FB-Series Camera
Items Included in Kit
Screws
Mounting
Power
template
plug
and anchors
Alarm
plug
To r x
wrench
Tor x sc r ew
(spare)
Quick Connect Guide
Caution!
Do not disassemble the FB-Series camera. Damage to the camera can occur
as the result of careless handling or electrostatic discharge (ESD).
Before installing the FB-Series camera you should read and understand the
following documents which provide details regarding mechanical dimensions
and installation safety.
• FLIR FB-Series Installation Manual (427-0064-00-12)
Power: Power Over Ethernet (PoE) or 12 Vdc or 24 Vac
Power terminal plug: wire size from 16 AWG to 20 AWG
Analog Video Cable: BNC-terminated RG-59/U solid-center coax cable
Ethernet Cable: Cat5e or Cat6
I/O terminal plug: not supported
FLIR Systems, Inc.
6769 Hollister Avenue
Goleta, CA 93117
USA
Support: http://www.flir.com/security/display/?id=71083
427-0064-00-28 Rev 100 August 2017
Corporate Headquarters
27700 SW Parkway Ave.
Wilsonville, OR 97070
USA
Figure 1-1: Camera Connections
1
7
6
5234
Connection Purpose
1BNC Analog video
2 Green barrel not supported
3
Purple D-
not supported
Grey D+
4 Pink barrel not supported
5Ethernet
PoE power, communications, IP video
stream
6 5-pin plug not supported
7 2-pin plug Vac or Vdc power
427-0064-00-28 Rev 100 August 2017