![](/html/bc/bc24/bc2460d573c320d70a33a1e66a2601a67e6f637ff0a4f4c307379b16ae6d3533/bg1.png)
MSX® THERMAL CAMERA
FLIR TG165-X
™
The FLIR TG165-X dramatically reduces inspection and
diagnostic time by helping you visually pinpoint the source
of electrical, mechanical, and HVAC/R system faults. Instead
of searching for temperature anomalies with a single-spot
IR thermometer, this non-contact temperature
measurement and imaging tool displays a thermal picture
of your target including any hot spots or cold zones that
could indicate a problem. See wires or components clearly
and even read labels thanks to FLIR patented MSX image
enhancement, which adds visual details to full thermal
images. The bullseye laser helps ensure you’re always
targeting the right component for measurement while
the drop-tested, portable design with easy-to-use
buttons and settings help you complete the job quickly
and stress-free. With internal storage for up to 50,000
images and rechargeable Li-ion battery, the FLIR TG165-X
is ready to go right out of the box.
PINPOINT THE SOURCE
OF SYSTEM FAILURES
Troubleshoot electrical, mechanical, and building issues
with this handheld thermal imager
• See temperature anomalies immediately in the
thermal image instead of searching for them with
a single-spot IR thermometer
• Speed inspections with a thermal view that tells
you instantly whether a target has overheating
components or hidden air leaks
• Measure a wide range of temperatures, from
-25°C to 300°C (-13°F to 572°F), with an accuracy
of up to ±1.5°C (±3°F)
COMPLETE INSPECTIONS
QUICKLY & EASILY
See the detail needed to troubleshoot faults and
gauge their severity
• Interpret images faster and easier with MSX®
two-camera technology, which enhances thermal
images with crisp visual details
• Identify the exact area that you’re measuring
using the bullseye laser pointer
• Capture thermal MSX or visual images plus
temperature readings with a simple trigger-pull
• Demonstrate the problem was found and
corrected with recorded before-and-after images
WORK WITH CONFIDENCE
Take the TG165-X anywhere thanks to its portable
design and protective IP54 enclosure
• Work safely and worry-free knowing that the
thermal imager can withstand a 2-meter drop
• See into dark or hard-to-reach areas with the
bright LED worklight
• Easily view live thermal or recorded images on
2.4-in. display
• Rely on the security of the world-class
FLIR 2-10 warranty
![](/html/bc/bc24/bc2460d573c320d70a33a1e66a2601a67e6f637ff0a4f4c307379b16ae6d3533/bg2.png)
SPECIFICATIONS
Imaging and optical data
IR resolution 80 × 60 pixels
Digital image enhancement No
Thermal sensitivity/NETD <70 mK
Field of view (FOV) 51° × 66°
Minimum focus distance 0.3 m (0.98 ft)
Distance to spot ratio 24:1
Pseudo dual range No
Image frequency 8.7 Hz
Focus Fixed
Detector data
Focal plane array/spectral range Uncooled microbolometer/7.5–14 µm
Detector pitch 17 μm
Image presentation
Display resolution 3 20 × 240 pixels
Screen 2.4 in. portrait, 80° viewing angle
Image adjustment Au tomatic
Image modes
Gallery Yes
• MSX ® (Multi Spectral Dynamic Imaging)
• Visual (with temperature reading)
Measurement and analysis
Object temperature range -25°C to 300°C (-13°F to 5 72°F)
Accuracy
Minimum measurement distance 0.26 m (0.8 5 ft.)
Spotmeter Center spot on/o
Color palettes Iron, Rainbow, Whitehot, Blackhot, Ar ctic, Lava
• 50 °C to 100°C (122°F to 212°F) - acc. of ±1.5°C (±3°F)
• 0°C to 50°C/100°C to 30 0°C (32°F to 122°F/212°F to
572° F) - acc. of ± 2.5°C (±5°F)
• -25°C to 0°C (-13°F to 32°F) - acc. of ±3°C (±7°F)
Set-up
Set-up c ommands • Local adaptation of units, language, date, and time
Emissivity correction Yes: 4 pre-set levels with custom adjustment of 0.1–0.99
formats
• Screen brightness (high, medium, low)
• Galler y, deletion of images
Storage of images
Storage media 4 GB
Image storage capacity 50,0 00 images
Image file format JPEG with spot temp in meta tag
Digital camera
Resolution 2 MP (1600 × 1200 pixels)
Focus Fixed
Field of view 71° × 56°, adapts to the IR lens
Worklight and Laser
Worklight LED on /o
Light ou tput 100 lumens
Bullseye laser pointer Indicating t he size of the measurement area
Laser t ype Class 1
Data communication interfaces
Interfaces US B 2.0
USB standard USB Type -C High Speed; data transfer/power
Power system
Battery type Rechargeable Li-ion, 3.7 V bat tery
Battery operating time 5 hours of scanning (LC M medium brightness)
4.5 hour s with laser on (LCM medium brightness)
Battery charge life 30 days minimum
Charging system Battery is charged inside the camera; 4 hrs to 90%,
6 hrs. to 100%
Power management Adjust able: o, 5 minutes, 15 minutes, 30 minutes
General
Operating temperature range -10°C to 45°C (14°F to 113°F)
Encapsulation IP54 (IEC60529)
Shock 25 g (IEC 60068-2-27)
Vibration 2 g (IEC 60068-2-6)
Drop test Designed for 2 m (6.56 f t.)
Safety CE/CB/EN61010/UL
Weight 0.394 kg (13.9 oz)
Size (L × W × H) 210 × 64 × 81 mm (8.3 × 2.5 × 3.2 in)
Tripod moun ting UNC ¼”-20
Country of origin Taiw an
Specifications are subject to change without notice.
Equipment described herein is subject to US export
regulations and may require a license prior to export.
Diversion contrary to US law is prohibited. Imagery for
illustration purposes only. ©2020 FLIR Systems, Inc. All
rights reserved. 5/2020
20-0707-INS-USL