FLIR IRW-Series
IR Inspection Windows
FLIR IR Windows for
Safer Electrical Inspections
Broadband Crystal Lens
Easy PIRma-Lock™ Installation
Quick Access Permanent Hinged Cover
Compatible with All Thermal Cameras
Introducing FLIR IRW-Series
for Safer, More Ef cient Electrical IR Inspections
Opening electrical cabinets to perform IR and visual inspections of
live components is dangerous work, exposing you to the risk of a
hazardous arc ash incident. Out of necessity, it’s also a painstaking,
time-consuming process.
Now you can put the added safet y of new FLIR IR Windows between
you and energized equipment to better protect yourself and eliminate
the need for opening enclosures. Much easier to install and use than
other brands, FLIR IR Windows help you work faster with greater
con dence. Perform inspections more ef ciently and reduce the threat
of arc ash injury signi cantly so you can get more done and stay in
compliance with NFPA 70E requirements.
All FLIR IR Windows feature a secure, permanently-hinged cover that
opens easily with one hand, which means there’s nothing to remove,
drop, mix up, or lose. FLIR’s broadband crystal allows cameras to
capture visible light pictures as well as thermal images and lets
LED and laser illumination pass straight through for clearer visual
assessments.
Combine FLIR IR Windows with a FLIR thermal camera that features
integrated visible light video, lamps, and a laser pointer, and you’ll be
set to get the job done single-handedly.
PIRma-Lock™ Ring Nut
Gasket
Quick-Access Flip Down Cover
Broadband Crystal Lens
Permanent Hinge
Permanent ID Label
Thumb Screw Release
Visit ww w. ir.com, or call 866.477.3687
FLIR IR Windows Features:
Easy Installation – FLIR IR Windows install quickly and securely using
the same design as common conduit connections:
• Only one hole to create for each window
• One simple PIRma-Lock™ ring nut to tighten
• Uses standard US punch tools for hole knockouts
PIRma-Lock™ Reliability – Tried and true locknut technology makes
FLIR’s locking ring an IR window rst:
• Teeth lock tight to the inside of the panel
• Automatically grounds metal components
• No screw holes required that might later strip out
Quick Access Hinged Cover – Simple thumb screw releases the
permanently-hinged IR window cover:
• Easy, ip-open hatch for faster scans
• Prevents dropping, mix-ups, and loss
• Inside label for permanent identi cation
Broadband Crystal IR Window – Lens encased in rugged, anodized
aluminum frame allows indoor & outdoor scans:
• Transmits short, mid and longwave IR images
• Supports visual inspections and fusion features
• Lets laser pointers and illumination shine through
Greater Productivity and ROI – Signi cantly reduces inspection time
for more ef cient assessments within NFPA 70E guidelines:
• Requires only one person instead of three
• Eliminates need for cumbersome PPE
• Helps reduce vast majority of arc ash triggers
One hole to cut.
Easy placement.
FLIR Integrity – FLIR backs IRW-Series windows with comprehensive
testing and a limited lifetime warranty:
• Meets UL, KEMA, and TUV standards and ratings
• Withstands arcs, vibration, and extreme humidity
• Limited Lifetime Warranty against manufacturer defects
Single PIRma-Lock™ ring nut.
General Speci cations FLIR IR Window 2” - IRW-2C FLIR IR Window 3” - IRW-3C FLIR IR Window 4” - IRW-4C
NEMA Environment Type Type 4/12 (outdoor/indoor) Type 4/12 (outdoor/indoor) Type 4/12 (outdoor/indoor)
Voltage Range Any Any Any
Automatically Grounded Yes Yes Yes
Maximum Operating Temperat ure 500°F/260°C 500°F/260°C 500°F/260°C
Body Material Anodized Aluminum Anodized Aluminum Anodized Aluminum
Gasket Material Silicone Silicone Silicone
Hardware Material Steel Steel Steel
Compatable with All FLIR Cameras Yes Yes Yes
PIRma-Lock Installation System Yes Yes Yes
Cover and Fastener Permanently Attached Yes Yes Yes
Single-hole Installation Yes Yes Yes
Thumb Screw and Safe ty Screw Included Yes Yes Yes
Broadband IR -- Short-, Mid-, & Longwave Yes Yes Yes
Visible Light Spectrum Yes Yes Yes
Picture-in-Picture & Fusion Image Blending Yes Yes Yes
Size Speci cations
Overall Height 85.5mm (3.36”) 10 7.4 mm (4 . 2 2 ”) 136 .5mm (5.3 7” )
Overall Width 77mm (3.03”) 99mm (3.89”) 127.44 mm (5.01”)
Overall Thickness 25 .5 m m (1.0 0”) 26.8 6mm (1.0 5”) 2 9. 2 5m m (1.1 5 ” )
Required Actual Hole Diameter (Nominal) 60.3mm (2-3/8”) 88.9m m ( 3 -1/ 2 ” ) 114.3mm (4-1/2”)
Greenlee Punch 76BB 739BB 742 B B
Recommended Max Panel Thickness 3.2mm (1/8”) 3.2mm (1/8”) 3.2mm (1/8”)
Optic Speci cations
Optic Diameter 50mm (1.9 7” ) 75mm (2.95” ) 95 m m ( 3.74 ”)
Viewing Aperture Diameter 45mm (1.77”) 69 mm (2.71” ) 89m m (3.50 ”)
Viewing Aperture Area 1590mm² (2.46in²) 3739mm² (5.79in²) 6221mm² (9.64in²)
Optic Maximum Temperature 1355.6°C (2474°F) 1355.6°C (2474°F) 1355.6°C (2474°F)
Ratings & Testing
UL Component Recognition (UL 50V) Yes Yes Yes
UL 50 / NEMA Environment Ra ting Ty p e 4/12 Ty p e 4/12 Ty p e 4/12
Arc Flash Testing, IEC 62271-200 (KEMA) 5kV, 63k A for 30 C ycles at 60Hz
IP Rating, IEC 60529 (TUV) IP67 IP67 IP67
Vibration Testing, IEC 60 068-2-6 (TUV) 100 m/s^2 Vibration Wit hstand
Humidi ty Testing, IEC 60068-2-3 (TUV) Extreme Humidity Withstand
Mechanical Testing, ANSI/IEEE C37.20.2 section A3.6 (TUV) Impact and Load Resist ant Cover
Maximum Pullout Strength 657 kg (1450 lbs) 1655 kg (3650 lbs) 1678 kg (3700 lbs)
Other
Warrant y Limited Lifetime Warranty Against Manufacturer Defect s
BOSTON
FLIR Systems, Inc.
25 Esquire Road
North Billerica, MA 01862
USA
PH: +1 866.477.3687
PORTLAND
Corporate Headquarters
FLIR Systems, Inc.
27700 SW Parkway Ave.
Wilsonville, OR 97070
USA
PH: +1 866.477.3687
SANTA BARBARA
FLIR Systems, Inc.
70 Castilian Dr.
Goleta, CA 93117
USA
PH: +1 866.477.3687
PH: +1 978.901.8000
www. ir.com
NASDAQ: FLIR
Copy righ t ©2011, FLIR Syst ems, Inc orporate d. All ot her bra nd and product n ames ar e trad emark s of FLIR Syste ms, Incorpora ted.
Imagery used for illustr atio n purpo ses onl y. 1008965
CANADA
FLIR Systems, Ltd.
920 Shelt on Ct.
Burlington, ON L7L 5K6
Canada
PH: +1 800.613.0507
Loading...