FLIR M364C LR IP Daylight and Thermal Imaging Camera, M332 Thermal Imaging Camera, M364C IP Daylight and Thermal Imaging Camera, M232 IP Thermal Imaging Camera with AR200 Augmented Reality Module Manual

M1xx/M2xx/M3xxSeriesCameraInstallationaddendum

Importantinstallationupdate

Sincethepublicationandprintingofthemanualsuppliedwithyourcamera,themountingprocedureforthecamera
haschanged,followingadditionalinstallationfeedbackfromRaymarine'sdealernetwork.Thefollowingmounting

procedureMUSTbefollowedwhenmountingyourcamera,andsupersedesthemountingproceduresdetailed
intheprintedmanualsuppliedwithyourcamera.

Installationxings

Thefollowingxingsaresuppliedwithyourcamera.Thislistsupersedesthexingsinformationprovidedinthe
printedmanualsuppliedwithyourcamera.Allothersuppliedpartsremainthesameasthoselistedinthemanual.

1.Flatnuts(M6,A4stainless)x2.Mustonlybeusedtoassistinwindingthestudsintothecamera’sbase.

2.Domenuts(M6,A4stainless)x3.Ifneeded,ttostudstocoverexposedends.DoNOTusewithriser.

3.Threadedstud(M6,60mm,A4stainless)x3.

4.Flatwashers(M6,A4stainless)x3.

5.Nylocnuts(M6,A4stainless)x3.

ApplyingLoctite

Beforeinsertingthethreadedstudsintothebaseofthecamera,youMUSTrstapply“Loctite243”threadlocker(or
equivalent),toall3studs.

Important:Ifthesuppliedthreadedstudsarenotlongenoughtoaccommodateallthexingsandthethicknessof
themountingsurface,obtainlongerreplacementmarine-gradestainlesssteelM6threadedstuds(e.g.316/A4).

1.Cleanandde-greasethe3suppliedthreadedstudsandthecamerabaseplate'stappedthreads.

2.Allowtodrybeforeproceedingtothenextstep.

3.Applygenerousamountsof"Loctite243"threadlocker(orequivalent)toeachofthestuds.

4.Insertthethreadedstudsintothecamera'sbaseplateimmediately,ensuringsufcientthreadprotrudes,toallowthe
ttingofwasherandnuts.Ifnecessary,xthesuppliedatnuts(x2)(temporarily)tothestuds,toassistyou

inwindingthestudsfullyintothecamera'sthreads.Discardatnutsoncedone.

5.RemoveanyexcessLoctite.AnyremainingLoctitemustbethoroughlycleanedfromthestudsandbase.

6.AllowtheLoctiteonthethreadedstudstocurefor24hours,beforeproceedingtothenextstep.

Note:Ifusingtherisertomountthecamera,doNOTallowanyLoctitetocomeintocontactwiththeriser,as
theLoctitemaydamagetherisermaterial.

Documentnumber:82429(Rev1)AA;27716;2022-03-31T15:13:23

Date:04-2022

Mountingthecamera

ThefollowingmountingprocedureMUSTbefollowedwhenmountingyourcamera,andsupersedesthemounting
proceduresdetailedintheprintedmanualsuppliedwithyourcamera.

1.Ensurethatyou’vecarefullyfollowedtheinstructionsprovidedinthe“ApplyingLoctite”sectiontoinsertthe

studscorrectlyintothecamerabase.

2.Usethesuppliedmountingtemplatetodrilltheholesforthecamerabase(orriser,ifused),andthecables
(asrequired).

3.Placethegasketonthebottomofthecamera,carefullyaligningthegasketholeswiththethreadedstuds.

Note:Ifmountingthecameraballdown,doNOTtthegasketbetweenthecameraandtheriser.

4.Optionally ,(temporarily)securetherisertothecamerawithafewhandturnsofthenylocnutsonthestuds,to
preventtheriserfromfallingwhileyouconnectthecables.Checkthatthecamera'sgasketremainsrmlyinplace.

Note:Observethecameraforwardmarkingonthetopsurfaceoftheriser.Y oumustensurethattheriserismounted
sothatthecameraisorientedproperly,relativetothevessel'sbow.

5.Connectthecablestothecamera.Ifusingtheriser,loopthecablesroundwithintheriserbasesothattheycanbe
threadedthroughthebottomoftheriser,andintothecableroutingholedrilledinthemountingsurface.

6.Securethecameraassemblytothemountingsurface(orriser,ifused),usingthesuppliedatwashersandnyloc
nuts.Paycarefulattentiontothecorrectarrangementofthexings,asshownintheimageabove.

Note:Ifyouarereplacinganexistingcamerainstallationorhavepurchasedanolderriser,doNOTusethe
existingspringwasherssuppliedwiththecameraorriser.

7.Tightenthenylocnutstoatorqueof5.0-6.0N·m(3.7-4.4lbf·ft).

8.Fitthesuppliedbasesealtotheriser.

9.Securetherisertothemountingsurfaceusingscrewssuitableforthemountingsurfacematerialandthickness.
(Fixingsnotsupplied).

2

M1xx/M2xx/M3xxSeriesCameraInstallationaddendum