BALL PROBE MOISTURE METER
WITH BLUETOOTH®
FLIR MR59
™
The MR59 is an aordable pinless meter for professionals
in moisture remediation, pest control, home or building
inspection, and floor installation. It is a high-quality,
reliable, and easy-to-use moisture-detection tool. Wireless
connectivity makes it easy to view readings on a mobile
device from the FLIR Tools® Mobile app when the meter’s
display is out of view. Thanks to the ball-probe sensor, the
user can cover a large area in a short time without making
a mark; measure into corners, over uneven surfaces,
and around baseboards; and detect problems below the
surface. The MR59 is a reliable standalone meter—or a
useful accessory to pair with a FLIR thermal imager.
LOCATE HIDDEN
MOISTURE EFFICIENTLY
Survey large areas quickly and non-destructively
• Easily run the meter over and around objects on the
measuring surface with the ball-probe sensor
• Create a heat map of the affected area and follow
the migration path to a hidden source of moisture
• Identif y potential moisture problems up
to 100 mm (4 in) below the surface
INSPECT ANYWHERE
WITH EASE
Designed to make your job easier and more efficient
• Wirelessly connect the meter to FLIR Tools
Mobile to view readings on a mobile device
• Work in dim lighting with the backlit
display and bright worklight
• Use with the MR04 extension pole to reduce the need
for a ladder, or to optimize ergonomics for ‘high’ and
‘low’ measuring targets (accessory not included)
RELY ON THIS METER
TO GET THE JOB DONE
Take the durable, drop-tested meter to every job
• Detect moisture in a wide range of
common building materials
• Receive stable, repeatable readings. The
meter’s handgrip is designed to prevent hands
from interfering with measurements
• Take advantage of product enhancements
by upgrading rmware as needed via micro
USB por t (located in bat tery compartment)
SPECIFICATIONS
Moisture Measurement Range Accuracy
Moisture 0 - 100% Relative measurement
Measurement
Detection Depth
General Information
Connectivity Bluetooth BLE
Worklight White LED
Display Backlit, multifunction LCD
Measurement Principle Capacitive (non-invasive)
Warranty Limited 3 years
Batte ry Type 9 V battery
Battery L ife Typical 4 0 hours without worklight
Battery Status Indicator 4-bar battery icon (100% to emp ty)
Auto Power Of f (APO) After 30 minutes
Operating RH/Temperature 90%, 0°C to 30°C (32°F to 86°F)
IP Rating IP40
Safety Compliance CE, RCM, FCC/IC
Drop Te st 2 m (6.6 ft)
Housing Material Impact-resistant plastic
Weight 245 g (8.6 oz)
Dimensions 24 0.5 x 67 x 38 mm (9.5 x 2.6 x 1.5 in)
Up to 100 mm (4 in) depending upon material under test
Communications Protocol: METERLiNK
®
75%, 30°C to 40 °C (86°F to 104°F)
45%, 40°C to 5 0°C (104°F to 122°F)
Loading...