![](/html/bf/bf67/bf67d8decff35b212a36852be80f7c20db91b4e627459ceb3d345b291dfb0684/bg1.png)
General description
The FLIR K65 is a robust and reliable infrared camera designed to perform under
extremely severe conditions. The FLIR K65 has an intuitive interface with a design
that makes it easy to control even with a gloved hand. The crisp and clear image
helps you to navigate through smoke and to make quick and accurate decisions.
Benefits:
• Compliance with NFPA 1801-2013.
• Robust and reliable: The FLIR K65 is designed to meet tough operating conditions.
It can withstand a drop from 2 m (6.5′) onto a concrete floor, is water resistant to
IP67, and is fully operational up to 85°C (185°F), and operational up to +150°C
(+302°F) for 15 minutes, and +260°C (+500°F) for 5 minutes.
• Clear and crisp thermal images: The maintenance-free uncooled microbolometer
sensor produces clear and detail-rich images of 320 × 240 pixels which have been
further improved with FSX, a digital image-processing enhancement technique.
Thermal images are presented on a large, bright 4″ display, helping you to
navigate and to make quick and accurate decisions.
• Easy-to-use—also in a gloved firefighter’s hand: An intuitive and simple user
interface allows you to focus on the job. The FLIR K series can be controlled by
just three large buttons on top of the unit. Ideal for a gloved firefighter’s hand.
• Recording.
Imaging and optical data
IR resolution 320 × 240 pixels
Thermal sensitivity/NETD < 30 mK @ +30°C (+86°F)
Field of view (FOV)
51° × 38°
Depth of field 0.84 m to infinity (33 in. to infinity)
P/N: 72202-0303
Copyright
© 2015, FLIR Systems, Inc.
All rights reserved worldwide. Names and marks
appearing herein are either registered trademarks
or trademarks of FLIR Systems and/or its
subsidiaries. All other trademarks, trade names or
company names referenced herein are used for
identification only and are the property of their
respective owners.
Document identity
Publ. No.: 72202-0303
Release:
Commit: 26408
Language: en-US
Modified: 2015-06-04
Formatted: 2015-06-08
Corporate Headquarters
FLIR Systems, Inc.
27700 SW Parkway Ave.
Wilsonville, OR 97070
USA
Telephone: +1-503-498-3547
Website
http://www.flir.com
Customer support
http://support.flir.com
Disclaimer
Specifications subject to change without further
notice. Camera models and accessories subject
to regional market considerations. License
procedures may apply. Products described herein
may be subject to US Export Regulations. Please
refer to exportquestions@flir.com with any
questions.
1 ()
www.flir.com
www. .com
information@itm.com1.800.561.8187
![](/html/bf/bf67/bf67d8decff35b212a36852be80f7c20db91b4e627459ceb3d345b291dfb0684/bg2.png)
P/N: 72202-0303
© 2015, FLIR Systems, Inc.
#72202-0303; r. /26408; en-US
Imaging and optical data
Focal length 9 mm (0.35 in.)
Spatial resolution (IFOV)
2.8 mrad
F-number 1.25
Image frequency 60 Hz
Focus Fixed
Zoom 2× digital zoom
Detector data
Detector type Focal plane array (FPA), uncooled
microbolometer
Spectral range
7.5–13 µm
Pitch 25 µm
Image presentation
Display
4 in. LCD, 320 × 240 pixels, backlit
Auto range
Yes, selectable on/off using FLIR Tools
Contrast optimization Digital image enhancement using FSX
Image presentation modes
Image modes
• IR image
• TI Basic NFPA fire-fighting mode
• Black-and-white fire-fighting mode
• Fire mode
• Search-and-rescue mode
• Heat detection mode
• Thumbnail gallery
Measurement
Object temperature range
• –20°C to +150°C (–4°F to +302°F)
• 0°C to +650°C (+32°F to +1202°F)
Accuracy
±4°C (±7.2°F) or ±4% of reading, for
ambient temperature 10°C to 35°C (+50°
F to 95°F)
Measurement analysis
Spotmeter
1
Automatic hot detection
Heat detection mode (the hottest 20% of
the of scene is colorized)
Isotherm Yes, according to NFPA
Set-up
Set-up commands Local adaptation of units, date and time
formats
Languages English
2 ()
www.flir.com
www. .com
information@itm.com1.800.561.8187
![](/html/bf/bf67/bf67d8decff35b212a36852be80f7c20db91b4e627459ceb3d345b291dfb0684/bg3.png)
P/N: 72202-0303
© 2015, FLIR Systems, Inc.
#72202-0303; r. /26408; en-US
Storage of images
Image storage
Standard JPEG
Storage media Internal flash memory
Image storage capacity 200 files in total
NOTE
The number of files is co-dependent on the
number of saved video clips.
Image storage mode
IR only
File formats
Standard JPEG
Image annotations
Report generation
Separate software (FLIR Tools)
Video recording in camera
Non-radiometric IR video recording
MPEG-4 to internal flash memory
Storage capacity 200 files in total, with a maximum
duration of 5 minutes each.
NOTE
The total number of files is co-dependent on
the number of saved images.
Video streaming
Non-radiometric IR video streaming Uncompressed colorized video using
USB
USB
USB USB Mini-B
Compatibility
Compatible with FLIR software
FLIR Tools
Data communication interfaces
Interfaces
• Update from PC and Mac devices
• Data transfer to and from PC
Power system
Battery type Li Ion
Battery voltage 3.6 V
Battery capacity
4.4 Ah, at +20°C to +25°C (+68°F to +77°
F)
3 ()
www.flir.com
www. .com
information@itm.com1.800.561.8187
![](/html/bf/bf67/bf67d8decff35b212a36852be80f7c20db91b4e627459ceb3d345b291dfb0684/bg4.png)
P/N: 72202-0303
© 2015, FLIR Systems, Inc.
#72202-0303; r. /26408; en-US
Power system
Battery operating time
Approx. 4 hours at +25°C (+77°F)
ambient temperature and typical use.
NOTE
This operating time is independent of camera
mode.
Charging system
• Battery is charged inside the camera
• 2-bay charger
• Optional In-truck charger
Charging time
2 h to 85% capacity, charging status
indicated by LEDs
Charging temperature
0°C to +45°C (+32°F to +113°F)
Power management
Automatic shutdown and sleep mode
Start-up time from sleep mode
< 4 s.
Start-up time
< 17 s. (IR image, no GUI)
Environmental data
Operating temperature range
• –20°C to +85°C (–4°F to +185°F)
• +150°C (+302°F): 15 min.
• +260°C (+500°F): 5 min.
Storage temperature range –40°C to +85°C (–40°F to +185°F)
Humidity (operating and storage) IEC 60068-2-30/24 h 95% relative
humidity +25°C to +40°C (+77°F to +104°
F) / 2 cycles
Relative humidity
95% relative humidity +25°C to +40°C
(+77°F to +104°F) non-condensing
Directives
Certified according to NFPA1801:2013
specification:
• Vibration
• Impact acceleration resistance
• Corrosion
• Viewing surface abrasion
• Heat resistance
• Heat and flame
• Product label durability
EMC
• EN 61000-6-2:2005 (Immunity)
• EN 61000-6-3: 2011 (Emission)
• FCC 47 CFR Part 15 B (Emission)
4 ()
www.flir.com
www. .com
information@itm.com1.800.561.8187