Names and marks appearing on the products herein are either registered
trademarks or trademarks of FLIR Commercial Systems, Inc. and/or its
subsidiaries. All other trademarks, trade names, or company names
referenced herein are used for identification only and are the property of their
respective owners.
This product is protected by patents, design patents, patents pending, or
design patents pending.
If you have questions that are not covered in this manual, or need service,
contact FLIR Commercial Systems, Inc. customer support at 805.964.9797
for additional information prior to returning a camera.
This documentation is subject to change without notice.
This equipment must be disposed of as electronic waste.
Contact your nearest FLIR Commercial Systems, Inc.
representative for instructions on how to return the product to
FLIR for proper disposal.
This document is controlled to FLIR Technology Level EAR 1. The information
contained in this document is proprietary and/or restricted and pertains to a
dual use product controlled for export by the Export Administration
Regulations (EAR). This document and data disclosed herein or herewith is not
to be reproduced, used, or disclosed in whole or in part to anyone without the
written permission of FLIR Systems, Inc. Diversion contrary to US law is
prohibited. US Department of Commerce authorization is not required prior to
export or transfer to foreign persons, parties, or uses otherwise prohibited.
The HM-Series handheld thermal imaging camera gives every
mariner the power to see at night like never before.
The HM-Series camera gives you the power to see more—and to see
farther—than every other night vision technology around:
•When you have the HM-Series camera on deck, at night in dark
anchorages you will be able to see your surroundings, even when
it is cloudy and there is no moonlight or starlight.
•See clearly in total darkness—unlike other night vision systems,
HM-Series cameras require no light at all
•See logs, rocks, land, and other hazards that radar can miss
•Boat with confidence at night knowing that you can see harbor
entrances and navigation channels in total darkness
•See with FLIR’s award-winning maritime thermal night vision
technology in the palm of your hand
Your Vision
432-0004-00-10, Revision 1001
Image with HM-Series Camera
1—IntroductionHM-Series Operator’s Manual
1–1HM-Series Camera Features
•Rugged design—Built to withstand the demands of maritime use.
It is fully submersible (IP67).
•240×180 or 320×240 microbolometer sensor for excellent
image quality and clarity
•Hot Shoe—Provides convenient power input and video output.
•Choose the 19 mm lens with 24° field of view or include a
removable 2× optical extender.
•Two-sided Hand Strap—Accommodates both left-handed and
right-handed users.
•Software upgrades using an SD card.
•SD Card Slot—Allows for storing captured still images and video
(HM-324 XP+
only) on the removable SD card.
1
•USB 2.0 Connection—Rapid transfer of files from the camera to
a PC.
1
•Four rechargeable AA NiMH batteries—Provides up to 5 hours of
camera operation on a single charge.
1. Available only with the HM-224 Pro or HM-324 XP+ models.
2January 2010
HM-Series Operator’s Manual1—Introduction
1–2Cautions
Do not disassemble the camera enclosure. Disassembly can
cause permanent damage and will void the warranty.
Keep the compartment covers closed to avoid exposing the
cameras electronics to water or debris.
Do not point the camera directly at extremely high-intensity
radiation sources, such as the sun, lasers, arc welders, etc.
Only use the auxiliary power adapters provided with your
HM-Series camera (car adapter or AC adapter). Connecting the
camera to an improper power source may damage the camera
and void your warranty.
Be careful not to leave fingerprints on the camera’s infrared
optics.
Caution!
The camera window has an anti-reflective coating and should only
be cleaned with low pressure fresh water and a lens cloth.
Improper care of the camera window can cause damage to the
anti-reflective coating, degrade the camera’s performance, and
void the camera warranty.
432-0004-00-10, Revision 1003
1—IntroductionHM-Series Operator’s Manual
4January 2010
2 Getting Started
The HM-Series cameras shown below are available with the features,
options, and accessories described in this manual.
19 mm Lens Configuration
19 mm Lens with 2× Extender
Focus Ring
432-0004-00-10, Revision 1005
2—Getting StartedHM-Series Operator’s Manual
2–1Shipping Kits
Refer to the packing list enclosed with your camera shipment to
determine the actual contents of your camera package.
•HM-224 and HM-324 XP Cameras
•HM-224 Pro and HM-324 XP+ Cameras
•In addition to the camera, Quick Start card, and Documentation/
Training CD or DVD; the following items are included in the
camera package:
Neck Lanyard
USB Cable
Video Output Cable
AC Power Adaptor
1-Gb SD Card
Hot Shoe
AA Rechargeable Batteries
Car Adaptor
6January 2010
HM-Series Operator’s Manual2—Getting Started
2–2Options and Accessories
2× Optical Extender for 19 mm lens:
Note
The 2× Optical Extender is not waterproof and should not be used
in wet environments.
The attachable 2× Optical Extender lens doubles the range of
performance when needed, without sacrificing the situational
awareness benefits of the wide field of view lens.
Manual Focus Ring
Front Lens Cover
Lens Release Lever
432-0004-00-10, Revision 1007
Rear Lens Cover
2—Getting StartedHM-Series Operator’s Manual
Camera Case
Protection for your camera and all accessories.
8January 2010
Loading...
+ 26 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.