­matically set)

1× opto-isolated, 2–40 VDC, max. 185 mA

chronization and External power)

Frame synchronization in to control camera

1×, non-isolated

Frame synchronization out to control another FLIR
Ax5 camera

1×, non-isolated

28

Technical data13

Digital input/output

Synchronization out, type LVC Buffer @ 3.3V, ”0”=24 MA max, “1”= –24 mA

Digital synchronization, connector type 12-pole M12 connector (shared with Digital I/O

Power system

External power operation 12/24 VDC, < 3.5 W nominal < 6.0 W absolute max.

External power, connector type

Voltage Allowed range 10–30 VDC

Environmental data

Operating temperature range –15°C to +50°C (+5°F to +122°F)

max.

and External power)

12-pole M12 connector (shared with Digital I/O
and Digital Synchronization )

NOTE

The operating temperature range assumes that
the camera is mounted on the base support (in­cluded in the package) or a similar type of
heatsink.

Storage temperature range –40°C to +70°C (–40°F to +158°F)

Humidity (operating and storage) IEC 60068-2-30/24 h 95% relative humidity +25°C

EMC

Encapsulation IP 40 (IEC 60529) with base support mounted

Shock 25 g (IEC 60068-2-27)

Vibration

Physical data

Weight 0.200 kg (0.44 lb.)

Camera size (L × W × H) 106 × 40 × 43 mm (4.2 × 1.6 × 1.7 in.)

Tripod mounting UNC ¼"-20 (on three sides)

Base mounting 4 × M3 thread mounting holes (bottom)

Housing material Magnesium and aluminum

Shipping information

Packaging, type Cardboard box

List of contents

Packaging, weight

Packaging, size 295 × 200 × 105 mm (11.6 × 7.9 × 4.1 in.)

EAN-13 7332558003954

to +40°C (+77°F to +104°F)

• EN 61000-6-2 (Immunity)

• EN 61000-6-3 (Emission)

• FCC 47 CFR Part 15 Class B (Emission)

2 g (IEC 60068-2-6)

• Infrared camera with lens

• Base support

• Focus adjustment tool

• Printed documentation

4743254000643 (Estonia plant)

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

29

Technical data13

Shipping information

UPC-12
Country of origin Sweden

845188003593

Supplies & accessories:

• T951004ACC; Ethernet cable CAT6, 2 m/6.6 ft.

• T198349; Base support

• T198348; Cable kit Mains (UK,EU,US)

• T198392; Table stand kit

• T911183; Gigabit PoE injector 16 W, with multi-plugs

• T127605ACC; Cable M12 Pigtail

• T127606ACC; Cable M12 Sync

• T198342ACC; Focus adjustment tool

• T198594ACC; Transport case Ax5

• T199356; FLIR Ax5 accessory starter kit

• T198584; FLIR Tools

• T198583; FLIR Tools+ (download card incl. license key)

• DSW-10000; FLIR IR Camera Player

• T199233; FLIR Atlas SDK for .NET

• T199234; FLIR Atlas SDK for MATLAB

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

30

Technical data13

13.6 FLIR A5 f=9 mm (7.5 Hz)

P/N: 64209-0101
Rev.: 35207

General description

The FLIR A5 has features and functions that make it the natural choice for anyone who uses PC software
to solve problems and for whom 80 × 64 pixel resolution is sufficient.

Among its main features are GigE Vision and GenICam compliance, which makes it plug-and-play when
used with software packages such as IMAQ Vision and Halcon.

Key features:

• Very affordable.

• Compact (40 mm × 43 mm × 106 mm).

• GigE Vision and GenICam compliant.

• GigE Vision lockable connector.

• PoE (power over Ethernet).

• 8-bit 80 × 64 pixel images streamed at 7.5 Hz, signal linear.

• 14-bit 80 × 64 pixel images streamed at 7.5 Hz, signal and temperature linear.

• Synchronization between cameras possible.

• 1x+1x GPIO.

• Compliant with any software that supports GenICam, including National Instruments IMAQ Vision,
Stemmers Common Vision Blox, and COGNEX Vision Pro.

Typical applications:

• Automation and thermal machine vision.

• Entry level “high-speed” R&D.

Imaging and optical data

IR resolution 80 × 64 pixels

Thermal sensitivity/NETD < 0.05°C @ +30°C (+86°F) / 50 mK

Field of view (FOV)

Focal length 9 mm (0.35 in.)

Spatial resolution (IFOV)

F-number 1.25
Image frequency 7.5 Hz

Focus Fixed

Detector data

Detector type Focal plane array (FPA), uncooled VOX

Spectral range

Detector pitch 50 µm

Detector time constant Typical 12 ms

Measurement

Object temperature range

Accuracy ±5°C (±9°F) or ±5% of reading

25° × 20°

5.56 mrad

microbolometer

7.5–13 µm

• –25 to +135°C (–13 to 275°F)

• –40 to +550°C (–40 to +1022°F)

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

31

Technical data13

Measurement analysis

Atmospheric transmission correction Automatic, based on inputs for distance, atmos-

Optics transmission correction Automatic, based on signals from internal sensors

Emissivity correction Variable from 0.5 to 1.0

Reflected apparent temperature correction Automatic, based on input of reflected temperature

External optics/windows correction Automatic, based on input of optics/window trans-

Measurement corrections Global object parameters

Ethernet

Ethernet

Ethernet, type

Ethernet, standard IEEE 802.3

Ethernet, connector type RJ-45

Ethernet, communication GigE Vision ver. 1.2

Ethernet, image streaming 8-bit monochrome @ 7.5 Hz

Ethernet, power Power over Ethernet, PoE IEEE 802.3af class 0

Ethernet, protocols

pheric temperature and relative humidity

mission and temperature

Control and image

Gigabit Ethernet

Client API GenICam compliant

• Signal linear/ DDE

• Automatic/ Manual

• Flip H&V
14-bit 80 × 64 pixels @ 7.5 Hz

• Signal linear/ DDE

• Temperature linear
GigE Vision and GenICam compatible

Power
TCP, UDP, ICMP, IGMP, DHCP, GigEVision

Digital input/output

Digital input, purpose

Digital input

Digital output, purpose

Digital output

Digital I/O, isolation voltage 500 VRMS

Digital I/O, supply voltage 2–40 VDC, max. 200 mA

Digital I/O, connector type 12-pole M12 connector (shared with Digital syn-

Synchronization in, purpose

Synchronization in

Synchronization in, type LVC Buffer @3.3V, “0” <0.8 V, “1”>2.0 V.

Synchronization out, purpose

Synchronization out

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

General purpose

1× opto-isolated, “0” <2, “1” = 2–12 VDC.

General purpose output to ext. device (program­matically set)

1× opto-isolated, 2–40 VDC, max. 185 mA

chronization and External power)

Frame synchronization in to control camera

1×, non-isolated

Frame synchronization out to control another FLIR
Ax5 camera

1×, non-isolated

32

Technical data13

Digital input/output

Synchronization out, type LVC Buffer @ 3.3V, ”0”=24 MA max, “1”= –24 mA

Digital synchronization, connector type 12-pole M12 connector (shared with Digital I/O

Power system

External power operation 12/24 VDC, < 3.5 W nominal < 6.0 W absolute max.

External power, connector type

Voltage Allowed range 10–30 VDC

Environmental data

Operating temperature range –15°C to +50°C (+5°F to +122°F)

max.

and External power)

12-pole M12 connector (shared with Digital I/O
and Digital Synchronization )

NOTE

The operating temperature range assumes that
the camera is mounted on the base support (in­cluded in the package) or a similar type of
heatsink.

Storage temperature range –40°C to +70°C (–40°F to +158°F)

Humidity (operating and storage) IEC 60068-2-30/24 h 95% relative humidity +25°C

EMC

Encapsulation IP 40 (IEC 60529) with base support mounted

Shock 25 g (IEC 60068-2-27)

Vibration

Physical data

Weight 0.200 kg (0.44 lb.)

Camera size (L × W × H) 106 × 40 × 43 mm (4.2 × 1.6 × 1.7 in.)

Tripod mounting UNC ¼"-20 (on three sides)

Base mounting 4 × M3 thread mounting holes (bottom)

Housing material Magnesium and aluminum

Shipping information

Packaging, type Cardboard box

List of contents

Packaging, weight

Packaging, size 295 × 200 × 105 mm (11.6 × 7.9 × 4.1 in.)

EAN-13 7332558005637
UPC-12
Country of origin Sweden

to +40°C (+77°F to +104°F)

• EN 61000-6-2 (Immunity)

• EN 61000-6-3 (Emission)

• FCC 47 CFR Part 15 Class B (Emission)

2 g (IEC 60068-2-6)

• Infrared camera with lens

• Base support

• Focus adjustment tool

• Printed documentation

845188005849

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

33

Technical data13

Supplies & accessories:

• T951004ACC; Ethernet cable CAT6, 2 m/6.6 ft.

• T198349; Base support

• T198348; Cable kit Mains (UK,EU,US)

• T198392; Table stand kit

• T911183; Gigabit PoE injector 16 W, with multi-plugs

• T127605ACC; Cable M12 Pigtail

• T127606ACC; Cable M12 Sync

• T198342ACC; Focus adjustment tool

• T198594ACC; Transport case Ax5

• T199356; FLIR Ax5 accessory starter kit

• T198584; FLIR Tools

• T198583; FLIR Tools+ (download card incl. license key)

• DSW-10000; FLIR IR Camera Player

• T199233; FLIR Atlas SDK for .NET

• T199234; FLIR Atlas SDK for MATLAB

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

34

Technical data13

13.7 FLIR A5 f=5 mm (7.5 Hz)

P/N: 64205-0101
Rev.: 35207

General description

The FLIR A5 has features and functions that make it the natural choice for anyone who uses PC software
to solve problems and for whom 80 × 64 pixel resolution is sufficient.

Among its main features are GigE Vision and GenICam compliance, which makes it plug-and-play when
used with software packages such as IMAQ Vision and Halcon.

Key features:

• Very affordable.

• Compact (40 mm × 43 mm × 106 mm).

• GigE Vision and GenICam compliant.

• GigE Vision lockable connector.

• PoE (power over Ethernet).

• 8-bit 80 × 64 pixel images streamed at 7.5 Hz, signal linear.

• 14-bit 80 × 64 pixel images streamed at 7.5 Hz, signal and temperature linear.

• Synchronization between cameras possible.

• 1x+1x GPIO.

• Compliant with any software that supports GenICam, including National Instruments IMAQ Vision,
Stemmers Common Vision Blox, and COGNEX Vision Pro.

Typical applications:

• Automation and thermal machine vision.

• Entry level “high-speed” R&D.

Imaging and optical data

IR resolution 80 × 64 pixels

Thermal sensitivity/NETD < 0.05°C @ +30°C (+86°F) / 50 mK

Field of view (FOV)

Focal length 5 mm (0.20 in.)

Spatial resolution (IFOV)

F-number 1.25
Image frequency 7.5 Hz

Focus Fixed

Detector data

Detector type Focal plane array (FPA), uncooled VOX

Spectral range

Detector pitch 50 µm

Detector time constant Typical 12 ms

Measurement

Object temperature range

Accuracy ±5°C (±9°F) or ±5% of reading

44° × 36°

10.0 mrad

microbolometer

7.5–13 µm

• –25 to +135°C (–13 to 275°F)

• –40 to +550°C (–40 to +1022°F)

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

35

Technical data13

Measurement analysis

Atmospheric transmission correction Automatic, based on inputs for distance, atmos-

Optics transmission correction Automatic, based on signals from internal sensors

Emissivity correction Variable from 0.5 to 1.0

Reflected apparent temperature correction Automatic, based on input of reflected temperature

External optics/windows correction Automatic, based on input of optics/window trans-

Measurement corrections Global object parameters

Ethernet

Ethernet

Ethernet, type

Ethernet, standard IEEE 802.3

Ethernet, connector type RJ-45

Ethernet, communication GigE Vision ver. 1.2

Ethernet, image streaming 8-bit monochrome @ 7.5 Hz

Ethernet, power Power over Ethernet, PoE IEEE 802.3af class 0

Ethernet, protocols

pheric temperature and relative humidity

mission and temperature

Control and image

Gigabit Ethernet

Client API GenICam compliant

• Signal linear/ DDE

• Automatic/ Manual

• Flip H&V
14-bit 80 × 64 pixels @ 7.5 Hz

• Signal linear/ DDE

• Temperature linear
GigE Vision and GenICam compatible

Power
TCP, UDP, ICMP, IGMP, DHCP, GigEVision

Digital input/output

Digital input, purpose

Digital input

Digital output, purpose

Digital output

Digital I/O, isolation voltage 500 VRMS

Digital I/O, supply voltage 2–40 VDC, max. 200 mA

Digital I/O, connector type 12-pole M12 connector (shared with Digital syn-

Synchronization in, purpose

Synchronization in

Synchronization in, type LVC Buffer @3.3V, “0” <0.8 V, “1”>2.0 V.

Synchronization out, purpose

Synchronization out

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

General purpose

1× opto-isolated, “0” <2, “1” = 2–12 VDC.

General purpose output to ext. device (program­matically set)

1× opto-isolated, 2–40 VDC, max. 185 mA

chronization and External power)

Frame synchronization in to control camera

1×, non-isolated

Frame synchronization out to control another FLIR
Ax5 camera

1×, non-isolated

36

Technical data13

Digital input/output

Synchronization out, type LVC Buffer @ 3.3V, ”0”=24 MA max, “1”= –24 mA

Digital synchronization, connector type 12-pole M12 connector (shared with Digital I/O

Power system

External power operation 12/24 VDC, < 3.5 W nominal < 6.0 W absolute max.

External power, connector type

Voltage Allowed range 10–30 VDC

Environmental data

Operating temperature range –15°C to +50°C (+5°F to +122°F)

max.

and External power)

12-pole M12 connector (shared with Digital I/O
and Digital Synchronization )

NOTE

The operating temperature range assumes that
the camera is mounted on the base support (in­cluded in the package) or a similar type of
heatsink.

Storage temperature range –40°C to +70°C (–40°F to +158°F)

Humidity (operating and storage) IEC 60068-2-30/24 h 95% relative humidity +25°C

EMC

Encapsulation IP 40 (IEC 60529) with base support mounted

Shock 25 g (IEC 60068-2-27)

Vibration

Physical data

Weight 0.200 kg (0.44 lb.)

Camera size (L × W × H) 106 × 40 × 43 mm (4.2 × 1.6 × 1.7 in.)

Tripod mounting UNC ¼"-20 (on three sides)

Base mounting 4 × M3 thread mounting holes (bottom)

Housing material Magnesium and aluminum

Shipping information

Packaging, type Cardboard box

List of contents

Packaging, weight

Packaging, size 295 × 200 × 105 mm (11.6 × 7.9 × 4.1 in.)

EAN-13 7332558005620
UPC-12
Country of origin Sweden

to +40°C (+77°F to +104°F)

• EN 61000-6-2 (Immunity)

• EN 61000-6-3 (Emission)

• FCC 47 CFR Part 15 Class B (Emission)

2 g (IEC 60068-2-6)

• Infrared camera with lens

• Base support

• Focus adjustment tool

• Printed documentation

845188005832

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

37

Technical data13

Supplies & accessories:

• T951004ACC; Ethernet cable CAT6, 2 m/6.6 ft.

• T198349; Base support

• T198348; Cable kit Mains (UK,EU,US)

• T198392; Table stand kit

• T911183; Gigabit PoE injector 16 W, with multi-plugs

• T127605ACC; Cable M12 Pigtail

• T127606ACC; Cable M12 Sync

• T198342ACC; Focus adjustment tool

• T198594ACC; Transport case Ax5

• T199356; FLIR Ax5 accessory starter kit

• T198584; FLIR Tools

• T198583; FLIR Tools+ (download card incl. license key)

• DSW-10000; FLIR IR Camera Player

• T199233; FLIR Atlas SDK for .NET

• T199234; FLIR Atlas SDK for MATLAB

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

38

Technical data13

13.8 FLIR A5 f=5 mm with SC kit (7.5 Hz)

P/N: 64205-0102
Rev.: 35207

General description

The FLIR A5 has features and functions that make it the natural choice for anyone who uses PC software
to solve problems and for whom 80 × 64 pixel resolution is sufficient.

Among its main features are GigE Vision and GenICam compliance, which makes it plug-and-play when
used with software packages such as IMAQ Vision and Halcon.

Key features:

• Very affordable.

• Compact (40 mm × 43 mm × 106 mm).

• GigE Vision and GenICam compliant.

• GigE Vision lockable connector.

• PoE (power over Ethernet).

• 8-bit 80 × 64 pixel images streamed at 7.5 Hz, signal linear.

• 14-bit 80 × 64 pixel images streamed at 7.5 Hz, signal and temperature linear.

• Synchronization between cameras possible.

• 1x+1x GPIO.

• Compliant with any software that supports GenICam, including National Instruments IMAQ Vision,
Stemmers Common Vision Blox, and COGNEX Vision Pro.

Typical applications:

• Automation and thermal machine vision.

• Entry level “high-speed” R&D.

Imaging and optical data

IR resolution 80 × 64 pixels

Thermal sensitivity/NETD < 0.05°C @ +30°C (+86°F) / 50 mK

Field of view (FOV)

Focal length 5 mm (0.20 in.)

Spatial resolution (IFOV)

F-number 1.25
Image frequency 7.5 Hz

Focus Fixed

Detector data

Detector type Focal plane array (FPA), uncooled VOX

Spectral range

Detector pitch 50 µm

Detector time constant Typical 12 ms

Measurement

Object temperature range

Accuracy ±5°C (±9°F) or ±5% of reading

44° × 36°

10.0 mrad

microbolometer

7.5–13 µm

• –25 to +135°C (–13 to 275°F)

• –40 to +550°C (–40 to +1022°F)

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

39

Technical data13

Measurement analysis

Atmospheric transmission correction Automatic, based on inputs for distance, atmos-

Optics transmission correction Automatic, based on signals from internal sensors

Emissivity correction Variable from 0.5 to 1.0

Reflected apparent temperature correction Automatic, based on input of reflected temperature

External optics/windows correction Automatic, based on input of optics/window trans-

Measurement corrections Global object parameters

Ethernet

Ethernet

Ethernet, type

Ethernet, standard IEEE 802.3

Ethernet, connector type RJ-45

Ethernet, communication GigE Vision ver. 1.2

Ethernet, image streaming 8-bit monochrome @ 7.5 Hz

Ethernet, power Power over Ethernet, PoE IEEE 802.3af class 0

Ethernet, protocols

pheric temperature and relative humidity

mission and temperature

Control and image

Gigabit Ethernet

Client API GenICam compliant

• Signal linear/ DDE

• Automatic/ Manual

• Flip H&V
14-bit 80 × 64 pixels @ 7.5 Hz

• Signal linear/ DDE

• Temperature linear
GigE Vision and GenICam compatible

Power
TCP, UDP, ICMP, IGMP, DHCP, GigEVision

Digital input/output

Digital input, purpose

Digital input

Digital output, purpose

Digital output

Digital I/O, isolation voltage 500 VRMS

Digital I/O, supply voltage 2–40 VDC, max. 200 mA

Digital I/O, connector type 12-pole M12 connector (shared with Digital syn-

Synchronization in, purpose

Synchronization in

Synchronization in, type LVC Buffer @3.3V, “0” <0.8 V, “1”>2.0 V.

Synchronization out, purpose

Synchronization out

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

General purpose

1× opto-isolated, “0” <2, “1” = 2–12 VDC.

General purpose output to ext. device (program­matically set)

1× opto-isolated, 2–40 VDC, max. 185 mA

chronization and External power)

Frame synchronization in to control camera

1×, non-isolated

Frame synchronization out to control another FLIR
Ax5 camera

1×, non-isolated

40

Technical data13

Digital input/output

Synchronization out, type LVC Buffer @ 3.3V, ”0”=24 MA max, “1”= –24 mA

Digital synchronization, connector type 12-pole M12 connector (shared with Digital I/O

Power system

External power operation 12/24 VDC, < 3.5 W nominal < 6.0 W absolute max.

External power, connector type

Voltage Allowed range 10–30 VDC

Environmental data

Operating temperature range –15°C to +50°C (+5°F to +122°F)

max.

and External power)

12-pole M12 connector (shared with Digital I/O
and Digital Synchronization )

NOTE

The operating temperature range assumes that
the camera is mounted on the base support (in­cluded in the package) or a similar type of
heatsink.

Storage temperature range –40°C to +70°C (–40°F to +158°F)

Humidity (operating and storage) IEC 60068-2-30/24 h 95% relative humidity +25°C

EMC

Encapsulation IP 40 (IEC 60529) with base support mounted

Shock 25 g (IEC 60068-2-27)

Vibration

Physical data

Weight 0.200 kg (0.44 lb.)

Camera size (L × W × H) 106 × 40 × 43 mm (4.2 × 1.6 × 1.7 in.)

Tripod mounting UNC ¼"-20 (on three sides)

Base mounting 4 × M3 thread mounting holes (bottom)

Housing material Magnesium and aluminum

Shipping information

Packaging, type Cardboard box

List of contents

to +40°C (+77°F to +104°F)

• EN 61000-6-2 (Immunity)

• EN 61000-6-3 (Emission)

• FCC 47 CFR Part 15 Class B (Emission)

2 g (IEC 60068-2-6)

• Hard transport case

• Infrared camera with lens

• Base support

• Cable tie (2 ea.)

• Ethernet cable CAT-6, 2m/6.6 ft (2 ea.)

• FLIR ResearchIR Standard 4

• Focus adjustment tool

• Gooseneck

• Mains cable kit (UK,EU,US)

• PoE Injector (power over Ethernet)

• Printed documentation

• Table stand

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

41

Technical data13

Shipping information

Packaging, weight

Packaging, size 370 × 180 × 320 mm (14.6 × 7.1 × 12.6 in.)

EAN-13 7332558005675
UPC-12
Country of origin Sweden

845188005887

Supplies & accessories:

• T951004ACC; Ethernet cable CAT6, 2 m/6.6 ft.

• T198349; Base support

• T198348; Cable kit Mains (UK,EU,US)

• T198392; Table stand kit

• T911183; Gigabit PoE injector 16 W, with multi-plugs

• T127605ACC; Cable M12 Pigtail

• T127606ACC; Cable M12 Sync

• T198342ACC; Focus adjustment tool

• T198594ACC; Transport case Ax5

• T199356; FLIR Ax5 accessory starter kit

• T198584; FLIR Tools

• T198583; FLIR Tools+ (download card incl. license key)

• DSW-10000; FLIR IR Camera Player

• T199233; FLIR Atlas SDK for .NET

• T199234; FLIR Atlas SDK for MATLAB

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

42

Technical data13

13.9 FLIR A15 f=9 mm

P/N: 62309-0101
Rev.: 35207

General description

The FLIR A15 has features and functions that make it the natural choice for anyone who uses PC soft­ware to solve problems and for whom 160 × 128 pixel resolution is sufficient.

Among its main features are GigE Vision and GenICam compliance, which makes it plug-and-play when
used with software packages such as IMAQ Vision and Halcon.

Key features:

• Very affordable.

• Compact (40 mm × 43 mm × 106 mm).

• GigE Vision and GenICam compliant.

• GigE Vision lockable connector.

• PoE (power over Ethernet).

• 8-bit 160 × 128 pixel images streamed at 60 Hz, signal linear.

• 14-bit 160 × 128 pixel images streamed at 60 Hz, signal and temperature linear.

• High frame rates (60 Hz).

• Synchronization between cameras possible.

• 1x+1x GPIO.

• Compliant with any software that supports GenICam, including National Instruments IMAQ Vision,
Stemmers Common Vision Blox, and COGNEX Vision Pro.

Typical applications:

• Automation and thermal machine vision.

• Entry level “high-speed” R&D.

Imaging and optical data

IR resolution 160 × 128 pixels

Thermal sensitivity/NETD < 0.05°C @ +30°C (+86°F) / 50 mK

Field of view (FOV)

Focal length 9 mm (0.35 in.)

Spatial resolution (IFOV) 5.56 mrad

F-number 1.25
Image frequency 60 Hz

Focus Fixed

Detector data

Detector type Focal plane array (FPA), uncooled VOX

Spectral range

Detector pitch 50 µm

Detector time constant Typical 12 ms

Measurement

Object temperature range

Accuracy

48° × 39°

microbolometer

7.5–13 µm

• –25 to +135°C (–13 to 275°F)

• –40 to +550°C (–40 to +1022°F)

±5°C (±9°F) or ±5% of reading

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

43

Technical data13

Measurement analysis

Atmospheric transmission correction Automatic, based on inputs for distance, atmos-

Optics transmission correction Automatic, based on signals from internal sensors

Emissivity correction Variable from 0.5 to 1.0

Reflected apparent temperature correction Automatic, based on input of reflected temperature

External optics/windows correction Automatic, based on input of optics/window trans-

Measurement corrections Global object parameters

Ethernet

Ethernet

Ethernet, type

Ethernet, standard IEEE 802.3

Ethernet, connector type RJ-45

Ethernet, communication GigE Vision ver. 1.2

Ethernet, image streaming 8-bit monochrome @ 60 Hz

Ethernet, power Power over Ethernet, PoE IEEE 802.3af class 0

Ethernet, protocols

pheric temperature and relative humidity

mission and temperature

Control and image

Gigabit Ethernet

Client API GenICam compliant

• Signal linear/ DDE

• Automatic/ Manual

• Flip H&V
14-bit 160 × 128 pixels @ 60 Hz

• Signal linear/ DDE

• Temperature linear
GigE Vision and GenICam compatible

Power
TCP, UDP, ICMP, IGMP, DHCP, GigEVision

Digital input/output

Digital input, purpose

Digital input

Digital output, purpose

Digital output

Digital I/O, isolation voltage 500 VRMS

Digital I/O, supply voltage 2–40 VDC, max. 200 mA

Digital I/O, connector type 12-pole M12 connector (shared with Digital syn-

Synchronization in, purpose

Synchronization in

Synchronization in, type LVC Buffer @3.3V, “0” <0.8 V, “1”>2.0 V.

Synchronization out, purpose

Synchronization out

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

General purpose

1× opto-isolated, “0” <2, “1” = 2–12 VDC.

General purpose output to ext. device (program­matically set)

1× opto-isolated, 2–40 VDC, max. 185 mA

chronization and External power)

Frame synchronization in to control camera

1×, non-isolated

Frame synchronization out to control another FLIR
Ax5 camera

1×, non-isolated

44

Technical data13

Digital input/output

Synchronization out, type LVC Buffer @ 3.3V, ”0”=24 MA max, “1”= –24 mA

Digital synchronization, connector type 12-pole M12 connector (shared with Digital I/O

Power system

External power operation 12/24 VDC, < 3.5 W nominal < 6.0 W absolute max.

External power, connector type

Voltage Allowed range 10–30 VDC

Environmental data

Operating temperature range –15°C to +50°C (+5°F to +122°F)

max.

and External power)

12-pole M12 connector (shared with Digital I/O
and Digital Synchronization )

NOTE

The operating temperature range assumes that
the camera is mounted on the base support (in­cluded in the package) or a similar type of
heatsink.

Storage temperature range –40°C to +70°C (–40°F to +158°F)

Humidity (operating and storage) IEC 60068-2-30/24 h 95% relative humidity +25°C

EMC

Encapsulation IP 40 (IEC 60529) with base support mounted

Shock 25 g (IEC 60068-2-27)

Vibration

Physical data

Weight 0.200 kg (0.44 lb.)

Camera size (L × W × H) 106 × 40 × 43 mm (4.2 × 1.6 × 1.7 in.)

Tripod mounting UNC ¼"-20 (on three sides)

Base mounting 4 × M3 thread mounting holes (bottom)

Housing material Magnesium and aluminum

Shipping information

Packaging, type Cardboard box

List of contents

Packaging, weight

Packaging, size 295 × 200 × 105 mm (11.6 × 7.9 × 4.1 in.)

EAN-13 7332558003978

to +40°C (+77°F to +104°F)

• EN 61000-6-2 (Immunity)

• EN 61000-6-3 (Emission)

• FCC 47 CFR Part 15 Class B (Emission)

2 g (IEC 60068-2-6)

• Infrared camera with lens

• Base support

• Focus adjustment tool

• Printed documentation

4743254000599 (Estonia plant)

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

45

Technical data13

Shipping information

UPC-12
Country of origin Sweden

845188003548

Supplies & accessories:

• T951004ACC; Ethernet cable CAT6, 2 m/6.6 ft.

• T198349; Base support

• T198348; Cable kit Mains (UK,EU,US)

• T198392; Table stand kit

• T911183; Gigabit PoE injector 16 W, with multi-plugs

• T127605ACC; Cable M12 Pigtail

• T127606ACC; Cable M12 Sync

• T198342ACC; Focus adjustment tool

• T198594ACC; Transport case Ax5

• T199356; FLIR Ax5 accessory starter kit

• T198584; FLIR Tools

• T198583; FLIR Tools+ (download card incl. license key)

• DSW-10000; FLIR IR Camera Player

• T199233; FLIR Atlas SDK for .NET

• T199234; FLIR Atlas SDK for MATLAB

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

46

Technical data13

13.10 FLIR A15 f=9 mm with SC kit (7.5 Hz)

P/N: 64309-0102
Rev.: 35207

General description

The FLIR A15 has features and functions that make it the natural choice for anyone who uses PC soft­ware to solve problems and for whom 160 × 128 pixel resolution is sufficient.

Among its main features are GigE Vision and GenICam compliance, which makes it plug-and-play when
used with software packages such as IMAQ Vision and Halcon.

Key features:

• Very affordable.

• Compact (40 mm × 43 mm × 106 mm).

• GigE Vision and GenICam compliant.

• GigE Vision lockable connector.

• PoE (power over Ethernet).

• 8-bit 160 × 128 pixel images streamed at 7.5 Hz, signal linear.

• 14-bit 160 × 128 pixel images streamed at 7.5 Hz, signal and temperature linear.

• Synchronization between cameras possible.

• 1x+1x GPIO.

• Compliant with any software that supports GenICam, including National Instruments IMAQ Vision,
Stemmers Common Vision Blox, and COGNEX Vision Pro.

Typical applications:

• Automation and thermal machine vision.

• Entry level “high-speed” R&D.

Imaging and optical data

IR resolution 160 × 128 pixels

Thermal sensitivity/NETD < 0.05°C @ +30°C (+86°F) / 50 mK

Field of view (FOV)

Focal length 9 mm (0.35 in.)

Spatial resolution (IFOV)

F-number 1.25
Image frequency 7.5 Hz

Focus Fixed

Detector data

Detector type Focal plane array (FPA), uncooled VOX

Spectral range

Detector pitch 50 µm

Detector time constant Typical 12 ms

Measurement

Object temperature range

Accuracy ±5°C (±9°F) or ±5% of reading

48° × 39°

5.56 mrad

microbolometer

7.5–13 µm

• –25 to +135°C (–13 to 275°F)

• –40 to +550°C (–40 to +1022°F)

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

47

Technical data13

Measurement analysis

Atmospheric transmission correction Automatic, based on inputs for distance, atmos-

Optics transmission correction Automatic, based on signals from internal sensors

Emissivity correction Variable from 0.5 to 1.0

Reflected apparent temperature correction Automatic, based on input of reflected temperature

External optics/windows correction Automatic, based on input of optics/window trans-

Measurement corrections Global object parameters

Ethernet

Ethernet

Ethernet, type

Ethernet, standard IEEE 802.3

Ethernet, connector type RJ-45

Ethernet, communication GigE Vision ver. 1.2

Ethernet, image streaming 8-bit monochrome @ 7.5 Hz

Ethernet, power Power over Ethernet, PoE IEEE 802.3af class 0

Ethernet, protocols

pheric temperature and relative humidity

mission and temperature

Control and image

Gigabit Ethernet

Client API GenICam compliant

• Signal linear/ DDE

• Automatic/ Manual

• Flip H&V
14-bit 160 × 128 pixels @ 7.5 Hz

• Signal linear/ DDE

• Temperature linear
GigE Vision and GenICam compatible

Power
TCP, UDP, ICMP, IGMP, DHCP, GigEVision

Digital input/output

Digital input, purpose

Digital input

Digital output, purpose

Digital output

Digital I/O, isolation voltage 500 VRMS

Digital I/O, supply voltage 2–40 VDC, max. 200 mA

Digital I/O, connector type 12-pole M12 connector (shared with Digital syn-

Synchronization in, purpose

Synchronization in

Synchronization in, type LVC Buffer @3.3V, “0” <0.8 V, “1”>2.0 V.

Synchronization out, purpose

Synchronization out

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

General purpose

1× opto-isolated, “0” <2, “1” = 2–12 VDC.

General purpose output to ext. device (program­matically set)

1× opto-isolated, 2–40 VDC, max. 185 mA

chronization and External power)

Frame synchronization in to control camera

1×, non-isolated

Frame synchronization out to control another FLIR
Ax5 camera

1×, non-isolated

48

Technical data13

Digital input/output

Synchronization out, type LVC Buffer @ 3.3V, ”0”=24 MA max, “1”= –24 mA

Digital synchronization, connector type 12-pole M12 connector (shared with Digital I/O

Power system

External power operation 12/24 VDC, < 3.5 W nominal < 6.0 W absolute max.

External power, connector type

Voltage Allowed range 10–30 VDC

Environmental data

Operating temperature range –15°C to +50°C (+5°F to +122°F)

max.

and External power)

12-pole M12 connector (shared with Digital I/O
and Digital Synchronization )

NOTE

The operating temperature range assumes that
the camera is mounted on the base support (in­cluded in the package) or a similar type of
heatsink.

Storage temperature range –40°C to +70°C (–40°F to +158°F)

Humidity (operating and storage) IEC 60068-2-30/24 h 95% relative humidity +25°C

EMC

Encapsulation IP 40 (IEC 60529) with base support mounted

Shock 25 g (IEC 60068-2-27)

Vibration

Physical data

Weight 0.200 kg (0.44 lb.)

Camera size (L × W × H) 106 × 40 × 43 mm (4.2 × 1.6 × 1.7 in.)

Tripod mounting UNC ¼"-20 (on three sides)

Base mounting 4 × M3 thread mounting holes (bottom)

Housing material Magnesium and aluminum

Shipping information

Packaging, type Cardboard box

List of contents

to +40°C (+77°F to +104°F)

• EN 61000-6-2 (Immunity)

• EN 61000-6-3 (Emission)

• FCC 47 CFR Part 15 Class B (Emission)

2 g (IEC 60068-2-6)

• Hard transport case

• Infrared camera with lens

• Base support

• Cable tie (2 ea.)

• Ethernet cable CAT-6, 2m/6.6 ft (2 ea.)

• FLIR ResearchIR Standard 4

• Focus adjustment tool

• Gooseneck

• Mains cable kit (UK,EU,US)

• PoE Injector (power over Ethernet)

• Printed documentation

• Table stand

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

49

Technical data13

Shipping information

Packaging, weight

Packaging, size 370 × 180 × 320 mm (14.6 × 7.1 × 12.6 in.)

EAN-13 7332558005651
UPC-12
Country of origin Sweden

845188005863

Supplies & accessories:

• T951004ACC; Ethernet cable CAT6, 2 m/6.6 ft.

• T198349; Base support

• T198348; Cable kit Mains (UK,EU,US)

• T198392; Table stand kit

• T911183; Gigabit PoE injector 16 W, with multi-plugs

• T127605ACC; Cable M12 Pigtail

• T127606ACC; Cable M12 Sync

• T198342ACC; Focus adjustment tool

• T198594ACC; Transport case Ax5

• T199356; FLIR Ax5 accessory starter kit

• T198584; FLIR Tools

• T198583; FLIR Tools+ (download card incl. license key)

• DSW-10000; FLIR IR Camera Player

• T199233; FLIR Atlas SDK for .NET

• T199234; FLIR Atlas SDK for MATLAB

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

50

Technical data13

13.11 FLIR A15 f=9 mm (7.5 Hz)

P/N: 64309-0101
Rev.: 35207

General description

The FLIR A15 has features and functions that make it the natural choice for anyone who uses PC soft­ware to solve problems and for whom 160 × 128 pixel resolution is sufficient.

Among its main features are GigE Vision and GenICam compliance, which makes it plug-and-play when
used with software packages such as IMAQ Vision and Halcon.

Key features:

• Very affordable.

• Compact (40 mm × 43 mm × 106 mm).

• GigE Vision and GenICam compliant.

• GigE Vision lockable connector.

• PoE (power over Ethernet).

• 8-bit 160 × 128 pixel images streamed at 7.5 Hz, signal linear.

• 14-bit 160 × 128 pixel images streamed at 7.5 Hz, signal and temperature linear.

• Synchronization between cameras possible.

• 1x+1x GPIO.

• Compliant with any software that supports GenICam, including National Instruments IMAQ Vision,
Stemmers Common Vision Blox, and COGNEX Vision Pro.

Typical applications:

• Automation and thermal machine vision.

• Entry level “high-speed” R&D.

Imaging and optical data

IR resolution 160 × 128 pixels

Thermal sensitivity/NETD < 0.05°C @ +30°C (+86°F) / 50 mK

Field of view (FOV)

Focal length 9 mm (0.35 in.)

Spatial resolution (IFOV)

F-number 1.25
Image frequency 7.5 Hz

Focus Fixed

Detector data

Detector type Focal plane array (FPA), uncooled VOX

Spectral range

Detector pitch 50 µm

Detector time constant Typical 12 ms

Measurement

Object temperature range

Accuracy ±5°C (±9°F) or ±5% of reading

48° × 39°

5.56 mrad

microbolometer

7.5–13 µm

• –25 to +135°C (–13 to 275°F)

• –40 to +550°C (–40 to +1022°F)

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

51

Technical data13

Measurement analysis

Atmospheric transmission correction Automatic, based on inputs for distance, atmos-

Optics transmission correction Automatic, based on signals from internal sensors

Emissivity correction Variable from 0.5 to 1.0

Reflected apparent temperature correction Automatic, based on input of reflected temperature

External optics/windows correction Automatic, based on input of optics/window trans-

Measurement corrections Global object parameters

Ethernet

Ethernet

Ethernet, type

Ethernet, standard IEEE 802.3

Ethernet, connector type RJ-45

Ethernet, communication GigE Vision ver. 1.2

Ethernet, image streaming 8-bit monochrome @ 7.5 Hz

Ethernet, power Power over Ethernet, PoE IEEE 802.3af class 0

Ethernet, protocols

pheric temperature and relative humidity

mission and temperature

Control and image

Gigabit Ethernet

Client API GenICam compliant

• Signal linear/ DDE

• Automatic/ Manual

• Flip H&V
14-bit 160 × 128 pixels @ 7.5 Hz

• Signal linear/ DDE

• Temperature linear
GigE Vision and GenICam compatible

Power
TCP, UDP, ICMP, IGMP, DHCP, GigEVision

Digital input/output

Digital input, purpose

Digital input

Digital output, purpose

Digital output

Digital I/O, isolation voltage 500 VRMS

Digital I/O, supply voltage 2–40 VDC, max. 200 mA

Digital I/O, connector type 12-pole M12 connector (shared with Digital syn-

Synchronization in, purpose

Synchronization in

Synchronization in, type LVC Buffer @3.3V, “0” <0.8 V, “1”>2.0 V.

Synchronization out, purpose

Synchronization out

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

General purpose

1× opto-isolated, “0” <2, “1” = 2–12 VDC.

General purpose output to ext. device (program­matically set)

1× opto-isolated, 2–40 VDC, max. 185 mA

chronization and External power)

Frame synchronization in to control camera

1×, non-isolated

Frame synchronization out to control another FLIR
Ax5 camera

1×, non-isolated

52

Technical data13

Digital input/output

Synchronization out, type LVC Buffer @ 3.3V, ”0”=24 MA max, “1”= –24 mA

Digital synchronization, connector type 12-pole M12 connector (shared with Digital I/O

Power system

External power operation 12/24 VDC, < 3.5 W nominal < 6.0 W absolute max.

External power, connector type

Voltage Allowed range 10–30 VDC

Environmental data

Operating temperature range –15°C to +50°C (+5°F to +122°F)

max.

and External power)

12-pole M12 connector (shared with Digital I/O
and Digital Synchronization )

NOTE

The operating temperature range assumes that
the camera is mounted on the base support (in­cluded in the package) or a similar type of
heatsink.

Storage temperature range –40°C to +70°C (–40°F to +158°F)

Humidity (operating and storage) IEC 60068-2-30/24 h 95% relative humidity +25°C

EMC

Encapsulation IP 40 (IEC 60529) with base support mounted

Shock 25 g (IEC 60068-2-27)

Vibration

Physical data

Weight 0.200 kg (0.44 lb.)

Camera size (L × W × H) 106 × 40 × 43 mm (4.2 × 1.6 × 1.7 in.)

Tripod mounting UNC ¼"-20 (on three sides)

Base mounting 4 × M3 thread mounting holes (bottom)

Housing material Magnesium and aluminum

Shipping information

Packaging, type Cardboard box

List of contents

Packaging, weight

Packaging, size 295 × 200 × 105 mm (11.6 × 7.9 × 4.1 in.)

EAN-13 7332558005644
UPC-12
Country of origin Sweden

to +40°C (+77°F to +104°F)

• EN 61000-6-2 (Immunity)

• EN 61000-6-3 (Emission)

• FCC 47 CFR Part 15 Class B (Emission)

2 g (IEC 60068-2-6)

• Infrared camera with lens

• Base support

• Focus adjustment tool

• Printed documentation

845188005856

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

53

Technical data13

Supplies & accessories:

• T951004ACC; Ethernet cable CAT6, 2 m/6.6 ft.

• T198349; Base support

• T198348; Cable kit Mains (UK,EU,US)

• T198392; Table stand kit

• T911183; Gigabit PoE injector 16 W, with multi-plugs

• T127605ACC; Cable M12 Pigtail

• T127606ACC; Cable M12 Sync

• T198342ACC; Focus adjustment tool

• T198594ACC; Transport case Ax5

• T199356; FLIR Ax5 accessory starter kit

• T198584; FLIR Tools

• T198583; FLIR Tools+ (download card incl. license key)

• DSW-10000; FLIR IR Camera Player

• T199233; FLIR Atlas SDK for .NET

• T199234; FLIR Atlas SDK for MATLAB

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

54

Technical data13

13.12 FLIR A15 f=19 mm (7.5 Hz)

P/N: 64319-0101
Rev.: 35207

General description

The FLIR A15 has features and functions that make it the natural choice for anyone who uses PC soft­ware to solve problems and for whom 160 × 128 pixel resolution is sufficient.

Among its main features are GigE Vision and GenICam compliance, which makes it plug-and-play when
used with software packages such as IMAQ Vision and Halcon.

Key features:

• Very affordable.

• Compact (40 mm × 43 mm × 106 mm).

• GigE Vision and GenICam compliant.

• GigE Vision lockable connector.

• PoE (power over Ethernet).

• 8-bit 160 × 128 pixel images streamed at 7.5 Hz, signal linear.

• 14-bit 160 × 128 pixel images streamed at 7.5 Hz, signal and temperature linear.

• Synchronization between cameras possible.

• 1x+1x GPIO.

• Compliant with any software that supports GenICam, including National Instruments IMAQ Vision,
Stemmers Common Vision Blox, and COGNEX Vision Pro.

Typical applications:

• Automation and thermal machine vision.

• Entry level “high-speed” R&D.

Imaging and optical data

IR resolution 160 × 128 pixels

Thermal sensitivity/NETD < 0.05°C @ +30°C (+86°F) / 50 mK

Field of view (FOV)

Focal length 19 mm (0.75 in.)

Spatial resolution (IFOV)

F-number 1.25
Image frequency 7.5 Hz

Focus Fixed

Detector data

Detector type Focal plane array (FPA), uncooled VOX

Spectral range

Detector pitch 50 µm

Detector time constant Typical 12 ms

Measurement

Object temperature range

Accuracy ±5°C (±9°F) or ±5% of reading

25° × 19°

2.63 mrad

microbolometer

7.5–13 µm

• –25 to +135°C (–13 to 275°F)

• –40 to +550°C (–40 to +1022°F)

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

55

Technical data13

Measurement analysis

Atmospheric transmission correction Automatic, based on inputs for distance, atmos-

Optics transmission correction Automatic, based on signals from internal sensors

Emissivity correction Variable from 0.5 to 1.0

Reflected apparent temperature correction Automatic, based on input of reflected temperature

External optics/windows correction Automatic, based on input of optics/window trans-

Measurement corrections Global object parameters

Ethernet

Ethernet

Ethernet, type

Ethernet, standard IEEE 802.3

Ethernet, connector type RJ-45

Ethernet, communication GigE Vision ver. 1.2

Ethernet, image streaming 8-bit monochrome @ 7.5 Hz

Ethernet, power Power over Ethernet, PoE IEEE 802.3af class 0

Ethernet, protocols

pheric temperature and relative humidity

mission and temperature

Control and image

Gigabit Ethernet

Client API GenICam compliant

• Signal linear/ DDE

• Automatic/ Manual

• Flip H&V
14-bit 160 × 128 pixels @ 7.5 Hz

• Signal linear/ DDE

• Temperature linear
GigE Vision and GenICam compatible

Power
TCP, UDP, ICMP, IGMP, DHCP, GigEVision

Digital input/output

Digital input, purpose

Digital input

Digital output, purpose

Digital output

Digital I/O, isolation voltage 500 VRMS

Digital I/O, supply voltage 2–40 VDC, max. 200 mA

Digital I/O, connector type 12-pole M12 connector (shared with Digital syn-

Synchronization in, purpose

Synchronization in

Synchronization in, type LVC Buffer @3.3V, “0” <0.8 V, “1”>2.0 V.

Synchronization out, purpose

Synchronization out

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

General purpose

1× opto-isolated, “0” <2, “1” = 2–12 VDC.

General purpose output to ext. device (program­matically set)

1× opto-isolated, 2–40 VDC, max. 185 mA

chronization and External power)

Frame synchronization in to control camera

1×, non-isolated

Frame synchronization out to control another FLIR
Ax5 camera

1×, non-isolated

56

Technical data13

Digital input/output

Synchronization out, type LVC Buffer @ 3.3V, ”0”=24 MA max, “1”= –24 mA

Digital synchronization, connector type 12-pole M12 connector (shared with Digital I/O

Power system

External power operation 12/24 VDC, < 3.5 W nominal < 6.0 W absolute max.

External power, connector type

Voltage Allowed range 10–30 VDC

Environmental data

Operating temperature range –15°C to +50°C (+5°F to +122°F)

max.

and External power)

12-pole M12 connector (shared with Digital I/O
and Digital Synchronization )

NOTE

The operating temperature range assumes that
the camera is mounted on the base support (in­cluded in the package) or a similar type of
heatsink.

Storage temperature range –40°C to +70°C (–40°F to +158°F)

Humidity (operating and storage) IEC 60068-2-30/24 h 95% relative humidity +25°C

EMC

Encapsulation IP 40 (IEC 60529) with base support mounted

Shock 25 g (IEC 60068-2-27)

Vibration

Physical data

Weight 0.200 kg (0.44 lb.)

Camera size (L × W × H) 106 × 40 × 43 mm (4.2 × 1.6 × 1.7 in.)

Tripod mounting UNC ¼"-20 (on three sides)

Base mounting 4 × M3 thread mounting holes (bottom)

Housing material Magnesium and aluminum

Shipping information

Packaging, type Cardboard box

List of contents

Packaging, weight

Packaging, size 295 × 200 × 105 mm (11.6 × 7.9 × 4.1 in.)

EAN-13 7332558005668
UPC-12
Country of origin Sweden

to +40°C (+77°F to +104°F)

• EN 61000-6-2 (Immunity)

• EN 61000-6-3 (Emission)

• FCC 47 CFR Part 15 Class B (Emission)

2 g (IEC 60068-2-6)

• Infrared camera with lens

• Base support

• Focus adjustment tool

• Printed documentation

845188005870

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

57

Technical data13

Supplies & accessories:

• T951004ACC; Ethernet cable CAT6, 2 m/6.6 ft.

• T198349; Base support

• T198348; Cable kit Mains (UK,EU,US)

• T198392; Table stand kit

• T911183; Gigabit PoE injector 16 W, with multi-plugs

• T127605ACC; Cable M12 Pigtail

• T127606ACC; Cable M12 Sync

• T198342ACC; Focus adjustment tool

• T198594ACC; Transport case Ax5

• T199356; FLIR Ax5 accessory starter kit

• T198584; FLIR Tools

• T198583; FLIR Tools+ (download card incl. license key)

• DSW-10000; FLIR IR Camera Player

• T199233; FLIR Atlas SDK for .NET

• T199234; FLIR Atlas SDK for MATLAB

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

58

Technical data13

13.13 FLIR A15 f=19 mm

P/N: 62319-0101
Rev.: 35207

General description

The FLIR A15 has features and functions that make it the natural choice for anyone who uses PC soft­ware to solve problems and for whom 160 × 128 pixel resolution is sufficient.

Among its main features are GigE Vision and GenICam compliance, which makes it plug-and-play when
used with software packages such as IMAQ Vision and Halcon.

Key features:

• Very affordable.

• Compact (40 mm × 43 mm × 106 mm).

• GigE Vision and GenICam compliant.

• GigE Vision lockable connector.

• PoE (power over Ethernet).

• 8-bit 160 × 128 pixel images streamed at 60 Hz, signal linear.

• 14-bit 160 × 128 pixel images streamed at 60 Hz, signal and temperature linear.

• High frame rates (60 Hz).

• Synchronization between cameras possible.

• 1x+1x GPIO.

• Compliant with any software that supports GenICam, including National Instruments IMAQ Vision,
Stemmers Common Vision Blox, and COGNEX Vision Pro.

Typical applications:

• Automation and thermal machine vision.

• Entry level “high-speed” R&D.

Imaging and optical data

IR resolution 160 × 128 pixels

Thermal sensitivity/NETD < 0.05°C @ +30°C (+86°F) / 50 mK

Field of view (FOV)

Focal length 19 mm (0.75 in.)

Spatial resolution (IFOV) 2.63 mrad

F-number 1.25
Image frequency 60 Hz

Focus Fixed

Detector data

Detector type Focal plane array (FPA), uncooled VOX

Spectral range

Detector pitch 50 µm

Detector time constant Typical 12 ms

Measurement

Object temperature range

Accuracy

25° × 19°

microbolometer

7.5–13 µm

• –25 to +135°C (–13 to 275°F)

• –40 to +550°C (–40 to +1022°F)

±5°C (±9°F) or ±5% of reading

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

59

Technical data13

Measurement analysis

Atmospheric transmission correction Automatic, based on inputs for distance, atmos-

Optics transmission correction Automatic, based on signals from internal sensors

Emissivity correction Variable from 0.5 to 1.0

Reflected apparent temperature correction Automatic, based on input of reflected temperature

External optics/windows correction Automatic, based on input of optics/window trans-

Measurement corrections Global object parameters

Ethernet

Ethernet

Ethernet, type

Ethernet, standard IEEE 802.3

Ethernet, connector type RJ-45

Ethernet, communication GigE Vision ver. 1.2

Ethernet, image streaming 8-bit monochrome @ 60 Hz

Ethernet, power Power over Ethernet, PoE IEEE 802.3af class 0

Ethernet, protocols

pheric temperature and relative humidity

mission and temperature

Control and image

Gigabit Ethernet

Client API GenICam compliant

• Signal linear/ DDE

• Automatic/ Manual

• Flip H&V
14-bit 160 × 128 pixels @ 60 Hz

• Signal linear/ DDE

• Temperature linear
GigE Vision and GenICam compatible

Power
TCP, UDP, ICMP, IGMP, DHCP, GigEVision

Digital input/output

Digital input, purpose

Digital input

Digital output, purpose

Digital output

Digital I/O, isolation voltage 500 VRMS

Digital I/O, supply voltage 2–40 VDC, max. 200 mA

Digital I/O, connector type 12-pole M12 connector (shared with Digital syn-

Synchronization in, purpose

Synchronization in

Synchronization in, type LVC Buffer @3.3V, “0” <0.8 V, “1”>2.0 V.

Synchronization out, purpose

Synchronization out

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

General purpose

1× opto-isolated, “0” <2, “1” = 2–12 VDC.

General purpose output to ext. device (program­matically set)

1× opto-isolated, 2–40 VDC, max. 185 mA

chronization and External power)

Frame synchronization in to control camera

1×, non-isolated

Frame synchronization out to control another FLIR
Ax5 camera

1×, non-isolated

60

Technical data13

Digital input/output

Synchronization out, type LVC Buffer @ 3.3V, ”0”=24 MA max, “1”= –24 mA

Digital synchronization, connector type 12-pole M12 connector (shared with Digital I/O

Power system

External power operation 12/24 VDC, < 3.5 W nominal < 6.0 W absolute max.

External power, connector type

Voltage Allowed range 10–30 VDC

Environmental data

Operating temperature range –15°C to +50°C (+5°F to +122°F)

max.

and External power)

12-pole M12 connector (shared with Digital I/O
and Digital Synchronization )

NOTE

The operating temperature range assumes that
the camera is mounted on the base support (in­cluded in the package) or a similar type of
heatsink.

Storage temperature range –40°C to +70°C (–40°F to +158°F)

Humidity (operating and storage) IEC 60068-2-30/24 h 95% relative humidity +25°C

EMC

Encapsulation IP 40 (IEC 60529) with base support mounted

Shock 25 g (IEC 60068-2-27)

Vibration

Physical data

Weight 0.200 kg (0.44 lb.)

Camera size (L × W × H) 106 × 40 × 43 mm (4.2 × 1.6 × 1.7 in.)

Tripod mounting UNC ¼"-20 (on three sides)

Base mounting 4 × M3 thread mounting holes (bottom)

Housing material Magnesium and aluminum

Shipping information

Packaging, type Cardboard box

List of contents

Packaging, weight

Packaging, size 295 × 200 × 105 mm (11.6 × 7.9 × 4.1 in.)

EAN-13 7332558003992

to +40°C (+77°F to +104°F)

• EN 61000-6-2 (Immunity)

• EN 61000-6-3 (Emission)

• FCC 47 CFR Part 15 Class B (Emission)

2 g (IEC 60068-2-6)

• Infrared camera with lens

• Base support

• Focus adjustment tool

• Printed documentation

4743254000605 (Estonia plant)

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

61

Technical data13

Shipping information

UPC-12
Country of origin Sweden

845188003555

Supplies & accessories:

• T951004ACC; Ethernet cable CAT6, 2 m/6.6 ft.

• T198349; Base support

• T198348; Cable kit Mains (UK,EU,US)

• T198392; Table stand kit

• T911183; Gigabit PoE injector 16 W, with multi-plugs

• T127605ACC; Cable M12 Pigtail

• T127606ACC; Cable M12 Sync

• T198342ACC; Focus adjustment tool

• T198594ACC; Transport case Ax5

• T199356; FLIR Ax5 accessory starter kit

• T198584; FLIR Tools

• T198583; FLIR Tools+ (download card incl. license key)

• DSW-10000; FLIR IR Camera Player

• T199233; FLIR Atlas SDK for .NET

• T199234; FLIR Atlas SDK for MATLAB

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

62

Technical data13

13.14 FLIR A35 f=9 mm

P/N: 73309-0101
Rev.: 35207

General description

The FLIR A35 has features and functions that make it the natural choice for anyone who uses PC soft­ware to solve problems and for whom 320 × 256 pixel resolution is sufficient.

Among its main features are GigE Vision and GenICam compliance, which makes it plug-and-play when
used with software packages such as IMAQ Vision and Halcon.

Key features:

• Very affordable.

• Compact (40 mm × 43 mm × 106 mm).

• GigE Vision and GenICam compliant.

• GigE Vision lockable connector.

• PoE (power over Ethernet).

• 8-bit 320 × 256 pixel images streamed at 60 Hz, signal linear.

• 14-bit 320 × 256 pixel images streamed at 60 Hz, signal and temperature linear.

• High frame rates (60 Hz).

• Synchronization between cameras possible.

• 1x+1x GPIO.

• Compliant with any software that supports GenICam, including National Instruments IMAQ Vision,
Stemmers Common Vision Blox, and COGNEX Vision Pro.

Typical applications:

• Automation and thermal machine vision.

• Entry level “high-speed” R&D.

Imaging and optical data

IR resolution 320 × 256 pixels

Thermal sensitivity/NETD < 0.05°C @ +30°C (+86°F) / 50 mK

Field of view (FOV)

Focal length 9 mm (0.35 in.)

Spatial resolution (IFOV) 2.78 mrad

F-number 1.25
Image frequency 60 Hz

Focus Fixed

Detector data

Detector type Focal plane array (FPA), uncooled VOX

Spectral range

Detector pitch 25 µm

Detector time constant Typical 12 ms

Measurement

Object temperature range

Accuracy

48° × 39°

microbolometer

7.5–13 µm

• –25 to +135°C (–13 to 275°F)

• –40 to +550°C (–40 to +1022°F)

±5°C (±9°F) or ±5% of reading

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

63

Technical data13

Measurement analysis

Atmospheric transmission correction Automatic, based on inputs for distance, atmos-

Optics transmission correction Automatic, based on signals from internal sensors

Emissivity correction Variable from 0.5 to 1.0

Reflected apparent temperature correction Automatic, based on input of reflected temperature

External optics/windows correction Automatic, based on input of optics/window trans-

Measurement corrections Global object parameters

Ethernet

Ethernet

Ethernet, type

Ethernet, standard IEEE 802.3

Ethernet, connector type RJ-45

Ethernet, communication GigE Vision ver. 1.2

Ethernet, image streaming 8-bit monochrome @ 60 Hz

Ethernet, power Power over Ethernet, PoE IEEE 802.3af class 0

Ethernet, protocols

pheric temperature and relative humidity

mission and temperature

Control and image

Gigabit Ethernet

Client API GenICam compliant

• Signal linear/ DDE

• Automatic/ Manual

• Flip H&V
14-bit 320 × 256 pixels @ 60 Hz

• Signal linear/ DDE

• Temperature linear
GigE Vision and GenICam compatible

Power
TCP, UDP, ICMP, IGMP, DHCP, GigEVision

Digital input/output

Digital input, purpose

Digital input

Digital output, purpose

Digital output

Digital I/O, isolation voltage 500 VRMS

Digital I/O, supply voltage 2–40 VDC, max. 200 mA

Digital I/O, connector type 12-pole M12 connector (shared with Digital syn-

Synchronization in, purpose

Synchronization in

Synchronization in, type LVC Buffer @3.3V, “0” <0.8 V, “1”>2.0 V.

Synchronization out, purpose

Synchronization out

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

General purpose

1× opto-isolated, “0” <1.2 VDC, “1” = 2–25 VDC.

General purpose output to ext. device (program­matically set)

1× opto-isolated, 2–40 VDC, max. 185 mA

chronization and External power)

Frame synchronization in to control camera

1×, non-isolated

Frame synchronization out to control another FLIR
Ax5 camera

1×, non-isolated

64

Technical data13

Digital input/output

Synchronization out, type LVC Buffer @ 3.3V, ”0”=24 MA max, “1”= –24 mA

Digital synchronization, connector type 12-pole M12 connector (shared with Digital I/O

Power system

External power operation 12/24 VDC, < 3.5 W nominal < 6.0 W absolute max.

External power, connector type

Voltage Allowed range 10–30 VDC

Environmental data

Operating temperature range –15°C to +50°C (+5°F to +122°F)

max.

and External power)

12-pole M12 connector (shared with Digital I/O
and Digital Synchronization )

NOTE

The operating temperature range assumes that
the camera is mounted on the base support (in­cluded in the package) or a similar type of
heatsink.

Storage temperature range –40°C to +70°C (–40°F to +158°F)

Humidity (operating and storage) IEC 60068-2-30/24 h 95% relative humidity +25°C

EMC

Encapsulation IP 40 (IEC 60529) with base support mounted

Shock 25 g (IEC 60068-2-27)

Vibration

Physical data

Weight 0.200 kg (0.44 lb.)

Camera size (L × W × H) 106 × 40 × 43 mm (4.2 × 1.6 × 1.7 in.)

Tripod mounting UNC ¼"-20 (on three sides)

Base mounting 4 × M3 thread mounting holes (bottom)

Housing material Magnesium and aluminum

Shipping information

Packaging, type Cardboard box

List of contents

Packaging, weight

Packaging, size 295 × 200 × 105 mm (11.6 × 7.9 × 4.1 in.)

EAN-13 7332558010563
UPC-12
Country of origin Sweden

to +40°C (+77°F to +104°F)

• EN 61000-6-2 (Immunity)

• EN 61000-6-3 (Emission)

• FCC 47 CFR Part 15 Class B (Emission)

2 g (IEC 60068-2-6)

• Infrared camera with lens

• Base support

• Focus adjustment tool

• Printed documentation

845188011239

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

65

Technical data13

Supplies & accessories:

• T951004ACC; Ethernet cable CAT6, 2 m/6.6 ft.

• T198349; Base support

• T198348; Cable kit Mains (UK,EU,US)

• T198392; Table stand kit

• T911183; Gigabit PoE injector 16 W, with multi-plugs

• T127605ACC; Cable M12 Pigtail

• T127606ACC; Cable M12 Sync

• T198594ACC; Transport case Ax5

• T199356; FLIR Ax5 accessory starter kit

• T198584; FLIR Tools

• T198583; FLIR Tools+ (download card incl. license key)

• DSW-10000; FLIR IR Camera Player

• T199233; FLIR Atlas SDK for .NET

• T199234; FLIR Atlas SDK for MATLAB

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

66

Technical data13

13.15 FLIR A35 f=9 mm with SC kit

P/N: 73309-0102
Rev.: 35207

General description

The FLIR A35 has features and functions that make it the natural choice for anyone who uses PC soft­ware to solve problems and for whom 320 × 256 pixel resolution is sufficient.

Among its main features are GigE Vision and GenICam compliance, which makes it plug-and-play when
used with software packages such as IMAQ Vision and Halcon.

Key features:

• Very affordable.

• Compact (40 mm × 43 mm × 106 mm).

• GigE Vision and GenICam compliant.

• GigE Vision lockable connector.

• PoE (power over Ethernet).

• 8-bit 320 × 256 pixel images streamed at 60 Hz, signal linear.

• 14-bit 320 × 256 pixel images streamed at 60 Hz, signal and temperature linear.

• High frame rates (60 Hz).

• Synchronization between cameras possible.

• 1x+1x GPIO.

• Compliant with any software that supports GenICam, including National Instruments IMAQ Vision,
Stemmers Common Vision Blox, and COGNEX Vision Pro.

Typical applications:

• Automation and thermal machine vision.

• Entry level “high-speed” R&D.

Imaging and optical data

IR resolution 320 × 256 pixels

Thermal sensitivity/NETD < 0.05°C @ +30°C (+86°F) / 50 mK

Field of view (FOV)

Focal length 9 mm (0.35 in.)

Spatial resolution (IFOV) 2.78 mrad

F-number 1.25
Image frequency 60 Hz

Focus Fixed

Detector data

Detector type Focal plane array (FPA), uncooled VOX

Spectral range

Detector pitch 25 µm

Detector time constant Typical 12 ms

Measurement

Object temperature range

Accuracy

48° × 39°

microbolometer

7.5–13 µm

• –25 to +135°C (–13 to 275°F)

• –40 to +550°C (–40 to +1022°F)

±5°C (±9°F) or ±5% of reading

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

67

Technical data13

Measurement analysis

Atmospheric transmission correction Automatic, based on inputs for distance, atmos-

Optics transmission correction Automatic, based on signals from internal sensors

Emissivity correction Variable from 0.5 to 1.0

Reflected apparent temperature correction Automatic, based on input of reflected temperature

External optics/windows correction Automatic, based on input of optics/window trans-

Measurement corrections Global object parameters

Ethernet

Ethernet

Ethernet, type

Ethernet, standard IEEE 802.3

Ethernet, connector type RJ-45

Ethernet, communication GigE Vision ver. 1.2

Ethernet, image streaming 8-bit monochrome @ 60 Hz

Ethernet, power Power over Ethernet, PoE IEEE 802.3af class 0

Ethernet, protocols

pheric temperature and relative humidity

mission and temperature

Control and image

Gigabit Ethernet

Client API GenICam compliant

• Signal linear/ DDE

• Automatic/ Manual

• Flip H&V
14-bit 320 × 256 pixels @ 60 Hz

• Signal linear/ DDE

• Temperature linear
GigE Vision and GenICam compatible

Power
TCP, UDP, ICMP, IGMP, DHCP, GigEVision

Digital input/output

Digital input, purpose

Digital input

Digital output, purpose

Digital output

Digital I/O, isolation voltage 500 VRMS

Digital I/O, supply voltage 2–40 VDC, max. 200 mA

Digital I/O, connector type 12-pole M12 connector (shared with Digital syn-

Synchronization in, purpose

Synchronization in

Synchronization in, type LVC Buffer @3.3V, “0” <0.8 V, “1”>2.0 V.

Synchronization out, purpose

Synchronization out

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

General purpose

1× opto-isolated, “0” <1.2 VDC, “1” = 2–25 VDC.

General purpose output to ext. device (program­matically set)

1× opto-isolated, 2–40 VDC, max. 185 mA

chronization and External power)

Frame synchronization in to control camera

1×, non-isolated

Frame synchronization out to control another FLIR
Ax5 camera

1×, non-isolated

68

Technical data13

Digital input/output

Synchronization out, type LVC Buffer @ 3.3V, ”0”=24 MA max, “1”= –24 mA

Digital synchronization, connector type 12-pole M12 connector (shared with Digital I/O

Power system

External power operation 12/24 VDC, < 3.5 W nominal < 6.0 W absolute max.

External power, connector type

Voltage Allowed range 10–30 VDC

Environmental data

Operating temperature range –15°C to +50°C (+5°F to +122°F)

max.

and External power)

12-pole M12 connector (shared with Digital I/O
and Digital Synchronization )

NOTE

The operating temperature range assumes that
the camera is mounted on the base support (in­cluded in the package) or a similar type of
heatsink.

Storage temperature range –40°C to +70°C (–40°F to +158°F)

Humidity (operating and storage) IEC 60068-2-30/24 h 95% relative humidity +25°C

EMC

Encapsulation IP 40 (IEC 60529) with base support mounted

Shock 25 g (IEC 60068-2-27)

Vibration

Physical data

Weight 0.200 kg (0.44 lb.)

Camera size (L × W × H) 106 × 40 × 43 mm (4.2 × 1.6 × 1.7 in.)

Tripod mounting UNC ¼"-20 (on three sides)

Base mounting 4 × M3 thread mounting holes (bottom)

Housing material Magnesium and aluminum

Shipping information

Packaging, type Cardboard box

List of contents

to +40°C (+77°F to +104°F)

• EN 61000-6-2 (Immunity)

• EN 61000-6-3 (Emission)

• FCC 47 CFR Part 15 Class B (Emission)

2 g (IEC 60068-2-6)

• Hard transport case

• Infrared camera with lens

• Base support

• Cable tie (2 ea.)

• Ethernet cable CAT-6, 2m/6.6 ft (2 ea.)

• FLIR ResearchIR Standard 4

• Focus adjustment tool

• Gooseneck

• Mains cable kit (UK,EU,US)

• PoE Injector (power over Ethernet)

• Printed documentation

• Table stand

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

69

Technical data13

Shipping information

Packaging, weight

Packaging, size 370 × 180 × 320 mm (14.6 × 7.1 × 12.6 in.)

EAN-13 7332558010570
UPC-12
Country of origin Sweden

845188011246

Supplies & accessories:

• T951004ACC; Ethernet cable CAT6, 2 m/6.6 ft.

• T198349; Base support

• T198348; Cable kit Mains (UK,EU,US)

• T198392; Table stand kit

• T911183; Gigabit PoE injector 16 W, with multi-plugs

• T127605ACC; Cable M12 Pigtail

• T127606ACC; Cable M12 Sync

• T198594ACC; Transport case Ax5

• T199356; FLIR Ax5 accessory starter kit

• T198584; FLIR Tools

• T198583; FLIR Tools+ (download card incl. license key)

• DSW-10000; FLIR IR Camera Player

• T199233; FLIR Atlas SDK for .NET

• T199234; FLIR Atlas SDK for MATLAB

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

70

Technical data13

13.16 FLIR A35 f=19 mm

P/N: 73319-0101
Rev.: 35207

General description

The FLIR A35 has features and functions that make it the natural choice for anyone who uses PC soft­ware to solve problems and for whom 320 × 256 pixel resolution is sufficient.

Among its main features are GigE Vision and GenICam compliance, which makes it plug-and-play when
used with software packages such as IMAQ Vision and Halcon.

Key features:

• Very affordable.

• Compact (40 mm × 43 mm × 106 mm).

• GigE Vision and GenICam compliant.

• GigE Vision lockable connector.

• PoE (power over Ethernet).

• 8-bit 320 × 256 pixel images streamed at 60 Hz, signal linear.

• 14-bit 320 × 256 pixel images streamed at 60 Hz, signal and temperature linear.

• High frame rates (60 Hz).

• Synchronization between cameras possible.

• 1x+1x GPIO.

• Compliant with any software that supports GenICam, including National Instruments IMAQ Vision,
Stemmers Common Vision Blox, and COGNEX Vision Pro.

Typical applications:

• Automation and thermal machine vision.

• Entry level “high-speed” R&D.

Imaging and optical data

IR resolution 320 × 256 pixels

Thermal sensitivity/NETD < 0.05°C @ +30°C (+86°F) / 50 mK

Field of view (FOV)

Focal length 19 mm (0.75 in.)

Spatial resolution (IFOV) 1.32 mrad

F-number 1.25
Image frequency 60 Hz

Focus Fixed

Detector data

Detector type Focal plane array (FPA), uncooled VOX

Spectral range

Detector pitch 25 µm

Detector time constant Typical 12 ms

Measurement

Object temperature range

Accuracy

25° × 19°

microbolometer

7.5–13 µm

• –25 to +135°C (–13 to 275°F)

• –40 to +550°C (–40 to +1022°F)

±5°C (±9°F) or ±5% of reading

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

71

Technical data13

Measurement analysis

Atmospheric transmission correction Automatic, based on inputs for distance, atmos-

Optics transmission correction Automatic, based on signals from internal sensors

Emissivity correction Variable from 0.5 to 1.0

Reflected apparent temperature correction Automatic, based on input of reflected temperature

External optics/windows correction Automatic, based on input of optics/window trans-

Measurement corrections Global object parameters

Ethernet

Ethernet

Ethernet, type

Ethernet, standard IEEE 802.3

Ethernet, connector type RJ-45

Ethernet, communication GigE Vision ver. 1.2

Ethernet, image streaming 8-bit monochrome @ 60 Hz

Ethernet, power Power over Ethernet, PoE IEEE 802.3af class 0

Ethernet, protocols

pheric temperature and relative humidity

mission and temperature

Control and image

Gigabit Ethernet

Client API GenICam compliant

• Signal linear/ DDE

• Automatic/ Manual

• Flip H&V
14-bit 320 × 256 pixels @ 60 Hz

• Signal linear/ DDE

• Temperature linear
GigE Vision and GenICam compatible

Power
TCP, UDP, ICMP, IGMP, DHCP, GigEVision

Digital input/output

Digital input, purpose

Digital input

Digital output, purpose

Digital output

Digital I/O, isolation voltage 500 VRMS

Digital I/O, supply voltage 2–40 VDC, max. 200 mA

Digital I/O, connector type 12-pole M12 connector (shared with Digital syn-

Synchronization in, purpose

Synchronization in

Synchronization in, type LVC Buffer @3.3V, “0” <0.8 V, “1”>2.0 V.

Synchronization out, purpose

Synchronization out

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

General purpose

1× opto-isolated, “0” <1.2 VDC, “1” = 2–25 VDC.

General purpose output to ext. device (program­matically set)

1× opto-isolated, 2–40 VDC, max. 185 mA

chronization and External power)

Frame synchronization in to control camera

1×, non-isolated

Frame synchronization out to control another FLIR
Ax5 camera

1×, non-isolated

72

Technical data13

Digital input/output

Synchronization out, type LVC Buffer @ 3.3V, ”0”=24 MA max, “1”= –24 mA

Digital synchronization, connector type 12-pole M12 connector (shared with Digital I/O

Power system

External power operation 12/24 VDC, < 3.5 W nominal < 6.0 W absolute max.

External power, connector type

Voltage Allowed range 10–30 VDC

Environmental data

Operating temperature range –15°C to +50°C (+5°F to +122°F)

max.

and External power)

12-pole M12 connector (shared with Digital I/O
and Digital Synchronization )

NOTE

The operating temperature range assumes that
the camera is mounted on the base support (in­cluded in the package) or a similar type of
heatsink.

Storage temperature range –40°C to +70°C (–40°F to +158°F)

Humidity (operating and storage) IEC 60068-2-30/24 h 95% relative humidity +25°C

EMC

Encapsulation IP 40 (IEC 60529) with base support mounted

Shock 25 g (IEC 60068-2-27)

Vibration

Physical data

Weight 0.200 kg (0.44 lb.)

Camera size (L × W × H) 106 × 40 × 43 mm (4.2 × 1.6 × 1.7 in.)

Tripod mounting UNC ¼"-20 (on three sides)

Base mounting 4 × M3 thread mounting holes (bottom)

Housing material Magnesium and aluminum

Shipping information

Packaging, type Cardboard box

List of contents

Packaging, weight

Packaging, size 295 × 200 × 105 mm (11.6 × 7.9 × 4.1 in.)

EAN-13 7332558010587
UPC-12
Country of origin Sweden

to +40°C (+77°F to +104°F)

• EN 61000-6-2 (Immunity)

• EN 61000-6-3 (Emission)

• FCC 47 CFR Part 15 Class B (Emission)

2 g (IEC 60068-2-6)

• Infrared camera with lens

• Base support

• Focus adjustment tool

• Printed documentation

845188011253

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

73

Technical data13

Supplies & accessories:

• T951004ACC; Ethernet cable CAT6, 2 m/6.6 ft.

• T198349; Base support

• T198348; Cable kit Mains (UK,EU,US)

• T198392; Table stand kit

• T911183; Gigabit PoE injector 16 W, with multi-plugs

• T127605ACC; Cable M12 Pigtail

• T127606ACC; Cable M12 Sync

• T198594ACC; Transport case Ax5

• T199356; FLIR Ax5 accessory starter kit

• T198584; FLIR Tools

• T198583; FLIR Tools+ (download card incl. license key)

• DSW-10000; FLIR IR Camera Player

• T199233; FLIR Atlas SDK for .NET

• T199234; FLIR Atlas SDK for MATLAB

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

74

Technical data13

13.17 FLIR A35 FOV 13 (60 Hz, ver. 2016)

P/N: 74335-0101
Rev.: 36981

General description

The FLIR A35 has features and functions that make it the natural choice for anyone who uses PC soft­ware to solve problems and for whom 320 × 256 pixel resolution is sufficient.

Among its main features are GigE Vision and GenICam compliance, which makes it plug-and-play when
used with software packages such as IMAQ Vision and Halcon.

Key features:

• Very affordable.

• Compact

• GigE Vision and GenICam compliant.

• GigE Vision lockable connector.

• PoE (power over Ethernet).

• 8-bit 320 × 256 pixel images streamed at 60 Hz, signal linear.

• 14-bit 320 × 256 pixel images streamed at 60 Hz, signal and temperature linear.

• High frame rates (60 Hz).

• Synchronization between cameras possible.

• 1x+1x GPIO.

• Compliant with any software that supports GenICam, including National Instruments IMAQ Vision,
Stemmers Common Vision Blox, and COGNEX Vision Pro.

Typical applications:

• Automation and thermal machine vision.

• Entry level “high-speed” R&D.

Imaging and optical data

IR resolution 320 × 256 pixels

Thermal sensitivity/NETD < 0.05°C @ +30°C (+86°F) / 50 mK

Field of view (FOV)

Focal length 35 mm (1.38 in.)

Spatial resolution (IFOV)

F-number 1.2
Image frequency 60 Hz

Focus Fixed

Detector data

Detector type Focal plane array (FPA), uncooled VOX

Spectral range

Detector pitch 25 µm

Detector time constant Typical 12 ms

Measurement

Object temperature range

Accuracy ±5°C (±9°F) or ±5% of reading

13° × 10.8°

0.714 mrad

microbolometer

7.5–13 µm

• –25 to +135°C (–13 to 275°F)

• –40 to +550°C (–40 to +1022°F)

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

75

Technical data13

Measurement analysis

Atmospheric transmission correction Automatic, based on inputs for distance, atmos-

Optics transmission correction Automatic, based on signals from internal sensors

Emissivity correction Variable from 0.5 to 1.0

Reflected apparent temperature correction Automatic, based on input of reflected temperature

External optics/windows correction Automatic, based on input of optics/window trans-

Measurement corrections Global object parameters

Ethernet

Ethernet

Ethernet, type

Ethernet, standard IEEE 802.3

Ethernet, connector type RJ-45

Ethernet, communication GigE Vision ver. 1.2

Ethernet, image streaming 8-bit monochrome @ 60 Hz

Ethernet, power Power over Ethernet, PoE IEEE 802.3af class 0

Ethernet, protocols

pheric temperature and relative humidity

mission and temperature

Control and image

Gigabit Ethernet

Client API GenICam compliant

• Signal linear/ DDE

• Automatic/ Manual

• Flip H&V
14-bit 320 × 256 pixels @ 60 Hz

• Signal linear/ DDE

• Temperature linear
GigE Vision and GenICam compatible

Power
TCP, UDP, ICMP, IGMP, DHCP, GigEVision

Digital input/output

Digital input, purpose

Digital input

Digital output, purpose

Digital output

Digital I/O, isolation voltage 500 VRMS

Digital I/O, supply voltage 2–40 VDC, max. 200 mA

Digital I/O, connector type 12-pole M12 connector (shared with Digital syn-

Synchronization in, purpose

Synchronization in

Synchronization in, type LVC Buffer @3.3V, “0” <0.8 V, “1”>2.0 V.

Synchronization out, purpose

Synchronization out

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

General purpose

1× opto-isolated, “0” <1.2 VDC, “1” = 2–25 VDC.

General purpose output to ext. device (program­matically set)

1× opto-isolated, 2–40 VDC, max. 185 mA

chronization and External power)

Frame synchronization in to control camera

1×, non-isolated

Frame synchronization out to control another FLIR
Ax5 camera

1×, non-isolated

76

Technical data13

Digital input/output

Synchronization out, type LVC Buffer @ 3.3V, ”0”=24 MA max, “1”= –24 mA

Digital synchronization, connector type 12-pole M12 connector (shared with Digital I/O

Power system

External power operation 12/24 VDC, < 3.5 W nominal < 6.0 W absolute max.

External power, connector type

Voltage Allowed range 10–30 VDC

Environmental data

Operating temperature range –15°C to +60°C (+5°F to +140°F)

max.

and External power)

12-pole M12 connector (shared with Digital I/O
and Digital Synchronization )

NOTE

The operating temperature range assumes that
the camera is mounted on the base support (in­cluded in the package) or a similar type of
heatsink.

Storage temperature range –40°C to +70°C (–40°F to +158°F)

Humidity (operating and storage) IEC 60068-2-30/24 h 95% relative humidity +25°C

EMC

Encapsulation IP 40 (IEC 60529) with base support mounted

Shock 25 g (IEC 60068-2-27)

Vibration

Physical data

Camera size (L × W × H) 116.8 × 49.6 × 46.6 mm (4.6 × 1.9 × 1.8 in.)

Tripod mounting UNC ¼"-20 (on three sides)

Base mounting 4 × M3 thread mounting holes (bottom)

Housing material Magnesium and aluminum

Shipping information

Packaging, type

List of contents

EAN-13 7332558012291
UPC-12
Country of origin Sweden

to +40°C (+77°F to +104°F)

• EN 61000-6-2 (Immunity)

• EN 61000-6-3 (Emission)

• FCC 47 CFR Part 15 Class B (Emission)

2 g (IEC60068-2-6) and MIL-STD810G

Cardboard box

• Infrared camera with lens

• Base support

• Printed documentation

845188013400

Supplies & accessories:

• T951004ACC; Ethernet cable CAT6, 2 m/6.6 ft.

• T198349; Base support

• T198348; Cable kit Mains (UK,EU,US)

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

77

Technical data13

• T198392; Table stand kit

• T911183; Gigabit PoE injector 16 W, with multi-plugs

• T127605ACC; Cable M12 Pigtail

• T127606ACC; Cable M12 Sync

• T198594ACC; Transport case Ax5

• T199356; FLIR Ax5 accessory starter kit

• T198584; FLIR Tools

• T198583; FLIR Tools+ (download card incl. license key)

• DSW-10000; FLIR IR Camera Player

• T199233; FLIR Atlas SDK for .NET

• T199234; FLIR Atlas SDK for MATLAB

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

78

Technical data13

13.18 FLIR A35 FOV 24 (60 Hz, ver. 2016)

P/N: 74319-0101
Rev.: 36987

General description

The FLIR A35 has features and functions that make it the natural choice for anyone who uses PC soft­ware to solve problems and for whom 320 × 256 pixel resolution is sufficient.

Among its main features are GigE Vision and GenICam compliance, which makes it plug-and-play when
used with software packages such as IMAQ Vision and Halcon.

Key features:

• Very affordable.

• Compact.

• GigE Vision and GenICam compliant.

• GigE Vision lockable connector.

• PoE (power over Ethernet).

• 8-bit 320 × 256 pixel images streamed at 60 Hz, signal linear.

• 14-bit 320 × 256 pixel images streamed at 60 Hz, signal and temperature linear.

• High frame rates (60 Hz).

• Synchronization between cameras possible.

• 1x+1x GPIO.

• Compliant with any software that supports GenICam, including National Instruments IMAQ Vision,
Stemmers Common Vision Blox, and COGNEX Vision Pro.

Typical applications:

• Automation and thermal machine vision.

• Entry level “high-speed” R&D.

Imaging and optical data

IR resolution 320 × 256 pixels

Thermal sensitivity/NETD < 0.05°C @ +30°C (+86°F) / 50 mK

Field of view (FOV)

Focal length 19 mm (0.75 in.)

Spatial resolution (IFOV)

F-number 1.25
Image frequency 60 Hz

Focus Fixed

Detector data

Detector type Focal plane array (FPA), uncooled VOX

Spectral range

Detector pitch 25 µm

Detector time constant Typical 12 ms

Measurement

Object temperature range

Accuracy ±5°C (±9°F) or ±5% of reading

24° × 19.2°

1.32 mrad

microbolometer

7.5–13 µm

• –25 to +135°C (–13 to 275°F)

• –40 to +550°C (–40 to +1022°F)

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

79

Technical data13

Measurement analysis

Atmospheric transmission correction Automatic, based on inputs for distance, atmos-

Optics transmission correction Automatic, based on signals from internal sensors

Emissivity correction Variable from 0.5 to 1.0

Reflected apparent temperature correction Automatic, based on input of reflected temperature

External optics/windows correction Automatic, based on input of optics/window trans-

Measurement corrections Global object parameters

Ethernet

Ethernet

Ethernet, type

Ethernet, standard IEEE 802.3

Ethernet, connector type RJ-45

Ethernet, communication GigE Vision ver. 1.2

Ethernet, image streaming 8-bit monochrome @ 60 Hz

Ethernet, power Power over Ethernet, PoE IEEE 802.3af class 0

Ethernet, protocols

pheric temperature and relative humidity

mission and temperature

Control and image

Gigabit Ethernet

Client API GenICam compliant

• Signal linear/ DDE

• Automatic/ Manual

• Flip H&V
14-bit 320 × 256 pixels @ 60 Hz

• Signal linear/ DDE

• Temperature linear
GigE Vision and GenICam compatible

Power
TCP, UDP, ICMP, IGMP, DHCP, GigEVision

Digital input/output

Digital input, purpose

Digital input

Digital output, purpose

Digital output

Digital I/O, isolation voltage 500 VRMS

Digital I/O, supply voltage 2–40 VDC, max. 200 mA

Digital I/O, connector type 12-pole M12 connector (shared with Digital syn-

Synchronization in, purpose

Synchronization in

Synchronization in, type LVC Buffer @3.3V, “0” <0.8 V, “1”>2.0 V.

Synchronization out, purpose

Synchronization out

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

General purpose

1× opto-isolated, “0” <1.2 VDC, “1” = 2–25 VDC.

General purpose output to ext. device (program­matically set)

1× opto-isolated, 2–40 VDC, max. 185 mA

chronization and External power)

Frame synchronization in to control camera

1×, non-isolated

Frame synchronization out to control another FLIR
Ax5 camera

1×, non-isolated

80

Technical data13

Digital input/output

Synchronization out, type LVC Buffer @ 3.3V, ”0”=24 MA max, “1”= –24 mA

Digital synchronization, connector type 12-pole M12 connector (shared with Digital I/O

Power system

External power operation 12/24 VDC, < 3.5 W nominal < 6.0 W absolute max.

External power, connector type

Voltage Allowed range 10–30 VDC

Environmental data

Operating temperature range –15°C to +60°C (+5°F to +140°F)

max.

and External power)

12-pole M12 connector (shared with Digital I/O
and Digital Synchronization )

NOTE

The operating temperature range assumes that
the camera is mounted on the base support (in­cluded in the package) or a similar type of
heatsink.

Storage temperature range –40°C to +70°C (–40°F to +158°F)

Humidity (operating and storage) IEC 60068-2-30/24 h 95% relative humidity +25°C

EMC

Encapsulation IP 40 (IEC 60529) with base support mounted

Shock 25 g (IEC 60068-2-27)

Vibration

Physical data

Camera size (L × W × H) 104.1 × 49.6 × 46.6 mm (4.1 × 1.9 × 1.8 in.)

Tripod mounting UNC ¼"-20 (on three sides)

Base mounting 4 × M3 thread mounting holes (bottom)

Housing material Magnesium and aluminum

Shipping information

Packaging, type

List of contents

EAN-13 7332558011096
UPC-12
Country of origin Sweden

to +40°C (+77°F to +104°F)

• EN 61000-6-2 (Immunity)

• EN 61000-6-3 (Emission)

• FCC 47 CFR Part 15 Class B (Emission)

2 g (IEC60068-2-6) and MIL-STD810G

Cardboard box

• Infrared camera with lens

• Base support

• Focus adjustment tool

• Printed documentation

845188011963

Supplies & accessories:

• T951004ACC; Ethernet cable CAT6, 2 m/6.6 ft.

• T198349; Base support

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

81

Technical data13

• T198348; Cable kit Mains (UK,EU,US)

• T198392; Table stand kit

• T911183; Gigabit PoE injector 16 W, with multi-plugs

• T127605ACC; Cable M12 Pigtail

• T127606ACC; Cable M12 Sync

• T198342ACC; Focus adjustment tool

• T198594ACC; Transport case Ax5

• T199356; FLIR Ax5 accessory starter kit

• T198584; FLIR Tools

• T198583; FLIR Tools+ (download card incl. license key)

• DSW-10000; FLIR IR Camera Player

• T199233; FLIR Atlas SDK for .NET

• T199234; FLIR Atlas SDK for MATLAB

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

82

Technical data13

13.19 FLIR A35 FOV 48 (60 Hz, ver. 2016)

P/N: 74309-0101
Rev.: 36996

General description

The FLIR A35 has features and functions that make it the natural choice for anyone who uses PC soft­ware to solve problems and for whom 320 × 256 pixel resolution is sufficient.

Among its main features are GigE Vision and GenICam compliance, which makes it plug-and-play when
used with software packages such as IMAQ Vision and Halcon.

Key features:

• Very affordable.

• Compact

• GigE Vision and GenICam compliant.

• GigE Vision lockable connector.

• PoE (power over Ethernet).

• 8-bit 320 × 256 pixel images streamed at 60 Hz, signal linear.

• 14-bit 320 × 256 pixel images streamed at 60 Hz, signal and temperature linear.

• High frame rates (60 Hz).

• Synchronization between cameras possible.

• 1x+1x GPIO.

• Compliant with any software that supports GenICam, including National Instruments IMAQ Vision,
Stemmers Common Vision Blox, and COGNEX Vision Pro.

Typical applications:

• Automation and thermal machine vision.

• Entry level “high-speed” R&D.

Imaging and optical data

IR resolution 320 × 256 pixels

Thermal sensitivity/NETD < 0.05°C @ +30°C (+86°F) / 50 mK

Field of view (FOV)

Focal length 9 mm (0.35 in.)

Spatial resolution (IFOV)

F-number 1.25
Image frequency 60 Hz

Focus Fixed

Detector data

Detector type Focal plane array (FPA), uncooled VOX

Spectral range

Detector pitch 25 µm

Detector time constant Typical 12 ms

Measurement

Object temperature range

Accuracy ±5°C (±9°F) or ±5% of reading

48° × 39°

2.78 mrad

microbolometer

7.5–13 µm

• –25 to +135°C (–13 to 275°F)

• –40 to +550°C (–40 to +1022°F)

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

83

Technical data13

Measurement analysis

Atmospheric transmission correction Automatic, based on inputs for distance, atmos-

Optics transmission correction Automatic, based on signals from internal sensors

Emissivity correction Variable from 0.5 to 1.0

Reflected apparent temperature correction Automatic, based on input of reflected temperature

External optics/windows correction Automatic, based on input of optics/window trans-

Measurement corrections Global object parameters

Ethernet

Ethernet

Ethernet, type

Ethernet, standard IEEE 802.3

Ethernet, connector type RJ-45

Ethernet, communication GigE Vision ver. 1.2

Ethernet, image streaming 8-bit monochrome @ 60 Hz

Ethernet, power Power over Ethernet, PoE IEEE 802.3af class 0

Ethernet, protocols

pheric temperature and relative humidity

mission and temperature

Control and image

Gigabit Ethernet

Client API GenICam compliant

• Signal linear/ DDE

• Automatic/ Manual

• Flip H&V
14-bit 320 × 256 pixels @ 60 Hz

• Signal linear/ DDE

• Temperature linear
GigE Vision and GenICam compatible

Power
TCP, UDP, ICMP, IGMP, DHCP, GigEVision

Digital input/output

Digital input, purpose

Digital input

Digital output, purpose

Digital output

Digital I/O, isolation voltage 500 VRMS

Digital I/O, supply voltage 2–40 VDC, max. 200 mA

Digital I/O, connector type 12-pole M12 connector (shared with Digital syn-

Synchronization in, purpose

Synchronization in

Synchronization in, type LVC Buffer @3.3V, “0” <0.8 V, “1”>2.0 V.

Synchronization out, purpose

Synchronization out

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

General purpose

1× opto-isolated, “0” <1.2 VDC, “1” = 2–25 VDC.

General purpose output to ext. device (program­matically set)

1× opto-isolated, 2–40 VDC, max. 185 mA

chronization and External power)

Frame synchronization in to control camera

1×, non-isolated

Frame synchronization out to control another FLIR
Ax5 camera

1×, non-isolated

84

Technical data13

Digital input/output

Synchronization out, type LVC Buffer @ 3.3V, ”0”=24 MA max, “1”= –24 mA

Digital synchronization, connector type 12-pole M12 connector (shared with Digital I/O

Power system

External power operation 12/24 VDC, < 3.5 W nominal < 6.0 W absolute max.

External power, connector type

Voltage Allowed range 10–30 VDC

Environmental data

Operating temperature range –15°C to +60°C (+5°F to +140°F)

max.

and External power)

12-pole M12 connector (shared with Digital I/O
and Digital Synchronization )

NOTE

The operating temperature range assumes that
the camera is mounted on the base support (in­cluded in the package) or a similar type of
heatsink.

Storage temperature range –40°C to +70°C (–40°F to +158°F)

Humidity (operating and storage) IEC 60068-2-30/24 h 95% relative humidity +25°C

EMC

Encapsulation IP 40 (IEC 60529) with base support mounted

Shock 25 g (IEC 60068-2-27)

Vibration

Physical data

Camera size (L × W × H) 104.1 × 49.6 × 46.6 mm (4.1 × 1.9 × 1.8 in.)

Tripod mounting UNC ¼"-20 (on three sides)

Base mounting 4 × M3 thread mounting holes (bottom)

Housing material Magnesium and aluminum

Shipping information

Packaging, type

List of contents

EAN-13 7332558011089
UPC-12
Country of origin Sweden

to +40°C (+77°F to +104°F)

• EN 61000-6-2 (Immunity)

• EN 61000-6-3 (Emission)

• FCC 47 CFR Part 15 Class B (Emission)

2 g (IEC60068-2-6) and MIL-STD810G

Cardboard box

• Infrared camera with lens

• Base support

• Focus adjustment tool

• Printed documentation

845188011956

Supplies & accessories:

• T951004ACC; Ethernet cable CAT6, 2 m/6.6 ft.

• T198349; Base support

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

85

Technical data13

• T198348; Cable kit Mains (UK,EU,US)

• T198392; Table stand kit

• T911183; Gigabit PoE injector 16 W, with multi-plugs

• T127605ACC; Cable M12 Pigtail

• T127606ACC; Cable M12 Sync

• T198342ACC; Focus adjustment tool

• T198594ACC; Transport case Ax5

• T199356; FLIR Ax5 accessory starter kit

• T198584; FLIR Tools

• T198583; FLIR Tools+ (download card incl. license key)

• DSW-10000; FLIR IR Camera Player

• T199233; FLIR Atlas SDK for .NET

• T199234; FLIR Atlas SDK for MATLAB

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

86

Technical data13

13.20 FLIR A35 FOV 63 (60 Hz, ver. 2016)

P/N: 74307-0101
Rev.: 36995

General description

The FLIR A35 has features and functions that make it the natural choice for anyone who uses PC soft­ware to solve problems and for whom 320 × 256 pixel resolution is sufficient.

Among its main features are GigE Vision and GenICam compliance, which makes it plug-and-play when
used with software packages such as IMAQ Vision and Halcon.

Key features:

• Very affordable.

• Compact.

• GigE Vision and GenICam compliant.

• GigE Vision lockable connector.

• PoE (power over Ethernet).

• 8-bit 320 × 256 pixel images streamed at 60 Hz, signal linear.

• 14-bit 320 × 256 pixel images streamed at 60 Hz, signal and temperature linear.

• High frame rates (60 Hz).

• Synchronization between cameras possible.

• 1x+1x GPIO.

• Compliant with any software that supports GenICam, including National Instruments IMAQ Vision,
Stemmers Common Vision Blox, and COGNEX Vision Pro.

Typical applications:

• Automation and thermal machine vision.

• Entry level “high-speed” R&D.

Imaging and optical data

IR resolution 320 × 256 pixels

Thermal sensitivity/NETD < 0.05°C @ +30°C (+86°F) / 50 mK

Field of view (FOV)

Focal length 7.5 mm (0.30 in.)

Spatial resolution (IFOV) 3.33 mrad

F-number 1.4
Image frequency 60 Hz

Focus Fixed

Detector data

Detector type Focal plane array (FPA), uncooled VOX

Spectral range

Detector pitch 25 µm

Detector time constant Typical 12 ms

Measurement

Object temperature range

Accuracy

63° × 50°

microbolometer

7.5–13 µm

• –25 to +135°C (–13 to 275°F)

• –40 to +550°C (–40 to +1022°F)

±5°C (±9°F) or ±5% of reading

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

87

Technical data13

Measurement analysis

Atmospheric transmission correction Automatic, based on inputs for distance, atmos-

Optics transmission correction Automatic, based on signals from internal sensors

Emissivity correction Variable from 0.5 to 1.0

Reflected apparent temperature correction Automatic, based on input of reflected temperature

External optics/windows correction Automatic, based on input of optics/window trans-

Measurement corrections Global object parameters

Ethernet

Ethernet

Ethernet, type

Ethernet, standard IEEE 802.3

Ethernet, connector type RJ-45

Ethernet, communication GigE Vision ver. 1.2

Ethernet, image streaming 8-bit monochrome @ 60 Hz

Ethernet, power Power over Ethernet, PoE IEEE 802.3af class 0

Ethernet, protocols

pheric temperature and relative humidity

mission and temperature

Control and image

Gigabit Ethernet

Client API GenICam compliant

• Signal linear/ DDE

• Automatic/ Manual

• Flip H&V
14-bit 320 × 256 pixels @ 60 Hz

• Signal linear/ DDE

• Temperature linear
GigE Vision and GenICam compatible

Power
TCP, UDP, ICMP, IGMP, DHCP, GigEVision

Digital input/output

Digital input, purpose

Digital input

Digital output, purpose

Digital output

Digital I/O, isolation voltage 500 VRMS

Digital I/O, supply voltage 2–40 VDC, max. 200 mA

Digital I/O, connector type 12-pole M12 connector (shared with Digital syn-

Synchronization in, purpose

Synchronization in

Synchronization in, type LVC Buffer @3.3V, “0” <0.8 V, “1”>2.0 V.

Synchronization out, purpose

Synchronization out

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

General purpose

1× opto-isolated, “0” <1.2 VDC, “1” = 2–25 VDC.

General purpose output to ext. device (program­matically set)

1× opto-isolated, 2–40 VDC, max. 185 mA

chronization and External power)

Frame synchronization in to control camera

1×, non-isolated

Frame synchronization out to control another FLIR
Ax5 camera

1×, non-isolated

88

Technical data13

Digital input/output

Synchronization out, type LVC Buffer @ 3.3V, ”0”=24 MA max, “1”= –24 mA

Digital synchronization, connector type 12-pole M12 connector (shared with Digital I/O

Power system

External power operation 12/24 VDC, < 3.5 W nominal < 6.0 W absolute max.

External power, connector type

Voltage Allowed range 10–30 VDC

Environmental data

Operating temperature range –15°C to +60°C (+5°F to +140°F)

max.

and External power)

12-pole M12 connector (shared with Digital I/O
and Digital Synchronization )

NOTE

The operating temperature range assumes that
the camera is mounted on the base support (in­cluded in the package) or a similar type of
heatsink.

Storage temperature range –40°C to +70°C (–40°F to +158°F)

Humidity (operating and storage) IEC 60068-2-30/24 h 95% relative humidity +25°C

EMC

Encapsulation IP 40 (IEC 60529) with base support mounted

Shock 25 g (IEC 60068-2-27)

Vibration

Physical data

Camera size (L × W × H) 104.1 × 49.6 × 46.6 mm (4.1 × 1.9 × 1.8 in.)

Tripod mounting UNC ¼"-20 (on three sides)

Base mounting 4 × M3 thread mounting holes (bottom)

Housing material Magnesium and aluminum

Shipping information

Packaging, type

List of contents

EAN-13 7332558011614
UPC-12
Country of origin Sweden

to +40°C (+77°F to +104°F)

• EN 61000-6-2 (Immunity)

• EN 61000-6-3 (Emission)

• FCC 47 CFR Part 15 Class B (Emission)

2 g (IEC60068-2-6) and MIL-STD810G

Cardboard box

• Infrared camera with lens

• Base support

• Focus adjustment tool

• Printed documentation

845188012564

Supplies & accessories:

• T951004ACC; Ethernet cable CAT6, 2 m/6.6 ft.

• T198349; Base support

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

89

Technical data13

• T198348; Cable kit Mains (UK,EU,US)

• T198392; Table stand kit

• T911183; Gigabit PoE injector 16 W, with multi-plugs

• T127605ACC; Cable M12 Pigtail

• T127606ACC; Cable M12 Sync

• T198342ACC; Focus adjustment tool

• T198594ACC; Transport case Ax5

• T199356; FLIR Ax5 accessory starter kit

• T198584; FLIR Tools

• T198583; FLIR Tools+ (download card incl. license key)

• DSW-10000; FLIR IR Camera Player

• T199233; FLIR Atlas SDK for .NET

• T199234; FLIR Atlas SDK for MATLAB

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

90

Technical data13

13.21 FLIR A35 FOV 7.6 (60 Hz, ver. 2016)

P/N: 74360-0101
Rev.: 36997

General description

The FLIR A35 has features and functions that make it the natural choice for anyone who uses PC soft­ware to solve problems and for whom 320 × 256 pixel resolution is sufficient.

Among its main features are GigE Vision and GenICam compliance, which makes it plug-and-play when
used with software packages such as IMAQ Vision and Halcon.

Key features:

• Very affordable.

• Compact

• GigE Vision and GenICam compliant.

• GigE Vision lockable connector.

• PoE (power over Ethernet).

• 8-bit 320 × 256 pixel images streamed at 60 Hz, signal linear.

• 14-bit 320 × 256 pixel images streamed at 60 Hz, signal and temperature linear.

• High frame rates (60 Hz).

• Synchronization between cameras possible.

• 1x+1x GPIO.

• Compliant with any software that supports GenICam, including National Instruments IMAQ Vision,
Stemmers Common Vision Blox, and COGNEX Vision Pro.

Typical applications:

• Automation and thermal machine vision.

• Entry level “high-speed” R&D.

Imaging and optical data

IR resolution 320 × 256 pixels

Thermal sensitivity/NETD < 0.05°C @ +30°C (+86°F) / 50 mK

Field of view (FOV)

Focal length 60 mm (2.36 in.)

Spatial resolution (IFOV)

F-number 1.25
Image frequency 60 Hz

Focus Fixed

Detector data

Detector type Focal plane array (FPA), uncooled VOX

Spectral range

Detector pitch 25 µm

Detector time constant Typical 12 ms

Measurement

Object temperature range

Accuracy ±5°C (±9°F) or ±5% of reading

7.6° × 6.08°

0.417 mrad

microbolometer

7.5–13 µm

• –25 to +135°C (–13 to 275°F)

• –40 to +550°C (–40 to +1022°F)

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

91

Technical data13

Measurement analysis

Atmospheric transmission correction Automatic, based on inputs for distance, atmos-

Optics transmission correction Automatic, based on signals from internal sensors

Emissivity correction Variable from 0.5 to 1.0

Reflected apparent temperature correction Automatic, based on input of reflected temperature

External optics/windows correction Automatic, based on input of optics/window trans-

Measurement corrections Global object parameters

Ethernet

Ethernet

Ethernet, type

Ethernet, standard IEEE 802.3

Ethernet, connector type RJ-45

Ethernet, communication GigE Vision ver. 1.2

Ethernet, image streaming 8-bit monochrome @ 60 Hz

Ethernet, power Power over Ethernet, PoE IEEE 802.3af class 0

Ethernet, protocols

pheric temperature and relative humidity

mission and temperature

Control and image

Gigabit Ethernet

Client API GenICam compliant

• Signal linear/ DDE

• Automatic/ Manual

• Flip H&V
14-bit 320 × 256 pixels @ 60 Hz

• Signal linear/ DDE

• Temperature linear
GigE Vision and GenICam compatible

Power
TCP, UDP, ICMP, IGMP, DHCP, GigEVision

Digital input/output

Digital input, purpose

Digital input

Digital output, purpose

Digital output

Digital I/O, isolation voltage 500 VRMS

Digital I/O, supply voltage 2–40 VDC, max. 200 mA

Digital I/O, connector type 12-pole M12 connector (shared with Digital syn-

Synchronization in, purpose

Synchronization in

Synchronization in, type LVC Buffer @3.3V, “0” <0.8 V, “1”>2.0 V.

Synchronization out, purpose

Synchronization out

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

General purpose

1× opto-isolated, “0” <1.2 VDC, “1” = 2–25 VDC.

General purpose output to ext. device (program­matically set)

1× opto-isolated, 2–40 VDC, max. 185 mA

chronization and External power)

Frame synchronization in to control camera

1×, non-isolated

Frame synchronization out to control another FLIR
Ax5 camera

1×, non-isolated

92

Technical data13

Digital input/output

Synchronization out, type LVC Buffer @ 3.3V, ”0”=24 MA max, “1”= –24 mA

Digital synchronization, connector type 12-pole M12 connector (shared with Digital I/O

Power system

External power operation 12/24 VDC, < 3.5 W nominal < 6.0 W absolute max.

External power, connector type

Voltage Allowed range 10–30 VDC

Environmental data

Operating temperature range –15°C to +60°C (+5°F to +140°F)

max.

and External power)

12-pole M12 connector (shared with Digital I/O
and Digital Synchronization )

NOTE

The operating temperature range assumes that
the camera is mounted on the base support (in­cluded in the package) or a similar type of
heatsink.

Storage temperature range –40°C to +70°C (–40°F to +158°F)

Humidity (operating and storage) IEC 60068-2-30/24 h 95% relative humidity +25°C

EMC

Encapsulation IP 40 (IEC 60529) with base support mounted

Shock 25 g (IEC 60068-2-27)

Vibration

Physical data

Camera size (L × W × H) 141.2 × 61.4 × 61.4 mm (5.6 × 2.4 × 2.4 in.)

Tripod mounting UNC ¼"-20 (on three sides)

Base mounting 4 × M3 thread mounting holes (bottom)

Housing material Magnesium and aluminum

Shipping information

Packaging, type

List of contents

EAN-13 7332558012307
UPC-12
Country of origin Sweden

to +40°C (+77°F to +104°F)

• EN 61000-6-2 (Immunity)

• EN 61000-6-3 (Emission)

• FCC 47 CFR Part 15 Class B (Emission)

2 g (IEC60068-2-6) and MIL-STD810G

Cardboard box

• Infrared camera with lens

• Base support

• Printed documentation

845188013417

Supplies & accessories:

• T951004ACC; Ethernet cable CAT6, 2 m/6.6 ft.

• T198349; Base support

• T198348; Cable kit Mains (UK,EU,US)

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

93

Technical data13

• T198392; Table stand kit

• T911183; Gigabit PoE injector 16 W, with multi-plugs

• T127605ACC; Cable M12 Pigtail

• T127606ACC; Cable M12 Sync

• T198594ACC; Transport case Ax5

• T199356; FLIR Ax5 accessory starter kit

• T198584; FLIR Tools

• T198583; FLIR Tools+ (download card incl. license key)

• DSW-10000; FLIR IR Camera Player

• T199233; FLIR Atlas SDK for .NET

• T199234; FLIR Atlas SDK for MATLAB

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

94

Technical data13

13.22 FLIR A65 f=13 mm with SC kit (7.5 Hz)

P/N: 73513-0102
Rev.: 35207

General description

The FLIR A65 has features and functions that make it the natural choice for anyone who uses PC soft­ware to solve problems and for whom 640 × 512 pixel resolution is sufficient.

Among its main features are GigE Vision and GenICam compliance, which makes it plug-and-play when
used with software packages such as IMAQ Vision and Halcon.

Key features:

• Very affordable.

• Compact (40 mm × 43 mm × 106 mm).

• GigE Vision and GenICam compliant.

• GigE Vision lockable connector.

• PoE (power over Ethernet).

• 8-bit 640 × 512 pixel images streamed at 7.5 Hz, signal linear

• 14-bit 640 × 512 pixel images streamed at 7.5 Hz, signal and temperature linear

• Synchronization between cameras possible.

• 1x+1x GPIO.

• Compliant with any software that supports GenICam, including National Instruments IMAQ Vision,
Stemmers Common Vision Blox, and COGNEX Vision Pro.

Typical applications:

• Automation and thermal machine vision.

• Entry level “high-speed” R&D.

Imaging and optical data

IR resolution 640 × 512 pixels

Thermal sensitivity/NETD < 0.05°C @ +30°C (+86°F) / 50 mK

Field of view (FOV)

Focal length 13 mm (0.5 in.)

Spatial resolution (IFOV)

F-number 1.25
Image frequency 7.5 Hz

Focus Fixed

Detector data

Detector type Focal plane array (FPA), uncooled VOX

Spectral range

Detector pitch 17 µm

Detector time constant Typical 12 ms

Measurement

Object temperature range

Accuracy ±5°C (±9°F) or ±5% of reading

45° × 37°

1.31 mrad

microbolometer

7.5–13 µm

• –25 to +135°C (–13 to 275°F)

• –40 to +550°C (–40 to +1022°F)

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

95

Technical data13

Measurement analysis

Atmospheric transmission correction Automatic, based on inputs for distance, atmos-

Optics transmission correction Automatic, based on signals from internal sensors

Emissivity correction Variable from 0.5 to 1.0

Reflected apparent temperature correction Automatic, based on input of reflected temperature

External optics/windows correction Automatic, based on input of optics/window trans-

Measurement corrections Global object parameters

Ethernet

Ethernet

Ethernet, type

Ethernet, standard IEEE 802.3

Ethernet, connector type RJ-45

Ethernet, communication GigE Vision ver. 1.2

Ethernet, image streaming 8-bit monochrome @ 7.5 Hz

Ethernet, power Power over Ethernet, PoE IEEE 802.3af class 0

Ethernet, protocols

pheric temperature and relative humidity

mission and temperature

Control and image

Gigabit Ethernet

Client API GenICam compliant

• Signal linear/ DDE

• Automatic/ Manual

• Flip H&V
14-bit 640 × 512 pixels @ 7.5 Hz

• Signal linear/ DDE

• Temperature linear
GigE Vision and GenICam compatible

Power
TCP, UDP, ICMP, IGMP, DHCP, GigEVision

Digital input/output

Digital input, purpose

Digital input

Digital output, purpose

Digital output

Digital I/O, isolation voltage 500 VRMS

Digital I/O, supply voltage 2–40 VDC, max. 200 mA

Digital I/O, connector type 12-pole M12 connector (shared with Digital syn-

Synchronization in, purpose

Synchronization in

Synchronization in, type LVC Buffer @3.3V, “0” <0.8 V, “1”>2.0 V.

Synchronization out, purpose

Synchronization out

#T559770; r. AI/37003/37003; en-US

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

General purpose

1× opto-isolated, “0” <1.2 VDC, “1” = 2–25 VDC.

General purpose output to ext. device (program­matically set)

1× opto-isolated, 2–40 VDC, max. 185 mA

chronization and External power)

Frame synchronization in to control camera

1×, non-isolated

Frame synchronization out to control another FLIR
Ax5 camera

1×, non-isolated

96