Flir S1CA2G Installation

S1CA2G

Ceiling Mount Bracket

VANDAL DOME

Base

Base Cover

PACKAGE CONTENTS

Pendant Cap

Base Cover

Pipe

Base

Allen Bolt M6x8 1pcs
(pre-attached)

Make sure to install in an

Make sure to install in an

Make sure to install in an
area that can support the

area that can support the

area that can support the
weight of the camera and

weight of the camera and

weight of the camera and
accessories.

accessories.

accessories.

Mounting Bolt M8x60 4pcs

Allen Bolt M6x8 1pcs
(pre-attached)

Flat Washer 4pcs
Spring Washer 4pcs
Nut 4pcs

DIMENSIONS - VANDAL DOME (units: mm)

Dome Cover

Camera Module

Stainless Screw
M4x10 3pcs

Dome Cover Screw 3pcs
(supplied with camera)

Ceiling Mount
1pcs

Mounting Bolt Set
M8x60 4pcs

Pendant Cap
1pcs

Allen Key
S5.0 1pcs

Stainless Screw
M4x10 3pcs

Allen Key
S3.0 1pcs

Visit www.irsecurity.com/pro
for the latest compatibility list.

Weight (mount only): 1.0kg / 2.1lbs
Weight (with camera): 2.2kg / 4.9lbs

S1CA2G_INSTALLATION_DIAGRAM_EN_R1

PTZ

Base Cover

Base

Base Cover

Base

Bolt M6x14 3pcs
(supplied with camera)

Mounting Bolt M8x60 4pcs

The pendant cap and stainless steel M4x10
screws are not used to install the PTZ camera.

DIMENSIONS - PTZ (units: mm)

Pipe

Allen Bolt M6x8 1pcs
(pre-attached)

Bracket Connector
(supplied with camera)

Allen Bolt M6x8 1pcs
(pre-attached)

Flat Washer 4pcs
Spring Washer 4pcs
Nut 4pcs

Camera Module

Make sure to install in an area that can support the
weight of the camera and accessories.

Visit www.irsecurity.com/pro for the latest compatibility list.

Weight (mount only): 0.8kg / 1.7lbs
Weight (with camera): 7.7kg / 16.9lbs

NOTE: The dimensions are approximate
maximum values and may vary depending on
PTZ camera model. Check the specications for
your camera for details.